Register
Configure
  • Material
  • D/P (Shaft diameter)(mm)
  • L (L dimension)(mm)
      [15-100/0.01mm units]
    • DC (Gas release section diameter)(mm)
        [1.42-1.5/0.005mm units]
      • Extend the flat section SV to the bottom
      • N (Tip diameter length)(mm)
          [0.3-10/0.1mm units]
        • Type
        • CAD

        Additional options

        • Single flat cutting [KC](mm)
            [0.75-1.4/0.05mm units]
          • Two flats cutting [WKC](mm)
              [0.75-1.4/0.05mm units]
            • Varied width parallel flats cutting [KAC](mm)
                [0.75-1.4/0.05mm units]
              • Varied width parallel flats cutting [KBC](mm)
                  [0.8-1.4/0.1mm units]
                • Head diameter change [HC](mm)
                    [1.5-2.9/0.1mm units]
                  • Head diameter change (Precision) [HCC](mm)
                      [2-2.6/0.1mm units]
                    • Head thickness change [TC](mm)
                        [1.5-3.9/0.1mm units]
                      • Relief under the head
                      MISUMI

                      Core pins / cylindrical / with head / HSS, tool steel / D 0.005, L 0.01mm / gas venting (GV-CPV-L1.5-[15-100/0.01]-DC[1.42-1.5/0.005]-N[0.3-10/0.1]-SVC)

                      Core pins / cylindrical / with head / HSS, tool steel / D 0.005, L 0.01mm / gas venting

                      Part number:

                      GV-CPV-L1.5-[15-100/0.01]-DC[1.42-1.5/0.005]-N[0.3-10/0.1]-SVC
                      Clear
                      Quantity:

                      Outline drawing

                      Part number list

                      Number of items
                    • 1
                      • Part number
                      GV-CPV-L1.5-[15-100/0.01]-DC[1.42-1.5/0.005]-N[0.3-10/0.1]-SVC

                      Material

                      D/P (Shaft diameter)

                      (mm)

                      No. (Nominal diameter)

                      (mm)

                      L (L dimension)

                      (mm)

                      DC (Gas release section diameter)

                      (mm)

                      Extend the flat section SV to the bottom

                      N (Tip diameter length)

                      (mm)

                      PC (Gas release section diameter)

                      (mm)

                      SV (Gas release facet cutting length)

                      (mm)

                      When DC = D, DCX is applied

                      When PC=P, PCX is applied

                      		RoHS?Minimum order quantity
                      SKH51
                      1.5
                      -
                      15 ～ 100
                      1.42 ～ 1.5
                      SVC
                      0.3 ～ 10
                      -
                      -
                      -
                      -
                      10
                      1 pieces
                      Unit price (excluding VAT)(Unit price including VAT)
                      Standard shipping days
                      -
                      ( - )
                      Quote
                    • 1

                      • More Information