Locating dowel sleeves (DAS10)
Outline drawing
Dimensional Drawing / Product Specifications
DAS
DASP (With Tapped Hole)
[M]Material: EN 1.3505 Equiv. [H] Hardness: 55 HRC or more
Specification Table
| [ T ] | D | L | d | R | M × P (Removal Tap) | Part Number | |
|---|---|---|---|---|---|---|---|
| Type | No. | ||||||
| +0.010 +0.005 | 6 | 8 | 4.2 | 0.4 | — | DAS DASP | ※4 |
| 8 | 10 | 5.2 | 0.4 | 6 × 1.0 | 5 | ||
| 10 | 12 | 6.3 | 0.6 | 8 × 1.25 | 6 | ||
| 12 | 16 | 8.4 | 0.7 | 10 × 1.5 | 8 | ||
| 14 | 20 | 10.4 | 0.8 | 12 × 1.75 | 10 | ||
| 18 | 24 | 12.5 | 0.8 | 14 × 2.0 | 12 | ||
[ ! ] *No.4 is for DAS only.
[!] DASP is thinner than DAS. Therefore, use DAS or one size larger for the areas where rigidity is required.
Ordering Example
| Part Number |
| DAS 6 |
Related Information
■ Features
·Same level of positioning as dowel pin is possible.
· Positioning and tightening can be done at one time, and space can be saved.
·Three-layer plates can also be positioned.
·When press-fitting into the plate, the positioning ring deforms elastically.
■How to install the positioning ring
| (1) | Hole Machining Dimension to Plate |
| Hole Machining on Fixed Plate (Press Fit) |
Actual O.D. of Positioning Ring 0/-0.015
| Hole Machining on Plate on Removable Side (Gaps, Transition-Fit) |
Actual O.D. of Positioning Ring +0.015/0
These hole machining dimensions vary depending on the plate material, hardness, and applications, so use this as a reference.
| (2) | If positioning accuracy is required and both ends are press-fitted, apply removal tap or wedge to the plate to facilitate removal. | |
Fixed Side Removable Side Installation Example
| ||
App. Example
indicates positioning rings | ||
