Parallel Tapped / Standard Pitch

Type				Material	Surface Treatment	Accessory
Pitch Selectable		Pitch Configurable
Standard	Thin	Standard	Thin
KQM	KQMU	KQL	KQLU	EN 1.0038 Equiv.	Black Oxide	Hex Socket Head Cap Screw
MQM	MQMU	MQL	MQLU		Electroless Nickel Plating	Hex Socket Head Cap Screw (Stainless Steel)
AQM	AQMU	AQL	-	EN AW-6063 Equiv.	Black Anodize	Hex Socket Head Cap Screw
WQM	WQMU	-	-		Clear Anodize	Hex Socket Head Cap Screw (Stainless Steel)
SQM	SQMU	SQL	SQLU	EN 1.4301 Equiv.	-

CB screws are included with the black oxide and black anodized products, and SCB screws are included with the other products.
■Included Screw

D	Included Screw (Thin Type has 1 screw on each side.)
8	M5-12, 1 pc.
10	M5-15, 1 pc.
12	M5-15, 1 pc.
15	M5-20, 2 pcs.
16	M5-20, 2 pcs.
20	M6-25, 2 pcs.
25	M6-30, 2 pcs.
30	M8-35, 2 pcs.
35	M8-40, 2 pcs.
40	M8-45, 2 pcs.
50	M10-55, 2 pcs.

■Pitch Selectable

Part Number				P	A	B	C	C1	E	H	S1	M1	S	W	M	d
Type		DH7
Standard KQM MQM AQM WQM SQM (D≤30)	Thin KQMU MQMU AQMU WQMU SQMU (D≤30)	8	+0.015 0	15	29	12	12	-	14	8	6	M3	-	2	M5	5.5
		10		16	31	16	16	9	15	9	8	M4	-
		12	+0.018 0	18	34				16	10			-
		15		25	45	22	22	12	20	12	12	M5	12
		16						-
		20	+0.021 0	30	52	28	28	16	22	15	16	M6	14		M6	6.6
		25		33	58	32	32	19	25	18	20		16
		30		37	66	40	40		29	21	25	M8	20		M8	9
		35	+0.025 0	40	72	45	45	22	32	24	28
KQM	KQMU	40	+0.025 0	45	79	50	50	25	34	26	30	M8	20	2	M8	9
		50		60	103	65	65	32	43	33	38	M10	32	3	M10	11
For the available sizes, refer to the price list. D=16 is only applicable to Standard Pitch (except Clear Anodize). DH7 tolerance is before the slit machining. For mating, g6, f8 shaft tolerances are recommended. Tightening with a long wrench is recommended.

■Pitch Configurable

Part Number				P Selection								A	B	C	C1	E	H	S1	M1	S	W	M	d
Type		DH7
Standard KQL MQL AQL SQL (D≤30)	Thin KQLU MQLU SQLU(D≤20)	10	+0.015 0	20		30						A=P+E	16	16	9	15	9	8	M4	-	2	M5	5.5
		12	+0.018 0		25		35									16	10			-
		15				30		40					22	22	12	20	12	12	M5	12
		20	+0.021 0		25			40					28	28	16	22	15	16	M6	14		M6	6.6
		25						40	50				32	32	19	25	18	20		16
		30							50	60			40	40		29	21	25	M8	20		M8	9
		35	+0.025 0										45	45	22	32	24	28
KQL KQLU		40	+0.025 0						50	60		A=P+E	50	50	25	34	26	30	M8	20	2	M8	9
		50							50		70		65	65	32	43	33	38	M10	32	3	M10	11
For the available sizes, refer to the price list. DH7 tolerance is before the slit machining. For mating, g6, f8 shaft tolerances are recommended. Tightening with a long wrench is recommended.