• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Cantilever Shafts / stepped / tapered external thread, annular groove / spanner flat (Part Numbers - CAD Download)

Cantilever Shafts / stepped / tapered external thread, annular groove / spanner flat
View the FAQ (7)

MISUMI

MISUMI

Data sheet

Unit еxample related to this product
Intermittent Rotary Drive by Air Cylinder
Search for оther еxamples

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Back to the Category Cantilever Shafts/Cantilever Bolts

Technical Drawing - Cantilever Shafts

Cantilever Shafts/Pilot/Standard/Threaded/w Retaining Ring Groove:Related Image
Open the technical drawing in the new window

Available dimensions and tolerances can be found under the tab More information.
 

Basic Properties (e.g., material, hardness, coating, tolerance) - Cantilever Shafts

Type   Material   Surface Treatment
Thread Length FixedThread Length Configurable
FXCAFXNCAEN 1.1191 Equiv.Black Oxide
PFXCAPFXNCAElectroless Nickel Plating
SFXCASFXNCAEN 1.4301 Equiv.-
HFXCA-EN 1.7220 Equiv.
Hardness: 35 ~ 40HRC		Black Oxide

Further specifications can be found under the tab More information.
 

Composition of a Product Code - Cantilever Shafts

Part Number-Y-F-G-N
FXCA12
LXNCA20		-
-		12
25		-
-		F15
F30		-
-		G6
G10
-
N40

Alterations - Cantilever Shafts

Cantilever Shafts/Pilot/Standard/Threaded/w Retaining Ring Groove:Related Image

General Information - Cantilever Shafts

Cantilever bins with retaining ring groove - cantilever pin with external thread - cantilever pin with thread - cantilever pin with collar - cantilever pin with shoulder - cantilever pin with female thread - cantilever pin with flange - cantilever pin with flange and collar

 

Selection details of cantilever shafts/cantilever bolts

- Material: stainless steel, steel, tempered steel

- Coatings: untreated, burnished, nickel-plated

- Fastening: retaining ring, internal thread, external thread, centring collar with internal thread

- ISO tolerance: g6

- Thread: M3 to M20

- Straightness: up to 0.02 mm

- Roundness: up to 0.02 mm

- Shaft diameter: 3 to 50 mm

-Length: 3 to 150 mm
 

Description/Basics

They are basically used to support rotary rolling bearings. The support position can be precisely determined by its configurability. The different mounting variants offer a compact and space-saving option for many applications, e.g., to accommodate ball bearings.
Cantilever shafts with collar or shoulder are well suited to determine a support position. The collar serves as a contact surface for the bearing inner wheel. Since the collar of the cantilever shaft can be configured, individual adaptation is simple. The variant [YKC] offers the option of a particularly precise axle bolt with collar, with a length tolerance of +/- 0.05 mm. Due to this property, an additional washers can be omitted with this cantilever shaft.
The cantilever shafts are also available with double collars or double offset. These are suitable for idler pulleys with a small diameter, since the reduced additional shoulder can prevent grinding of the idler pulley.
Cantilever shafts with retaining ring groove (groove) are the most commonly used bearing bolts, because the retaining rings allows for easy assembly and disassembly. The cantilever shafts including the retaining ring can be delivered with the [SET] option. We also offer threaded cantilever shafts that can be selected with external threads or internal threads.
As a special form, our product range offers cantilever shafts with flanges. Due to the large contact surface, higher forces can be absorbed and distributed more evenly compared to conventional cantilever shafts. If you want to attach ball bearings that also have to withstand axial forces, for example, the cantilever shaft with flange offers a good solution. Due to its versatility, the cantilever shaft with flange can be used for a wide variety of design solutions.
Our product range includes various drives for assembly. From the typical hexagon to spanner flat, to additional cross holes with threads that can be used for example for a tension application for clamping devices.

The field of application of cantilever shafts in mechanical engineering is fundamentally very large. They are utilised in synchronous drives, chain transmission or in various tasks in device construction
Bearing pins can be used in combination with ball bearings or plain bearing bushings. Among other things, you can select roller idlers (with rolling bearings), idler pulleys or timing pulleys. As an alternative for limited installation space, we offer cam rollers, which come assembled and ready to install consisting of cantilever shafts and rolling bearings.
Bearing pins are also often used in conjunction with links to ensure different movement sequences.
For high loads, we offer the cantilever shafts made of heat-treated steel, which are produced to be wear-resistant and durable with a hardness of up to 40HRC.

Our product range also offers suitable screws and nuts for fastening cantilever shafts.

 

Application Examples - Cantilever Shafts

Application example - cantilever pin with idler pulley - cantilever pin with female thread - shaft for idler pulley - bolt for idler pulley - cantilever bolt with thread

Application example: deflection roller
(1) Cantilever shaft, (2) Idler pulley, (3) Spacer washer, (4) Mounting angle, (5) Screw, (6) Mounting plate

Application example - cantilever pin with chain idler - cantilever pin with centring collar - cantilever pin double offset - cantilever pin with double collar - cantilever pin with female thread

Application example: chain idlers
(1) Cantilever shafts, (2) Chain idlers, (3) Spacer washer, (4) Screw

Application example - cantilever pin with clamping device - cantilever pin for clamping device - cantilever pin with cross hole and thread - cantilever pin with male thread - cantilever pin with thread - roller tensioner with adjusting screw

Application example: idler pulley
(1) Cantilever shaft, (2) Locknut, (3) Washer, (4) Idler pulley, (5) Threaded stopper block, (6) Adjusting screw

Application example - cantilever pin with plain bearing bushing - cantilever pin with retaining ring - cantilever pin with male thread - cantilever pin with articulated arm - cantilever pin with thrust washer - cantilever pin with thread

Application example: link with plain bearing bushing
(1) Cantilever shaft, (2) Retaining ring, (3) Links, (4) Plain bearing bushing, (5) Thrust washer

 

Industrial Applications

3D printer industry
Automotive industry
Pharmaceutical industry
Packaging industry

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. 3
  4. Next >>
Part Number
FXCA3-[2-30/1]-F[3-50/1]-G[3-8/1]
FXCA3A-[2-30/1]-F[3-50/1]-G[3-8/1]
FXCA4-[2-30/1]-F[3-50/1]-G[3-8/1]
FXCA4A-[2-30/1]-F[3-50/1]-G[3-8/1]
FXCA5-[2-30/1]-F[3-50/1]-G[3-8/1]
FXCA5A-[2-30/1]-F[3-50/1]-G[3-8/1]
FXCA6-[2-60/1]-F[5-100/1]-G[5-10/1]
FXCA6A-[2-60/1]-F[5-100/1]-G[5-10/1]
FXCA8-[2-60/1]-F[5-100/1]-G[5-10/1]
FXCA8A-[2-60/1]-F[5-100/1]-G[5-10/1]
FXCA10-[2-60/1]-F[5-100/1]-G[5-10/1]
FXCA10A-[2-60/1]-F[5-100/1]-G[5-10/1]
FXCA12-[2-60/1]-F[10-150/1]-G[5-15/1]
FXCA13-[2-60/1]-F[10-150/1]-G[5-15/1]
FXCA15-[2-60/1]-F[10-150/1]-G[5-15/1]
FXCA16-[2-60/1]-F[10-150/1]-G[5-15/1]
FXCA17-[2-60/1]-F[10-150/1]-G[5-20/1]
FXCA18-[2-60/1]-F[10-150/1]-G[5-20/1]
FXCA20-[4-75/1]-F[10-150/1]-G[5-20/1]
FXCA20A-[4-75/1]-F[10-150/1]-G[5-20/1]
FXCA22-[4-75/1]-F[10-150/1]-G[5-20/1]
FXCA22A-[4-75/1]-F[10-150/1]-G[5-20/1]
FXCA25-[4-75/1]-F[10-150/1]-G[5-20/1]
FXCA25A-[4-75/1]-F[10-150/1]-G[5-20/1]
FXCA30-[4-75/1]-F[10-150/1]-G[5-20/1]
FXCA30A-[4-75/1]-F[10-150/1]-G[5-20/1]
FXNCA3-[2-30/1]-F[3-50/1]-G[3-8/1]-N[3-6/1]
FXNCA3A-[2-30/1]-F[3-50/1]-G[3-8/1]-N[3-6/1]
FXNCA4-[2-30/1]-F[3-50/1]-G[3-8/1]-N[4-8/1]
FXNCA4A-[2-30/1]-F[3-50/1]-G[3-8/1]-N[4-8/1]
FXNCA5-[2-30/1]-F[3-50/1]-G[3-8/1]-N[5-10/1]
FXNCA5A-[2-30/1]-F[3-50/1]-G[3-8/1]-N[5-10/1]
FXNCA6-[2-60/1]-F[5-100/1]-G[5-10/1]-N[6-12/1]
FXNCA6A-[2-60/1]-F[5-100/1]-G[5-10/1]-N[6-12/1]
FXNCA8-[2-60/1]-F[5-100/1]-G[5-10/1]-N[8-16/1]
FXNCA8A-[2-60/1]-F[5-100/1]-G[5-10/1]-N[8-16/1]
FXNCA10-[2-60/1]-F[5-100/1]-G[5-10/1]-N[10-20/1]
FXNCA10A-[2-60/1]-F[5-100/1]-G[5-10/1]-N[10-20/1]
FXNCA12-[2-60/1]-F[10-150/1]-G[5-15/1]-N[12-24/1]
FXNCA13-[2-60/1]-F[10-150/1]-G[5-15/1]-N[12-24/1]
FXNCA15-[2-60/1]-F[10-150/1]-G[5-15/1]-N[12-24/1]
FXNCA16-[2-60/1]-F[10-150/1]-G[5-15/1]-N[12-24/1]
FXNCA17-[2-60/1]-F[10-150/1]-G[5-20/1]-N[12-24/1]
FXNCA18-[2-60/1]-F[10-150/1]-G[5-20/1]-N[12-24/1]
FXNCA20-[4-75/1]-F[10-150/1]-G[5-20/1]-N[20-40/1]
FXNCA20A-[4-75/1]-F[10-150/1]-G[5-20/1]-N[20-40/1]
FXNCA22-[4-75/1]-F[10-150/1]-G[5-20/1]-N[20-40/1]
FXNCA22A-[4-75/1]-F[10-150/1]-G[5-20/1]-N[20-40/1]
FXNCA25-[4-75/1]-F[10-150/1]-G[5-20/1]-N[20-40/1]
FXNCA25A-[4-75/1]-F[10-150/1]-G[5-20/1]-N[20-40/1]
FXNCA30-[4-75/1]-F[10-150/1]-G[5-20/1]-N[20-40/1]
FXNCA30A-[4-75/1]-F[10-150/1]-G[5-20/1]-N[20-40/1]
HFXCA6-[2-60/1]-F[5-100/1]-G[5-10/1]
HFXCA6A-[2-60/1]-F[5-100/1]-G[5-10/1]
HFXCA8-[2-60/1]-F[5-100/1]-G[5-10/1]
HFXCA8A-[2-60/1]-F[5-100/1]-G[5-10/1]
HFXCA10-[2-60/1]-F[5-100/1]-G[5-10/1]
HFXCA10A-[2-60/1]-F[5-100/1]-G[5-10/1]
HFXCA12-[2-60/1]-F[10-150/1]-G[5-15/1]
HFXCA13-[2-60/1]-F[10-150/1]-G[5-15/1]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSShaft Diameter
(mm) 		Material Surface Treatment Hardness Material Thread Length Specifying Method M (Coarse) H Dimension
(mm) 		Thread Length N
(mm) 		F
(mm) 		G
(mm) 		Y
(mm)

-

1 4 Days 103SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Fixed Type374.53 ～ 503 ～ 82 ～ 30

-

1 4 Days 103SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Fixed Type31173 ～ 503 ～ 82 ～ 30

-

1 4 Days 104SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Fixed Type4863 ～ 503 ～ 82 ～ 30

-

1 4 Days 104SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Fixed Type41283 ～ 503 ～ 82 ～ 30

-

1 4 Days 105SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Fixed Type597.53 ～ 503 ～ 82 ～ 30

-

1 4 Days 105SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Fixed Type51393 ～ 503 ～ 82 ～ 30

-

1 4 Days 106SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Fixed Type61095 ～ 1005 ～ 102 ～ 60

-

1 4 Days 106SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Fixed Type614105 ～ 1005 ～ 102 ～ 60

-

1 4 Days 108SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Fixed Type812125 ～ 1005 ～ 102 ～ 60

-

1 4 Days 108SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Fixed Type816125 ～ 1005 ～ 102 ～ 60

-

1 4 Days 1010SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Fixed Type1015155 ～ 1005 ～ 102 ～ 60

-

1 4 Days 1010SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Fixed Type1020155 ～ 1005 ～ 102 ～ 60

-

1 4 Days 1012SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Fixed Type12171810 ～ 1505 ～ 152 ～ 60

-

1 4 Days 1013SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Fixed Type12181810 ～ 1505 ～ 152 ～ 60

-

1 4 Days 1015SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Fixed Type12201810 ～ 1505 ～ 152 ～ 60

-

1 4 Days 1016SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Fixed Type12211810 ～ 1505 ～ 152 ～ 60

-

1 4 Days 1017SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Fixed Type12231810 ～ 1505 ～ 202 ～ 60

-

1 4 Days 1018SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Fixed Type12231810 ～ 1505 ～ 202 ～ 60

-

1 4 Days 1020SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Fixed Type20263010 ～ 1505 ～ 204 ～ 75

-

1 4 Days 1020SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Fixed Type16262410 ～ 1505 ～ 204 ～ 75

-

1 4 Days 1022SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Fixed Type20283010 ～ 1505 ～ 204 ～ 75

-

1 4 Days 1022SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Fixed Type16282410 ～ 1505 ～ 204 ～ 75

-

1 4 Days 1025SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Fixed Type20313010 ～ 1505 ～ 204 ～ 75

-

1 4 Days 1025SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Fixed Type16312410 ～ 1505 ～ 204 ～ 75

-

1 4 Days 1030SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Fixed Type20363010 ～ 1505 ～ 204 ～ 75

-

1 4 Days 1030SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Fixed Type16362410 ～ 1505 ～ 204 ～ 75

-

1 4 Days 103SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Configurable Type373 ～ 63 ～ 503 ～ 82 ～ 30

-

1 4 Days 103SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Configurable Type31173 ～ 503 ～ 82 ～ 30

-

1 4 Days 104SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Configurable Type484 ～ 83 ～ 503 ～ 82 ～ 30

-

1 4 Days 104SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Configurable Type41283 ～ 503 ～ 82 ～ 30

-

1 4 Days 105SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Configurable Type595 ～ 103 ～ 503 ～ 82 ～ 30

-

1 4 Days 105SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Configurable Type51393 ～ 503 ～ 82 ～ 30

-

1 4 Days 106SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Configurable Type6106 ～ 125 ～ 1005 ～ 102 ～ 60

-

1 4 Days 106SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Configurable Type614105 ～ 1005 ～ 102 ～ 60

-

1 4 Days 108SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Configurable Type8128 ～ 165 ～ 1005 ～ 102 ～ 60

-

1 4 Days 108SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Configurable Type816125 ～ 1005 ～ 102 ～ 60

-

1 4 Days 1010SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Configurable Type101510 ～ 205 ～ 1005 ～ 102 ～ 60

-

1 4 Days 1010SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Configurable Type1020155 ～ 1005 ～ 102 ～ 60

-

1 4 Days 1012SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Configurable Type121712 ～ 2410 ～ 1505 ～ 152 ～ 60

-

1 4 Days 1013SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Configurable Type121812 ～ 2410 ～ 1505 ～ 152 ～ 60

-

1 4 Days 1015SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Configurable Type122012 ～ 2410 ～ 1505 ～ 152 ～ 60

-

1 4 Days 1016SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Configurable Type122112 ～ 2410 ～ 1505 ～ 152 ～ 60

-

1 4 Days 1017SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Configurable Type122312 ～ 2410 ～ 1505 ～ 202 ～ 60

-

1 4 Days 1018SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Configurable Type122312 ～ 2410 ～ 1505 ～ 202 ～ 60

-

1 4 Days 1020SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Configurable Type202620 ～ 4010 ～ 1505 ～ 204 ～ 75

-

1 4 Days 1020SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Configurable Type162620 ～ 4010 ～ 1505 ～ 204 ～ 75

-

1 4 Days 1022SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Configurable Type202820 ～ 4010 ～ 1505 ～ 204 ～ 75

-

1 4 Days 1022SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Configurable Type162820 ～ 4010 ～ 1505 ～ 204 ～ 75

-

1 4 Days 1025SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Configurable Type203120 ～ 4010 ～ 1505 ～ 204 ～ 75

-

1 4 Days 1025SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Configurable Type163120 ～ 4010 ～ 1505 ～ 204 ～ 75

-

1 4 Days 1030SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Configurable Type203620 ～ 4010 ～ 1505 ～ 204 ～ 75

-

1 4 Days 1030SteelBlack OxideHardness Not Spec-designedEN 1.1191 Equiv.Thread Length Configurable Type163620 ～ 4010 ～ 1505 ～ 204 ～ 75

-

1 10 Days 106SteelBlack OxideHardness Spec-designedEN 1.7220 Equiv.Thread Length Fixed Type61095 ～ 1005 ～ 102 ～ 60

-

1 10 Days 106SteelBlack OxideHardness Spec-designedEN 1.7220 Equiv.Thread Length Fixed Type614105 ～ 1005 ～ 102 ～ 60

-

1 10 Days 108SteelBlack OxideHardness Spec-designedEN 1.7220 Equiv.Thread Length Fixed Type812125 ～ 1005 ～ 102 ～ 60

-

1 10 Days 108SteelBlack OxideHardness Spec-designedEN 1.7220 Equiv.Thread Length Fixed Type816125 ～ 1005 ～ 102 ～ 60

-

1 10 Days 1010SteelBlack OxideHardness Spec-designedEN 1.7220 Equiv.Thread Length Fixed Type1015155 ～ 1005 ～ 102 ～ 60

-

1 10 Days 1010SteelBlack OxideHardness Spec-designedEN 1.7220 Equiv.Thread Length Fixed Type1020155 ～ 1005 ～ 102 ～ 60

-

1 7 Days 1012SteelBlack OxideHardness Spec-designedEN 1.7220 Equiv.Thread Length Fixed Type12171810 ～ 1505 ～ 152 ～ 60

-

1 7 Days 1013SteelBlack OxideHardness Spec-designedEN 1.7220 Equiv.Thread Length Fixed Type12181810 ～ 1505 ～ 152 ～ 60

Loading...

  1. 1
  2. 2
  3. 3
  4. Next >>

Back to the Category Cantilever Shafts/Cantilever Bolts

Technical Drawing - Cantilever Shafts

Cantilever Shafts/Pilot/Standard/Threaded/w Retaining Ring Groove:Related Image
Open the technical drawing in the new window

Available dimensions and tolerances can be found under the tab More information.
 

Specification Tables - Cantilever Shafts 

Part NumberDg61mm IncrementPg6M (Coarse)HWdmnUnit Price
Thread Length FixedThread Length Configurable
TypeNo.YFG  NRef. Dim.Tolerance
FXCAPFXCASFXCAHFXCAFXNCAPFXNCASFXNCA
Thread Length Fixed
FXCA
PFXCA
SFXCA
HFXCA
(D≥6)

Thread Length
Configurable
FXNCA
PFXNCA
SFXNCA		 3 3-0.002
-0.008		2~30 3~ 503~ 8 3~ 6 3M 3 7 5 2+ 0.060
 0		0.52   -   
 3A11 9   -   
 4 4-0.004
-0.012		 4~ 8 4M 4 8 6 30.7   -   
 4A1210   -   
 5 5 5~10 5M 5 9 7 4+ 0.075
 0		   -   
 5A1311   -   
 6 62~60 5~1005~10 6~12 6M 610 8 5       
 6A1412       
 8 8-0.005
-0.014		 8~16 8M 81210 7+ 0.090
 0		0.93       
 8A1614       
101010~2010M101513 9.6 0
- 0.090		1.15       
10A2017       
1212-0.006
-0.017		10~1505~1512~2412M12171411.5 0
- 0.110		4       
1313181512.4       
1515201714.3       
1616211815.2       
17175~20232016.2       
1818171.35       
2020-0.007
-0.020		4~7520~4020M20262419 0
- 0.210		5       
20A16M16       
222220M20282521       
22A16M16       
252520M20312723.9       
25A16M16       
303020M20363228.61.65       
30A16M16       
   HFXCA is applicable to D6 or larger specifications.    N is available for Thread Length Configurable Type only.

Alterations - Cantilever Shafts

Cantilever Shafts/Pilot/Standard/Threaded/w Retaining Ring Groove:Related Image
 

Basic information

Shaft Retaining Method Pilot Threaded Mounting Bearing Retaining Method With Retaining Ring Grooves Shoulder Shape Wrench Flats

Configure

Clear all

176Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Shaft Diameter(mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 13
    • 15
    • 16
    • 17
    • 18
    • 20
    • 22
    • 25
    • 30

    Clear

  • Material

    • Steel
    • Stainless Steel

    Clear

  • Surface Treatment

    • Not Provided
    • Black Oxide
    • Electroless Nickel Plating

    Clear

  • Hardness

    • Hardness Spec-designed
    • Hardness Not Spec-designed

    Clear

  • Material

    • EN 1.1191 Equiv.
    • EN 1.4301 Equiv.
    • EN 1.7220 Equiv.

    Clear

  • Thread Length Specifying Method

    • Thread Length Configurable Type
    • Thread Length Fixed Type

    Clear

  • M (Coarse)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20

    Clear

  • H Dimension(mm)

    • 7
    • 8
    • 9
    • 10
    • 11
    • 12
    • 13
    • 14
    • 15
    • 16
    • 17
    • 18
    • 20
    • 21
    • 23
    • 26
    • 28
    • 31
    • 36

    Clear

  • Thread Length N(mm)

    • 4.5
    • 6
    • 7
    • 7.5
    • 8
    • 9
    • 10
    • 12
    • 15
    • 18
    • 20
    • 24
    • 30

     [3-40/1mm Unit(s)]

    Clear

  • F(mm)

     [3-150/1mm Unit(s)]

    Clear

  • G(mm)

     [3-20/1mm Unit(s)]

    Clear

  • Y(mm)

     [2-75/1mm Unit(s)]

    Clear

  • Type

    • FXCA
    • FXNCA
    • HFXCA
    • PFXCA
    • PFXNCA
    • SFXCA
    • SFXNCA

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 3 Days or Less
    • 4 Days or Less
    • 7 Days or Less
    • 10 Days or Less

    Reset

Optional Attributes

Frequently Asked Questions (FAQ)

Question:

Do you have long axle bolts?
Answer:

We offer axle bolts in a configurable length of approx. 150 mm. If this length is not sufficient, a rotary axle may serve as an alternative depending on the design.
Question:

Do you have hollow axle bolts?
Answer:

Currently, we do not offer hollow axle bolts in our product line. However, MISUMI offers hollow rotary axles. These can be configured in a similar way and represent a possible alternative depending on the application.
Question:

What is the roundness of the axle bolts?
Answer:

Depending on the cantilever shaft, the roundness is up to 0.02 mm. It is recommended to refer to the values specified in the corresponding technical drawing and the specifications of the axle bolt.
Question:

How straight are axle bolts aligned?
Answer:

Our axle bolts are manufactured to a precise straightness of approx. 0.02 mm. The assembly side of the MISUMI axle bolts is finer to allow for a straight fit and exact alignment. Refer to technical drawing or specifications for details.
Question:

Are axle bolts with flange suitable for tension rollers?
Answer:

Flange cantilever shafts can also be used in idler pulley applications. If a cantilever shaft with collar can be used, an additional spacer sleeve can be omitted. The collar of the flange cantilever shaft is configurable and can be individually adjusted to the bearing position.
Question:

Do you have stainless axle bolts?
Answer:

MISUMI offers stainless steel cantilever shafts. In addition, our steel cantilever shafts are available with an optional surface treatment to protect them from corrosion and environmental conditions. Our cantilever shafts are available in both burnished and nickel-plated options.
Question:

Do you have axle bolts made of alloy quenched and tempered (Q & T) steel?
Answer:

In the MISUMI online shop, you will find a large number of cantilever shafts made of tempered steel. These can be additionally protected against corrosion with burnished or nickel-plated finishes.

Show more FAQ Close

Complementary Products

MISUMI Unit еxample related to this product

Search for оther еxamples

back next

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.