MISUMI Top
Automation Components
Rotary Power Transmission
Shaft Couplings
Shaft Couplings
Oldham couplings / fixing selectable / 1 disc: POM / body: aluminium

Configure

Allowable Torque Range(N•m)
- 20.01 to 50.00
- 50.01 to 100.00
Shaft Bore Dia. 1 d1 (or d)(mm)
- 14
- 15
- 16
- 18
- 20
- 22
- 25
- 26
- 28
- 30
- 35
- 38
Shaft Bore Dia. 2 d2 (or d)(mm)
- 14
- 15
- 16
- 18
- 20
- 22
- 25
- 26
- 28
- 30
- 35
- 38
O.D. D(mm)
- 44
- 55
- 70
Overall Length(mm)
- 46
- 57
- 77
Max. Rotational Speed Range(r/min)
- 4,001 to 10,000
- 10,001 to 78,000
Allowable Torque(Nm)
Calculation of the allowable torque (or the Safety Factor, etc.) differs depending on the manufacturer. For details, see the technical data provided by the relevant manufacturer.
- 26
- 30
- 40
- 45
- 72
- 80
Max. Rotational Speed(r/min)
- 8000
- 10000
- 12000
Allowable Lateral Misalignment Range(mm)
- 0.41 to 1.0
- 1.1 to 3.0
Allowable Lateral Misalignment(mm)
- 1
- 1.5
- 2
Shaft Bore Shape
Shaft Tightening Method
- Clamping
- Set Screws
Shaft I.D. d1 Change Hole Dia. [LDC] Specified in 0.1mm Increment
[14-38/0.1]
Shaft I.D. d2 Change Hole Dia. [RDC] Specified in 0.1mm Increment
[14-38/0.1]
Type
CAD
- 2D
- 3D
Est. shipping days
- All
- Within 7 working days

Oldham couplings / fixing selectable / 1 disc: POM / body: aluminium

CatalogP.1-1091

Part number:

Still undefined. 72 possible part numbers found.

Outline drawing and specifications table
Part number list
More Information
Catalog

Outline drawing and specifications table

Back to the Category Shaft Couplings

Technical Drawing - Claw Couplings

Couplings/Oldham/Large Shaft Diameter:Related Image

Open the technical drawing in the new window

Available dimensions and tolerances can be found under the tab More information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Claw Couplings

Operating Temperature: -20°C ~ 80°C
Tolerances for d1 and d2 are values before slit machining.
The lateral, angular, and axial misalignment values shown are for each occurring individually. When multiple misalignments are occurring simultaneously, the allowable maximum value of each will be reduced to 1/2. When multiple misalignments are occurring simultaneously, the allowable maximum value of each will be reduced to 1/2.
For the selection criteria and alignment procedures, see >> P.1061

Shape	Standard Bore	Keywayed Bore			Material		Accessory
Shape	Standard Bore	d₁ (One Side)	d₂ (One Side)	d₁, d₂ (Both Sides)	Hub	Spacer	Accessory
Set Screw	MFJ	-	-	MFJWK	Aluminum Alloy	Polyacetal	Set Screw
Clamping	MFJC	MFJCLK	MFJCRK	MFJCWK	Aluminum Alloy	Polyacetal	Hex Socket Head Cap Screw

Further specifications can be found under the tab More information.

Composition of a Product Code - Claw Couplings

Part Number	-	Shaft Bore Dia. d₁	-	Shaft Bore Dia. d₂
MFJ44	-	15	-	20
MFJCWK70	-	22	-	35

Alterations - Claw Couplings

General Information - Claw Couplings

Shaft coupling - compensation coupling - Oldham coupling - slit coupling - chain coupling - disc coupling - bellow coupling - product assortment

Shaft Coupling Selection Details

- Material: aluminum, aluminum alloy, steel, stainless steel, plastic

- Coupling buffer material: polyacetal, polyurethane, nylon, aluminum bronze, carbon fibre reinforced polymer (CFRP)

- Disc material: stainless steel, polyimide, carbon fibre (carbon)

- Fastening: hub clamping, half shell clamping, threaded pin clamping, clamping sleeve, keyway

- Design: slit coupling, disc coupling (servo coupling), Oldham coupling, dog coupling, jaw coupling, bellow coupling, metal bellow coupling, elastomer coupling

- ISO tolerances: H8

- Shaft diameter: 1 to 45 mm

- Outer diameter: 6 to 95 mm

- Length: 8.4 to 100 mm

- Offset: angle offset, radial offset, axial offset

Design Overview

Description/Basics

A shaft coupling, also called a compensating coupling, is generally used for the transmission of torque for mechanical engineering. Flexible shaft couplings (non-rigid) can compensate for lateral, axial and angular offsets (misalignment). Therefore, these are common connecting elements between motors and axles/shafts or even ball screws.

There are various types of designs, such as the jaw couplings, disc couplings (servo couplings), slit couplings, bellow couplings, Oldham couplings and many others, which are selected depending on the type of misalignment. You can determine which design is the right one for transmission in your application with the Coupling Selection Method available as a PDF.

When the shaft coupling is professionally installed, the transmission of rotational forces should be slip-free. To do this, the appropriate shaft coupling must be selected depending on the application. Here, it is important to observe the degree of misalignment, the maximum speed of rotation and the permissible torque of the compensation coupling and not to exceed these values during operation. If several misalignments occur at the same time, it is recommended to reduce the maximum value of the specified misalignment by approximately half.

The most commonly used elastomer coupling is the jaw coupling, which consists of a plastic buffer with damping properties. As a result, shocks and vibrations in a drive system can be damped, which protects adjacent components in the transmission of force. Our product range offers you alternative materials for the elastomers. These include among others aluminum bronze and carbon fibre-reinforced plastic.

The different shaft connections on the compensation couplings allow various connection variants for assembly. For this purpose, hub clamping, half shell clamping, slot clamping, threaded pin clamping, chip sleeve and keyways are available.
If a keyway is selected for a MISUMI shaft coupling, it is recommended obtaining the MISUMI machine key, as it is best to combine these.

A shaft coupling can be used for precise positioning. These are often combined together with slide screws or ball screws. A disc clutch (servo coupling) is suitable for this application, since it has a high torsional rigidity.

In addition to the standardized diameter of the shaft bore, MISUMI offers the option LDC and RDC, which allows the drill diameter to be adjusted to the shaft end in 0.1 mm increments.

Application Examples - Claw Couplings

Application example: shaft coupling - disc coupling with servo motor - disc coupling with ball screw drive - shaft clutch with servo motor - shaft clutch with ball screw drive

Shaft coupling with servo motor and ball screw
(1) Servo motor, (2) disc coupling (servo coupling), (3) ball screw

Application example: shaft coupling with encoder - shaft coupling with bearing housing - slit coupling with encoder - slit coupling with bearing housing -

Slit coupling with encoder
(1) Bearing with housing, (2) shaft coupling, (3) motor, (4) axles/shafts

Application example - Performance test stand with shaft coupling - Oldham coupling with engine - test stand with Oldham coupling

Engine test stand with Oldham coupling
(1) X-axis positioning stage, (2) performance test station, (3) shaft coupling, (4) brackets, L-shaped

Application example: synchronous pulley with shaft coupling - shaft coupling with motor and gearbox

Shaft coupling with motor and gearbox
(1) Motor, (2) Shaft coupling, (3) Conversion/Reducing gears, (4) Timing pulleys / Idlers

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Part number list

Number of items

Part number

MFJ44-[14,15,16,18,20,22]-[14,15,16,18,20,22]

MFJ44-[14,15,16,18,20,22]-RDC[14-22/0.1]

MFJ44-LDC[14-22/0.1]-[14,15,16,18,20,22]

MFJ44-LDC[14-22/0.1]-RDC[14-22/0.1]

MFJ55-[18,20,22,25,26]-[18,20,22,25,26]

MFJ55-[18,20,22,25,26]-RDC[18-26/0.1]

MFJ55-LDC[18-26/0.1]-[18,20,22,25,26]

MFJ55-LDC[18-26/0.1]-RDC[18-26/0.1]

MFJ70-[22,25,28,30,35,38]-[22,25,28,30,35,38]

MFJ70-[22,25,28,30,35,38]-RDC[22-38/0.1]

MFJ70-LDC[22-38/0.1]-[22,25,28,30,35,38]

MFJ70-LDC[22-38/0.1]-RDC[22-38/0.1]

MFJC44-[14,15,16,18,20]-[14,15,16,18,20]

MFJC44-[14,15,16,18,20]-RDC[14-20/0.1]

MFJC44-LDC[14-20/0.1]-[14,15,16,18,20]

MFJC44-LDC[14-20/0.1]-RDC[14-20/0.1]

MFJC55-[18,20,22,25]-[18,20,22,25]

MFJC55-[18,20,22,25]-RDC[18-25/0.1]

MFJC55-LDC[18-25/0.1]-[18,20,22,25]

MFJC55-LDC[18-25/0.1]-RDC[18-25/0.1]

MFJC70-[22,25,28,30,35]-[22,25,28,30,35]

MFJC70-[22,25,28,30,35]-RDC[22-35/0.1]

MFJC70-LDC[22-35/0.1]-[22,25,28,30,35]

MFJC70-LDC[22-35/0.1]-RDC[22-35/0.1]

MFJCLK44-[14,15,16,18,20]-[14,15,16,18,20]

MFJCLK44-[14,15,16,18,20]-RDC[14-20/0.1]

MFJCLK44-LDC[14-20/0.1]-[14,15,16,18,20]

MFJCLK44-LDC[14-20/0.1]-RDC[14-20/0.1]

MFJCLK55-[18,20,22,25]-[18,20,22,25]

MFJCLK55-[18,20,22,25]-RDC[18-25/0.1]

MFJCLK55-LDC[18-25/0.1]-[18,20,22,25]

MFJCLK55-LDC[18-25/0.1]-RDC[18-25/0.1]

MFJCLK70-[22,25,28,30,35]-[22,25,28,30,35]

MFJCLK70-[22,25,28,30,35]-RDC[22-35/0.1]

MFJCLK70-LDC[22-35/0.1]-[22,25,28,30,35]

MFJCLK70-LDC[22-35/0.1]-RDC[22-35/0.1]

MFJCRK44-[14,15,16,18,20]-[14,15,16,18,20]

MFJCRK44-[14,15,16,18,20]-RDC[14-20/0.1]

MFJCRK44-LDC[14-20/0.1]-[14,15,16,18,20]

MFJCRK44-LDC[14-20/0.1]-RDC[14-20/0.1]

MFJCRK55-[18,20,22,25]-[18,20,22,25]

MFJCRK55-[18,20,22,25]-RDC[18-25/0.1]

MFJCRK55-LDC[18-25/0.1]-[18,20,22,25]

MFJCRK55-LDC[18-25/0.1]-RDC[18-25/0.1]

MFJCRK70-[22,25,28,30,35]-[22,25,28,30,35]

MFJCRK70-[22,25,28,30,35]-RDC[22-35/0.1]

MFJCRK70-LDC[22-35/0.1]-[22,25,28,30,35]

MFJCRK70-LDC[22-35/0.1]-RDC[22-35/0.1]

MFJCWK44-[14,15,16,18,20]-[14,15,16,18,20]

MFJCWK44-[14,15,16,18,20]-RDC[14-20/0.1]

MFJCWK44-LDC[14-20/0.1]-[14,15,16,18,20]

MFJCWK44-LDC[14-20/0.1]-RDC[14-20/0.1]

MFJCWK55-[18,20,22,25]-[18,20,22,25]

MFJCWK55-[18,20,22,25]-RDC[18-25/0.1]

MFJCWK55-LDC[18-25/0.1]-[18,20,22,25]

MFJCWK55-LDC[18-25/0.1]-RDC[18-25/0.1]

MFJCWK70-[22,25,28,30,35]-[22,25,28,30,35]

MFJCWK70-[22,25,28,30,35]-RDC[22-35/0.1]

MFJCWK70-LDC[22-35/0.1]-[22,25,28,30,35]

MFJCWK70-LDC[22-35/0.1]-RDC[22-35/0.1]

Allowable Torque Range

(N•m)

Shaft Bore Dia. 1 d1 (or d)

(mm)

Shaft Bore Dia. 2 d2 (or d)

(mm)

O.D. D

(mm)

Overall Length

(mm)

Max. Rotational Speed Range

(r/min)

Allowable Torque

(Nm)

Max. Rotational Speed

(r/min)

Allowable Lateral Misalignment Range

(mm)

Allowable Lateral Misalignment

(mm)

Allowable Axial Misalignment

(mm)

Moment of Inertia

(kg･m²)

Shaft Bore Shape

Shaft Tightening Method

Shaft I.D. d1 Change Hole Dia. [LDC] Specified in 0.1mm Increment

Shaft I.D. d2 Change Hole Dia. [RDC] Specified in 0.1mm Increment

RoHS?

Minimum order quantity

20.01 to 50.00	14 ～ 22	14 ～ 22	44	46	10,001 to 78,000	30	12000	0.41 to 1.0	1	+0.5/-0.5	4 x10^-5	Standard Holes	Set Screws	-	-	10	1 pieces
20.01 to 50.00	14 ～ 22	-	44	46	10,001 to 78,000	30	12000	0.41 to 1.0	1	+0.5/-0.5	4 x10^-5	Standard Holes	Set Screws	-	14 ～ 22	10	1 pieces
20.01 to 50.00	-	14 ～ 22	44	46	10,001 to 78,000	30	12000	0.41 to 1.0	1	+0.5/-0.5	4 x10^-5	Standard Holes	Set Screws	14 ～ 22	-	10	1 pieces
20.01 to 50.00	-	-	44	46	10,001 to 78,000	30	12000	0.41 to 1.0	1	+0.5/-0.5	4 x10^-5	Standard Holes	Set Screws	14 ～ 22	14 ～ 22	10	1 pieces
20.01 to 50.00	18 ～ 26	18 ～ 26	55	57	4,001 to 10,000	45	10000	1.1 to 3.0	1.5	+0.6/-0.6	11x10^-5	Standard Holes	Set Screws	-	-	10	1 pieces
20.01 to 50.00	18 ～ 26	-	55	57	4,001 to 10,000	45	10000	1.1 to 3.0	1.5	+0.6/-0.6	11x10^-5	Standard Holes	Set Screws	-	18 ～ 26	10	1 pieces
20.01 to 50.00	-	18 ～ 26	55	57	4,001 to 10,000	45	10000	1.1 to 3.0	1.5	+0.6/-0.6	11x10^-5	Standard Holes	Set Screws	18 ～ 26	-	10	1 pieces
20.01 to 50.00	-	-	55	57	4,001 to 10,000	45	10000	1.1 to 3.0	1.5	+0.6/-0.6	11x10^-5	Standard Holes	Set Screws	18 ～ 26	18 ～ 26	10	1 pieces
50.01 to 100.00	22 ～ 38	22 ～ 38	70	77	4,001 to 10,000	80	8000	1.1 to 3.0	2	+0.8/-0.8	40x10^-5	Standard Holes	Set Screws	-	-	10	1 pieces
50.01 to 100.00	22 ～ 38	-	70	77	4,001 to 10,000	80	8000	1.1 to 3.0	2	+0.8/-0.8	40x10^-5	Standard Holes	Set Screws	-	22 ～ 38	10	1 pieces
50.01 to 100.00	-	22 ～ 38	70	77	4,001 to 10,000	80	8000	1.1 to 3.0	2	+0.8/-0.8	40x10^-5	Standard Holes	Set Screws	22 ～ 38	-	10	1 pieces
50.01 to 100.00	-	-	70	77	4,001 to 10,000	80	8000	1.1 to 3.0	2	+0.8/-0.8	40x10^-5	Standard Holes	Set Screws	22 ～ 38	22 ～ 38	10	1 pieces
20.01 to 50.00	14 ～ 20	14 ～ 20	44	46	10,001 to 78,000	26	12000	0.41 to 1.0	1	+0.5/-0.5	4 x10^-5	Standard Holes	Clamping	-	-	10	1 pieces
20.01 to 50.00	14 ～ 20	-	44	46	10,001 to 78,000	26	12000	0.41 to 1.0	1	+0.5/-0.5	4 x10^-5	Standard Holes	Clamping	-	14 ～ 20	10	1 pieces
20.01 to 50.00	-	14 ～ 20	44	46	10,001 to 78,000	26	12000	0.41 to 1.0	1	+0.5/-0.5	4 x10^-5	Standard Holes	Clamping	14 ～ 20	-	10	1 pieces
20.01 to 50.00	-	-	44	46	10,001 to 78,000	26	12000	0.41 to 1.0	1	+0.5/-0.5	4 x10^-5	Standard Holes	Clamping	14 ～ 20	14 ～ 20	10	1 pieces
20.01 to 50.00	18 ～ 25	18 ～ 25	55	57	4,001 to 10,000	40	10000	1.1 to 3.0	1.5	+0.6/-0.6	11x10^-5	Standard Holes	Clamping	-	-	10	1 pieces
20.01 to 50.00	18 ～ 25	-	55	57	4,001 to 10,000	40	10000	1.1 to 3.0	1.5	+0.6/-0.6	11x10^-5	Standard Holes	Clamping	-	18 ～ 25	10	1 pieces
20.01 to 50.00	-	18 ～ 25	55	57	4,001 to 10,000	40	10000	1.1 to 3.0	1.5	+0.6/-0.6	11x10^-5	Standard Holes	Clamping	18 ～ 25	-	10	1 pieces
20.01 to 50.00	-	-	55	57	4,001 to 10,000	40	10000	1.1 to 3.0	1.5	+0.6/-0.6	11x10^-5	Standard Holes	Clamping	18 ～ 25	18 ～ 25	10	1 pieces
50.01 to 100.00	22 ～ 35	22 ～ 35	70	77	4,001 to 10,000	72	8000	1.1 to 3.0	2	+0.8/-0.8	40x10^-5	Standard Holes	Clamping	-	-	10	1 pieces
50.01 to 100.00	22 ～ 35	-	70	77	4,001 to 10,000	72	8000	1.1 to 3.0	2	+0.8/-0.8	40x10^-5	Standard Holes	Clamping	-	22 ～ 35	10	1 pieces
50.01 to 100.00	-	22 ～ 35	70	77	4,001 to 10,000	72	8000	1.1 to 3.0	2	+0.8/-0.8	40x10^-5	Standard Holes	Clamping	22 ～ 35	-	10	1 pieces
50.01 to 100.00	-	-	70	77	4,001 to 10,000	72	8000	1.1 to 3.0	2	+0.8/-0.8	40x10^-5	Standard Holes	Clamping	22 ～ 35	22 ～ 35	10	1 pieces
20.01 to 50.00	14 ～ 20	14 ～ 20	44	46	10,001 to 78,000	26	12000	0.41 to 1.0	1	+0.5/-0.5	4 x10^-5	Hole with Keyway d1 Side	Clamping	-	-	10	1 pieces
20.01 to 50.00	14 ～ 20	-	44	46	10,001 to 78,000	26	12000	0.41 to 1.0	1	+0.5/-0.5	4 x10^-5	Hole with Keyway d1 Side	Clamping	-	14 ～ 20	10	1 pieces
20.01 to 50.00	-	14 ～ 20	44	46	10,001 to 78,000	26	12000	0.41 to 1.0	1	+0.5/-0.5	4 x10^-5	Hole with Keyway d1 Side	Clamping	14 ～ 20	-	10	1 pieces
20.01 to 50.00	-	-	44	46	10,001 to 78,000	26	12000	0.41 to 1.0	1	+0.5/-0.5	4 x10^-5	Hole with Keyway d1 Side	Clamping	14 ～ 20	14 ～ 20	10	1 pieces
20.01 to 50.00	18 ～ 25	18 ～ 25	55	57	4,001 to 10,000	40	10000	1.1 to 3.0	1.5	+0.6/-0.6	11x10^-5	Hole with Keyway d1 Side	Clamping	-	-	10	1 pieces
20.01 to 50.00	18 ～ 25	-	55	57	4,001 to 10,000	40	10000	1.1 to 3.0	1.5	+0.6/-0.6	11x10^-5	Hole with Keyway d1 Side	Clamping	-	18 ～ 25	10	1 pieces
20.01 to 50.00	-	18 ～ 25	55	57	4,001 to 10,000	40	10000	1.1 to 3.0	1.5	+0.6/-0.6	11x10^-5	Hole with Keyway d1 Side	Clamping	18 ～ 25	-	10	1 pieces
20.01 to 50.00	-	-	55	57	4,001 to 10,000	40	10000	1.1 to 3.0	1.5	+0.6/-0.6	11x10^-5	Hole with Keyway d1 Side	Clamping	18 ～ 25	18 ～ 25	10	1 pieces
50.01 to 100.00	22 ～ 35	22 ～ 35	70	77	4,001 to 10,000	72	8000	1.1 to 3.0	2	+0.8/-0.8	40x10^-5	Hole with Keyway d1 Side	Clamping	-	-	10	1 pieces
50.01 to 100.00	22 ～ 35	-	70	77	4,001 to 10,000	72	8000	1.1 to 3.0	2	+0.8/-0.8	40x10^-5	Hole with Keyway d1 Side	Clamping	-	22 ～ 35	10	1 pieces
50.01 to 100.00	-	22 ～ 35	70	77	4,001 to 10,000	72	8000	1.1 to 3.0	2	+0.8/-0.8	40x10^-5	Hole with Keyway d1 Side	Clamping	22 ～ 35	-	10	1 pieces
50.01 to 100.00	-	-	70	77	4,001 to 10,000	72	8000	1.1 to 3.0	2	+0.8/-0.8	40x10^-5	Hole with Keyway d1 Side	Clamping	22 ～ 35	22 ～ 35	10	1 pieces
20.01 to 50.00	14 ～ 20	14 ～ 20	44	46	10,001 to 78,000	26	12000	0.41 to 1.0	1	+0.5/-0.5	4 x10^-5	Hole with Keyway d2 Side	Clamping	-	-	10	1 pieces
20.01 to 50.00	14 ～ 20	-	44	46	10,001 to 78,000	26	12000	0.41 to 1.0	1	+0.5/-0.5	4 x10^-5	Hole with Keyway d2 Side	Clamping	-	14 ～ 20	10	1 pieces
20.01 to 50.00	-	14 ～ 20	44	46	10,001 to 78,000	26	12000	0.41 to 1.0	1	+0.5/-0.5	4 x10^-5	Hole with Keyway d2 Side	Clamping	14 ～ 20	-	10	1 pieces
20.01 to 50.00	-	-	44	46	10,001 to 78,000	26	12000	0.41 to 1.0	1	+0.5/-0.5	4 x10^-5	Hole with Keyway d2 Side	Clamping	14 ～ 20	14 ～ 20	10	1 pieces
20.01 to 50.00	18 ～ 25	18 ～ 25	55	57	4,001 to 10,000	40	10000	1.1 to 3.0	1.5	+0.6/-0.6	11x10^-5	Hole with Keyway d2 Side	Clamping	-	-	10	1 pieces
20.01 to 50.00	18 ～ 25	-	55	57	4,001 to 10,000	40	10000	1.1 to 3.0	1.5	+0.6/-0.6	11x10^-5	Hole with Keyway d2 Side	Clamping	-	18 ～ 25	10	1 pieces
20.01 to 50.00	-	18 ～ 25	55	57	4,001 to 10,000	40	10000	1.1 to 3.0	1.5	+0.6/-0.6	11x10^-5	Hole with Keyway d2 Side	Clamping	18 ～ 25	-	10	1 pieces
20.01 to 50.00	-	-	55	57	4,001 to 10,000	40	10000	1.1 to 3.0	1.5	+0.6/-0.6	11x10^-5	Hole with Keyway d2 Side	Clamping	18 ～ 25	18 ～ 25	10	1 pieces
50.01 to 100.00	22 ～ 35	22 ～ 35	70	77	4,001 to 10,000	72	8000	1.1 to 3.0	2	+0.8/-0.8	40x10^-5	Hole with Keyway d2 Side	Clamping	-	-	10	1 pieces
50.01 to 100.00	22 ～ 35	-	70	77	4,001 to 10,000	72	8000	1.1 to 3.0	2	+0.8/-0.8	40x10^-5	Hole with Keyway d2 Side	Clamping	-	22 ～ 35	10	1 pieces
50.01 to 100.00	-	22 ～ 35	70	77	4,001 to 10,000	72	8000	1.1 to 3.0	2	+0.8/-0.8	40x10^-5	Hole with Keyway d2 Side	Clamping	22 ～ 35	-	10	1 pieces
50.01 to 100.00	-	-	70	77	4,001 to 10,000	72	8000	1.1 to 3.0	2	+0.8/-0.8	40x10^-5	Hole with Keyway d2 Side	Clamping	22 ～ 35	22 ～ 35	10	1 pieces
20.01 to 50.00	14 ～ 20	14 ～ 20	44	46	10,001 to 78,000	26	12000	0.41 to 1.0	1	+0.5/-0.5	4 x10^-5	Hole with Keyway d1/d2 Side	Clamping	-	-	10	1 pieces
20.01 to 50.00	14 ～ 20	-	44	46	10,001 to 78,000	26	12000	0.41 to 1.0	1	+0.5/-0.5	4 x10^-5	Hole with Keyway d1/d2 Side	Clamping	-	14 ～ 20	10	1 pieces
20.01 to 50.00	-	14 ～ 20	44	46	10,001 to 78,000	26	12000	0.41 to 1.0	1	+0.5/-0.5	4 x10^-5	Hole with Keyway d1/d2 Side	Clamping	14 ～ 20	-	10	1 pieces
20.01 to 50.00	-	-	44	46	10,001 to 78,000	26	12000	0.41 to 1.0	1	+0.5/-0.5	4 x10^-5	Hole with Keyway d1/d2 Side	Clamping	14 ～ 20	14 ～ 20	10	1 pieces
20.01 to 50.00	18 ～ 25	18 ～ 25	55	57	4,001 to 10,000	40	10000	1.1 to 3.0	1.5	+0.6/-0.6	11x10^-5	Hole with Keyway d1/d2 Side	Clamping	-	-	10	1 pieces
20.01 to 50.00	18 ～ 25	-	55	57	4,001 to 10,000	40	10000	1.1 to 3.0	1.5	+0.6/-0.6	11x10^-5	Hole with Keyway d1/d2 Side	Clamping	-	18 ～ 25	10	1 pieces
20.01 to 50.00	-	18 ～ 25	55	57	4,001 to 10,000	40	10000	1.1 to 3.0	1.5	+0.6/-0.6	11x10^-5	Hole with Keyway d1/d2 Side	Clamping	18 ～ 25	-	10	1 pieces
20.01 to 50.00	-	-	55	57	4,001 to 10,000	40	10000	1.1 to 3.0	1.5	+0.6/-0.6	11x10^-5	Hole with Keyway d1/d2 Side	Clamping	18 ～ 25	18 ～ 25	10	1 pieces
50.01 to 100.00	22 ～ 35	22 ～ 35	70	77	4,001 to 10,000	72	8000	1.1 to 3.0	2	+0.8/-0.8	40x10^-5	Hole with Keyway d1/d2 Side	Clamping	-	-	10	1 pieces
50.01 to 100.00	22 ～ 35	-	70	77	4,001 to 10,000	72	8000	1.1 to 3.0	2	+0.8/-0.8	40x10^-5	Hole with Keyway d1/d2 Side	Clamping	-	22 ～ 35	10	1 pieces
50.01 to 100.00	-	22 ～ 35	70	77	4,001 to 10,000	72	8000	1.1 to 3.0	2	+0.8/-0.8	40x10^-5	Hole with Keyway d1/d2 Side	Clamping	22 ～ 35	-	10	1 pieces
50.01 to 100.00	-	-	70	77	4,001 to 10,000	72	8000	1.1 to 3.0	2	+0.8/-0.8	40x10^-5	Hole with Keyway d1/d2 Side	Clamping	22 ～ 35	22 ～ 35	10	1 pieces

Unit price (excluding VAT)(Unit price including VAT)	Standard shipping days

- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days
- ( - )	7 working days

Basic information
Outline and specifications

Basic information

Technical information

Outline and specifications

Back to the Category Shaft Couplings

Technical Drawing - Claw Couplings

Open the technical drawing in the new window

Specification Tables - Claw Couplings

■Set Screw

Part Number		d₁, d₂ Selection (d₁≤d₂)												d₃	L	ℓ	F	Set Screw		Unit Price
Type	D	d₁, d₂ Selection (d₁≤d₂)												d₃	L	ℓ	F	M	Tightening Torque (N • m)	MFJ	MFJWK
MFJ MFJWK	44	14	15	16	18	20	22							22.5	46	15	7.5	M 6	7.0
	55				18	20	22	25	26					28	57	19	9.5	M 8	15.0
	70						22	25		28	30	35	38	39	77	25	12.5	M10	30.0

■Clamping

Part Number		d₁, d₂ Selection (d₁≤d₂)										d₃	L	ℓ	F	A	Clamp Screw		Unit Price
Type	D	d₁, d₂ Selection (d₁≤d₂)										d₃	L	ℓ	F	A	M	Tightening Torque (N • m)	MFJC	MFJCLK MFJCRK	MFJCWK
MFJC MFJCLK MFJCRK MFJCWK	44	14	15	16	18	20						22.5	46	15	7.5	14.5	M5	*8.4
	55				18	20	22	25				28	57	19	9.5	17	M6	*14.4
	70						22	25	28	30	35	39	77	25	12.5	24	M8	*30.0

* When the shaft diameter is small, clamp screw tightening torque should be higher than the prescribed value to prevent shaft slipping. The above tightening torque is for reference.

Part Number			Allowable Torque (N • m)		Angular Misalignment (°)	Lateral Misalignment (mm)	Static Torsional Spring Constant (N • m/rad)	Max. Rotational Speed (r/min)	Moment of Inertia (kg • m²)	Allowable Axial Misalignment (mm)	Mass (g)
Type		D	Set Screw	Clamping
Set Screw MFJ MFJWK	Clamping MFJC MFJCLK MFJCRK MFJCWK	44	30	26	2	1	1500	12000	4 x10^-5	±0.5	140
		55	45	40		1.5	2800	10000	11 x10^-5	±0.6	260
		70	80	72		2	4800	8000	40 x10^-5	±0.8	450

The allowable torque varies depending on temperature P.1062

Alterations - Claw Couplings

Catalog

Products homepage

Catalog (2-page spread)

Oldham couplings / fixing selectable / 1 disc: POM / body: aluminium

Outline drawing and specifications table

Technical Drawing - Claw Couplings

Basic Properties (e.g., material, hardness, coating, tolerance) - Claw Couplings

Composition of a Product Code - Claw Couplings

Alterations - Claw Couplings

General Information - Claw Couplings

Shaft Coupling Selection Details

Description/Basics

Application Examples - Claw Couplings

Industrial Applications

Part number list

More Information

Basic information

Outline and specifications

Technical Drawing - Claw Couplings

Specification Tables - Claw Couplings

Alterations - Claw Couplings

Catalog