MISUMI Top
Plastic Mold Components
Ejector Pins
Straight Ejector Pins
Ejector pins, cylindrical, lateral gas venting
Ejector pins / cylindrical head / EN 1.3343 Equiv. / gas venting / dimensions Configurable

Configure

Shaft diameter tolerance (Reference tolerance)
- -0.01/-0.02
- 0/-0.005
L dimension tolerance (Reference tolerance)
- +0.02/0
- +0.02/0 or +0.05/0
Head thickness
D/P (Shaft diameter)(mm)
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1.2
- 1.5
- 2
- 2.5
- 3
- 3.5
- 4
- 4.5
- 5
- 5.5
- 6
- 6.5
- 7
- 8
- 10
- 12
[0.6-11.99/0.01mm units]
Gas release shape
- Single flat cutting
- Four flats cutting
No. (Nominal diameter)(mm)
- 0.7
- 0.8
- 0.9
- 1
- 1.5
- 2
- 2.5
- 3
- 3.5
- 4
- 4.5
- 5
- 5.5
- 6
- 6.5
- 7
- 8
- 10
- 12
L (L dimension)(mm)
[40-350/0.01mm units]
E(mm)
[0.02-0.05/0.01mm units]
Type
CAD
- 2D
- 3D

Ejector pins / cylindrical head / EN 1.3343 Equiv. / gas venting / dimensions Configurable

CatalogP.89

Part number:

Still undefined. 218 possible part numbers found.

Outline drawing
Part number list
More Information
Catalog

Outline drawing

Part number list

Number of items

Part number

GW-EPH-L0.6-[40-150/0.01]-E[0.02-0.05/0.01]

GW-EPH-L0.7-[40-150/0.01]-E[0.02-0.05/0.01]

GW-EPH-L0.8-[40-150/0.01]-E[0.02-0.05/0.01]

GW-EPH-L0.9-[40-150/0.01]-E[0.02-0.05/0.01]

GW-EPH-L1-[40-200/0.01]-E[0.02-0.05/0.01]

GW-EPH-L1.2-[40-200/0.01]-E[0.02-0.05/0.01]

GW-EPH-L1.5-[40-250/0.01]-E[0.02-0.05/0.01]

GW-EPH-L2-[40-300/0.01]-E[0.02-0.05/0.01]

GW-EPH-L2.5-[40-300/0.01]-E[0.02-0.05/0.01]

GW-EPH-L3-[40-350/0.01]-E[0.02-0.05/0.01]

GW-EPH-L3.5-[40-350/0.01]-E[0.02-0.05/0.01]

GW-EPH-L4-[40-350/0.01]-E[0.02-0.05/0.01]

GW-EPH-L4.5-[40-350/0.01]-E[0.02-0.05/0.01]

GW-EPH-L5-[40-350/0.01]-E[0.02-0.05/0.01]

GW-EPH-L5.5-[40-350/0.01]-E[0.02-0.05/0.01]

GW-EPH-L6-[40-350/0.01]-E[0.02-0.05/0.01]

GW-EPH-L6.5-[40-350/0.01]-E[0.02-0.05/0.01]

GW-EPH-L7-[40-350/0.01]-E[0.02-0.05/0.01]

GW-EPH-L8-[40-350/0.01]-E[0.02-0.05/0.01]

GW-EPH-L10-[40-350/0.01]-E[0.02-0.05/0.01]

GW-EPH-L12-[40-350/0.01]-E[0.02-0.05/0.01]

GW-EPHB0.7-[40-100/0.01]-P[0.6-0.69/0.01]-E[0.02-0.05/0.01]

GW-EPHB0.8-[40-150/0.01]-P[0.7-0.79/0.01]-E[0.02-0.05/0.01]

GW-EPHB0.9-[40-150/0.01]-P[0.8-0.89/0.01]-E[0.02-0.05/0.01]

GW-EPHB1-[40-200/0.01]-P[0.9-0.99/0.01]-E[0.02-0.05/0.01]

GW-EPHB1.5-[40-200/0.01]-P[1-1.49/0.01]-E[0.02-0.05/0.01]

GW-EPHB2-[40-250/0.01]-P[1.5-1.99/0.01]-E[0.02-0.05/0.01]

GW-EPHB2.5-[40-300/0.01]-P[2-2.49/0.01]-E[0.02-0.05/0.01]

GW-EPHB3-[40-300/0.01]-P[2.5-2.99/0.01]-E[0.02-0.05/0.01]

GW-EPHB3.5-[40-300/0.01]-P[3-3.49/0.01]-E[0.02-0.05/0.01]

GW-EPHB4-[40-300/0.01]-P[3.5-3.99/0.01]-E[0.02-0.05/0.01]

GW-EPHB4.5-[40-350/0.01]-P[4-4.49/0.01]-E[0.02-0.05/0.01]

GW-EPHB5-[40-350/0.01]-P[4.5-4.99/0.01]-E[0.02-0.05/0.01]

GW-EPHB5.5-[40-350/0.01]-P[5-5.49/0.01]-E[0.02-0.05/0.01]

GW-EPHB6-[40-350/0.01]-P[5.5-5.99/0.01]-E[0.02-0.05/0.01]

GW-EPHB6.5-[40-350/0.01]-P[6-6.49/0.01]-E[0.02-0.05/0.01]

GW-EPHB7-[40-350/0.01]-P[6.5-6.99/0.01]-E[0.02-0.05/0.01]

GW-EPHB8-[40-350/0.01]-P[7-7.99/0.01]-E[0.02-0.05/0.01]

GW-EPHB10-[40-350/0.01]-P[8-9.99/0.01]-E[0.02-0.05/0.01]

GW-EPHB12-[40-350/0.01]-P[10-11.99/0.01]-E[0.02-0.05/0.01]

GW-EPHBE0.7-[40-100/0.01]-P[0.6-0.69/0.01]-E[0.02-0.05/0.01]

GW-EPHBE0.8-[40-150/0.01]-P[0.7-0.79/0.01]-E[0.02-0.05/0.01]

GW-EPHBE0.9-[40-150/0.01]-P[0.8-0.89/0.01]-E[0.02-0.05/0.01]

GW-EPHBE1-[40-200/0.01]-P[0.9-0.99/0.01]-E[0.02-0.05/0.01]

GW-EPHBE1.5-[40-200/0.01]-P[1-1.49/0.01]-E[0.02-0.05/0.01]

GW-EPHBE2-[40-250/0.01]-P[1.5-1.99/0.01]-E[0.02-0.05/0.01]

GW-EPHBE2.5-[40-300/0.01]-P[2-2.49/0.01]-E[0.02-0.05/0.01]

GW-EPHBE3-[40-300/0.01]-P[2.5-2.99/0.01]-E[0.02-0.05/0.01]

GW-EPHBE3.5-[40-300/0.01]-P[3-3.49/0.01]-E[0.02-0.05/0.01]

GW-EPHBE4-[40-300/0.01]-P[3.5-3.99/0.01]-E[0.02-0.05/0.01]

GW-EPHBE4.5-[40-350/0.01]-P[4-4.49/0.01]-E[0.02-0.05/0.01]

GW-EPHBE5-[40-350/0.01]-P[4.5-4.99/0.01]-E[0.02-0.05/0.01]

GW-EPHBE5.5-[40-350/0.01]-P[5-5.49/0.01]-E[0.02-0.05/0.01]

GW-EPHBE6-[40-350/0.01]-P[5.5-5.99/0.01]-E[0.02-0.05/0.01]

GW-EPHBE6.5-[40-350/0.01]-P[6-6.49/0.01]-E[0.02-0.05/0.01]

GW-EPHBE7-[40-350/0.01]-P[6.5-6.99/0.01]-E[0.02-0.05/0.01]

GW-EPHBE8-[40-350/0.01]-P[7-7.99/0.01]-E[0.02-0.05/0.01]

GW-EPHBE10-[40-350/0.01]-P[8-9.99/0.01]-E[0.02-0.05/0.01]

GW-EPHBE12-[40-350/0.01]-P[10-11.99/0.01]-E[0.02-0.05/0.01]

GW-EPHE-L0.6-[40-150/0.01]-E[0.02-0.05/0.01]

Shaft diameter tolerance (Reference tolerance)

L dimension tolerance (Reference tolerance)

Head thickness

D/P (Shaft diameter)

(mm)

Gas release shape

No. (Nominal diameter)

(mm)

L (L dimension)

(mm)

RoHS?

Minimum order quantity

0/-0.005	+0.02/0	4mm(T4)	0.6	Single flat cutting	-	40 ～ 150	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0	4mm(T4)	0.7	Single flat cutting	-	40 ～ 150	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0	4mm(T4)	0.8	Single flat cutting	-	40 ～ 150	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0	4mm(T4)	0.9	Single flat cutting	-	40 ～ 150	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0	4mm(T4)	1	Single flat cutting	-	40 ～ 200	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0	4mm(T4)	1.2	Single flat cutting	-	40 ～ 200	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	1.5	Single flat cutting	-	40 ～ 250	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	2	Single flat cutting	-	40 ～ 300	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	2.5	Single flat cutting	-	40 ～ 300	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	3	Single flat cutting	-	40 ～ 350	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	3.5	Single flat cutting	-	40 ～ 350	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	4	Single flat cutting	-	40 ～ 350	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	4.5	Single flat cutting	-	40 ～ 350	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	5	Single flat cutting	-	40 ～ 350	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	5.5	Single flat cutting	-	40 ～ 350	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	6	Single flat cutting	-	40 ～ 350	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	6.5	Single flat cutting	-	40 ～ 350	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	7	Single flat cutting	-	40 ～ 350	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	8	Single flat cutting	-	40 ～ 350	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	10	Single flat cutting	-	40 ～ 350	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	12	Single flat cutting	-	40 ～ 350	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0	4mm(T4)	0.6 ～ 0.69	Single flat cutting	0.7	40 ～ 100	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0	4mm(T4)	0.7 ～ 0.79	Single flat cutting	0.8	40 ～ 150	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0	4mm(T4)	0.8 ～ 0.89	Single flat cutting	0.9	40 ～ 150	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0	4mm(T4)	0.9 ～ 0.99	Single flat cutting	1	40 ～ 200	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	1 ～ 1.49	Single flat cutting	1.5	40 ～ 200	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	1.5 ～ 1.99	Single flat cutting	2	40 ～ 250	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	2 ～ 2.49	Single flat cutting	2.5	40 ～ 300	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	2.5 ～ 2.99	Single flat cutting	3	40 ～ 300	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	3 ～ 3.49	Single flat cutting	3.5	40 ～ 300	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	3.5 ～ 3.99	Single flat cutting	4	40 ～ 300	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	4 ～ 4.49	Single flat cutting	4.5	40 ～ 350	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	4.5 ～ 4.99	Single flat cutting	5	40 ～ 350	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	5 ～ 5.49	Single flat cutting	5.5	40 ～ 350	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	5.5 ～ 5.99	Single flat cutting	6	40 ～ 350	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	6 ～ 6.49	Single flat cutting	6.5	40 ～ 350	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	6.5 ～ 6.99	Single flat cutting	7	40 ～ 350	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	7 ～ 7.99	Single flat cutting	8	40 ～ 350	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	8 ～ 9.99	Single flat cutting	10	40 ～ 350	0.02 ～ 0.05	10	1 pieces
0/-0.005	+0.02/0 or +0.05/0	4mm(T4)	10 ～ 11.99	Single flat cutting	12	40 ～ 350	0.02 ～ 0.05	10	1 pieces
-0.01/-0.02	+0.02/0	4mm(T4)	0.6 ～ 0.69	Single flat cutting	0.7	40 ～ 100	0.02 ～ 0.05	10	1 pieces
-0.01/-0.02	+0.02/0	4mm(T4)	0.7 ～ 0.79	Single flat cutting	0.8	40 ～ 150	0.02 ～ 0.05	10	1 pieces
-0.01/-0.02	+0.02/0	4mm(T4)	0.8 ～ 0.89	Single flat cutting	0.9	40 ～ 150	0.02 ～ 0.05	10	1 pieces
-0.01/-0.02	+0.02/0	4mm(T4)	0.9 ～ 0.99	Single flat cutting	1	40 ～ 200	0.02 ～ 0.05	10	1 pieces
-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	1 ～ 1.49	Single flat cutting	1.5	40 ～ 200	0.02 ～ 0.05	10	1 pieces
-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	1.5 ～ 1.99	Single flat cutting	2	40 ～ 250	0.02 ～ 0.05	10	1 pieces
-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	2 ～ 2.49	Single flat cutting	2.5	40 ～ 300	0.02 ～ 0.05	10	1 pieces
-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	2.5 ～ 2.99	Single flat cutting	3	40 ～ 300	0.02 ～ 0.05	10	1 pieces
-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	3 ～ 3.49	Single flat cutting	3.5	40 ～ 300	0.02 ～ 0.05	10	1 pieces
-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	3.5 ～ 3.99	Single flat cutting	4	40 ～ 300	0.02 ～ 0.05	10	1 pieces
-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	4 ～ 4.49	Single flat cutting	4.5	40 ～ 350	0.02 ～ 0.05	10	1 pieces
-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	4.5 ～ 4.99	Single flat cutting	5	40 ～ 350	0.02 ～ 0.05	10	1 pieces
-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	5 ～ 5.49	Single flat cutting	5.5	40 ～ 350	0.02 ～ 0.05	10	1 pieces
-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	5.5 ～ 5.99	Single flat cutting	6	40 ～ 350	0.02 ～ 0.05	10	1 pieces
-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	6 ～ 6.49	Single flat cutting	6.5	40 ～ 350	0.02 ～ 0.05	10	1 pieces
-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	6.5 ～ 6.99	Single flat cutting	7	40 ～ 350	0.02 ～ 0.05	10	1 pieces
-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	7 ～ 7.99	Single flat cutting	8	40 ～ 350	0.02 ～ 0.05	10	1 pieces
-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	8 ～ 9.99	Single flat cutting	10	40 ～ 350	0.02 ～ 0.05	10	1 pieces
-0.01/-0.02	+0.02/0 or +0.05/0	4mm(T4)	10 ～ 11.99	Single flat cutting	12	40 ～ 350	0.02 ～ 0.05	10	1 pieces
-0.01/-0.02	+0.02/0	4mm(T4)	0.6	Single flat cutting	-	40 ～ 150	0.02 ～ 0.05	10	1 pieces

Unit price (excluding VAT)(Unit price including VAT)	Standard shipping days

- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote
- ( - )	Quote

Catalog

Products homepage

Catalog (2-page spread)

Ejector pins / cylindrical head / EN 1.3343 Equiv. / gas venting / dimensions Configurable

Outline drawing

Part number list

More Information

Catalog