• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Plastic sleeves / with flange / POM / MC nylon / Bakelite / PEEK / GFK

Plastic sleeves / with flange / POM / MC nylon / Bakelite / PEEK / GFK
View the FAQ (4)

MISUMI

MISUMI

Shoulder type resin collars.

(i)Remark

  • Please check the content on our website as the PDF does not contain the most up-to-date information.

Data sheet

Unit еxample related to this product
Long stroke slide mechanism
Search for оther еxamples

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Back to the Category Plastic Washers/Plastic Sleeves

Technical Drawing - Plastic Washers

Resin Collars/Flanged/POM/MC Nylon/Bakelite/PEEK/Epoxy Glass:Related Image
Dimension Selectable: When (D+4) ≥ 30 for CLJHB, CLJHN and CLJHE, the (D+4) part tolerance will be 0/-0.3.
Dimension Configurable: When H ≥ 30 for FCLJHB, FCLJHN and FCLJHE, the H dimension tolerance will be 0/-0.3.
Open the technical drawing in the new window

Available dimensions and tolerances can be found under the tab More information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Plastic Washers

TypeMaterialColor
Pkg.Dimension SelectableDimension Configurable
PACK-WSJJWSJJFWSJJPolyacetalWhite
-WSJKFWSJKBlack
PACK-WSJMWSJMFWSJMMC Nylon
Standard Grade		Blue
-WSJWFWSJWIvory
-WSJDFWSJDMC Nylon
Conductive Grade		CDR2Black
-WSJTFWSJTCDR6
-WSJBFWSJBBakelitePaper BaseNatural Color
-WSJNFWSJNCloth BaseNatural Color
-WSJFFWSJFFluororesinWhite
-WSJPFWSJPPEEKGray
-WSJEFWSJEEpoxy GlassGreen

Material Properties >> P.141
When D ≥ 30 for WSJB, FWSJB, WSJN, FWSJN, WSJE and FWSJE, the D dimension tolerance will be 0/-0.3.

Further specifications can be found under the tab More information.

Composition of a Product Code - Plastic Washers

Part Number-D-L
CLJHM10-16-20.0
Part Number-V-D-H-T-L
FCLJHM-V15-D21-H26-T6-L50.5

Alterations - Plastic Washers

Resin Collars/Flanged/POM/MC Nylon/Bakelite/PEEK/Epoxy Glass:Related Image

General Information - Plastic Washers

 

Selection details of plastic washers/plastic sleeves

- Material: MC-nylon, polyacetal (POM), Bakelit, epoxy glass, polyether ether ketone (PEEK), fluoroplastic, polyslider, ceramic, polycarbonate (PC), polyamide (PA), polytetrafluoroethylene (PTFE), Duracon, Duranex, ABS, glass (lime-sodium glass)

- Outer diameter: 2 to 100 mm

- Inner diameter: 1 to 90 mm

- Thickness, length: 0.1 to 500 mm

- Forms: cylindrical, with collar, with pins, with countersunk bore, with guide, square washers

 

Description/Basics of plastic washers/plastic sleeves

Sleeves in general, are among the most commonly used machine elements to create a distance between two components. Plastic sleeves and ceramic sleeves offer added value compared to conventional metal collars.

Plastic sleeves and plastic sleeves with a collar have some advantages over their metallic counterparts. In addition to creating and maintaining a distance, they also have an insulating effect. The insulation effect refers to thermal insulation or electrical insulation depending on the material. In addition, their similarity to natural materials is greater than with metal sleeves. As a result, plastic washers and plastic sleeves (depending on the material) expand to the same extent under the influence of heat, such as wood or similar soft materials.

Plastic washers, as well as washers, enable an increase in surface compression. However, their resistance to pressure loads is lower depending on the material selected than that of a similarly large metal washer. For this purpose, the advantage of thermal and electrical insulation effects exists in plastic washers.

MISUMI also offers plastic washers and plastic sleeves with gliding properties. For example, washers and sleeves made of fluoroplastics are suitable for reducing friction resistances in hinge constructions. It should be noted that plastic sleeves do not replace plain bearings.

Polyether ether ketone (PEEK) has excellent thermal insulating properties. Depending on the strength and material composition, PEEK has a melting point of up to 300°C. It is therefore suitable, among other things, for insulating heating and cooling lines, for example. Due to the quality of the surface, the material has particularly good adhesive properties.

Polyacetal, also called POM, is characterized by its very good machinability and excellent mechanical properties. Polyacetal (POM) products are widely used in various branches of mechanical engineering.

At MISUMI you will find washers and sleeves made of various variants of MC Nylon. In addition to the standard version, a conductive and antistatic type is also offered. Thus, MC Nylon can be used in a wide variety of applications.

The different versions and shapes of the plastic washers and plastic sleeves allow utilising them in a wide variety of applications. Thus, plastic washers can be used, for example, as bearing mountings up to the assembly of printed circuit boards.

 

Application Examples

Plastic sleeve as thermally insulating spacer sleeve
(1) Plastic sleeves, (2) Cylindrical plastic sleeve, (3) Plastic washer, (4) Hexagon socket screws, (5) Washer, (6) Hexagon nut

Plastic sleeve as bearing ring
(1) Plastic sleeve with guide, (2) Rotary shaft, (3) Timing pulley, (4) Ball bearing (5) Bearing with housing, (6) Drive wheel

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
Part Number
CLJHB2-[4,​5,​6,​8,​10]-[10-30/0.5]
CLJHB3-[5,​6,​8,​10,​12]-[10-50/0.5]
CLJHB4-[6,​8,​10,​11,​12,​13,​14,​15,​16,​20,​25]-[10-50/0.5]
CLJHB5-[8,​10,​11,​12,​13,​14,​15,​16,​20,​25]-[10-50/0.5]
CLJHB6-[8,​10,​11,​12,​13,​14,​15,​16,​20,​25]-[10-50/0.5]
CLJHB8-[10,​11,​12,​13,​14,​15,​16,​20,​25,​30]-[10-100/0.5]
CLJHB10-[12,​13,​14,​15,​16,​20,​25,​30,​35,​40,​50]-[10-100/0.5]
CLJHB12-[15,​16,​20,​25,​30,​35,​40,​50]-[10-100/0.5]
CLJHB15-[20,​25,​30,​35,​40,​50,​60]-[10-100/0.5]
CLJHB16-[20,​25,​30,​35,​40,​50,​60]-[10-100/0.5]
CLJHB20-[25,​30,​35,​40,​50,​60]-[10-100/0.5]
CLJHB25-[30,​35,​40,​50,​60]-[10-100/0.5]
CLJHB30-[40,​50,​60]-[10-100/0.5]
CLJHD2-[4,​5,​6,​8,​10]-[10-30/0.5]
CLJHD3-[5,​6,​8,​10,​12]-[10-50/0.5]
CLJHD4-[6,​8,​10,​11,​12,​13,​14,​15,​16,​20,​25]-[10-50/0.5]
CLJHD5-[8,​10,​11,​12,​13,​14,​15,​16,​20,​25]-[10-50/0.5]
CLJHD6-[8,​10,​11,​12,​13,​14,​15,​16,​20,​25]-[10-50/0.5]
CLJHD8-[10,​11,​12,​13,​14,​15,​16,​20,​25,​30]-[10-100/0.5]
CLJHD10-[12,​13,​14,​15,​16,​20,​25,​30,​35,​40,​50]-[10-100/0.5]
CLJHD12-[15,​16,​20,​25,​30,​35,​40,​50]-[10-100/0.5]
CLJHD15-[20,​25,​30,​35,​40,​50,​60]-[10-100/0.5]
CLJHD16-[20,​25,​30,​35,​40,​50,​60]-[10-100/0.5]
CLJHD20-[25,​30,​35,​40,​50,​60]-[10-100/0.5]
CLJHD25-[30,​35,​40,​50,​60]-[10-100/0.5]
CLJHD30-[40,​50,​60]-[10-100/0.5]
CLJHE2-[4,​5,​6,​8,​10]-[10-30/0.5]
CLJHE3-[5,​6,​8,​10]-[10-30/0.5]
CLJHE4-[6,​8,​10,​11,​12,​13,​14,​15,​16,​20,​25]-[10-50/0.5]
CLJHE5-[8,​10,​11,​12,​13,​14,​15,​16,​20,​25]-[10-50/0.5]
CLJHE6-[8,​10,​11,​12,​13,​14,​15,​16,​20,​25]-[10-50/0.5]
CLJHE8-[10,​11,​12,​13,​14,​15,​16,​20,​25,​30]-[10-100/0.5]
CLJHE10-[12,​13,​14,​15,​16,​20,​25,​30,​35,​40,​50]-[10-100/0.5]
CLJHE12-[15,​16,​20,​25,​30,​35,​40,​50]-[10-100/0.5]
CLJHE15-[20,​25,​30,​35,​40,​50,​60]-[10-100/0.5]
CLJHE16-[20,​25,​30,​35,​40,​50,​60]-[10-100/0.5]
CLJHE20-[25,​30,​35,​40,​50,​60]-[10-100/0.5]
CLJHE25-[30,​35,​40,​50,​60]-[10-100/0.5]
CLJHE30-[40,​50,​60]-[10-100/0.5]
CLJHF2-[4,​5,​6,​8,​10]-[10-30/0.5]
CLJHF3-[5,​6,​8,​10]-[10-30/0.5]
CLJHF4-[6,​8,​10,​11,​12,​13,​14,​15,​16,​20,​25]-[10-50/0.5]
CLJHF5-[8,​10,​11,​12,​13,​14,​15,​16,​20,​25]-[10-50/0.5]
CLJHF6-[8,​10,​11,​12,​13,​14,​15,​16,​20,​25]-[10-50/0.5]
CLJHF8-[10,​11,​12,​13,​14,​15,​16,​20,​25,​30]-[10-100/0.5]
CLJHF10-[12,​13,​14,​15,​16,​20,​25,​30,​35,​40,​50]-[10-100/0.5]
CLJHF12-[15,​16,​20,​25,​30,​35,​40,​50]-[10-100/0.5]
CLJHF15-[20,​25,​30,​35,​40,​50,​60]-[10-100/0.5]
CLJHF16-[20,​25,​30,​35,​40,​50,​60]-[10-100/0.5]
CLJHF20-[25,​30,​35,​40,​50,​60]-[10-100/0.5]
CLJHF25-[30,​35,​40,​50,​60]-[10-100/0.5]
CLJHF30-[40,​50,​60]-[10-100/0.5]
CLJHJ2-[4,​5,​6,​8,​10]-[10-30/0.5]
CLJHJ3-[5,​6,​8,​10,​12]-[10-50/0.5]
CLJHJ4-[6,​8,​10,​11,​12,​13,​14,​15,​16,​20,​25]-[10-50/0.5]
CLJHJ5-[8,​10,​11,​12,​13,​14,​15,​16,​20,​25]-[10-50/0.5]
CLJHJ6-[8,​10,​11,​12,​13,​14,​15,​16,​20,​25]-[10-50/0.5]
CLJHJ8-[10,​11,​12,​13,​14,​15,​16,​20,​25,​30]-[10-100/0.5]
CLJHJ10-[12,​13,​14,​15,​16,​20,​25,​30,​35,​40,​50]-[10-100/0.5]
CLJHJ12-[15,​16,​20,​25,​30,​35,​40,​50]-[10-100/0.5]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSOuter Diameter
(mm) 		Internal Diameter
(mm) 		Thickness and length Material Material Detail Dimension Selecting Method Flange Dia. H
(Ø) 		Flange Thickness T
(mm) 		Tapping Coarse Thread Dia. Selection [VM] Tapping Fine Thread Dia. Selection [VMA]

-

1 6 Days 104 ～ 10210 ～ 30BakeliteBakelite (Paper Type)Dimension Selectable-5--

-

1 6 Days 105 ～ 12310 ～ 50BakeliteBakelite (Paper Type)Dimension Selectable-5--

-

1 6 Days 106 ～ 25410 ～ 50BakeliteBakelite (Paper Type)Dimension Selectable-5--

-

1 6 Days 108 ～ 25510 ～ 50BakeliteBakelite (Paper Type)Dimension Selectable-5--

-

1 6 Days 108 ～ 25610 ～ 50BakeliteBakelite (Paper Type)Dimension Selectable-5--

-

1 6 Days 1010 ～ 30810 ～ 100BakeliteBakelite (Paper Type)Dimension Selectable-5--

-

1 6 Days 1012 ～ 501010 ～ 100BakeliteBakelite (Paper Type)Dimension Selectable-5--

-

1 6 Days 1015 ～ 501210 ～ 100BakeliteBakelite (Paper Type)Dimension Selectable-5--

-

1 6 Days 1020 ～ 601510 ～ 100BakeliteBakelite (Paper Type)Dimension Selectable-5--

-

1 6 Days 1020 ～ 601610 ～ 100BakeliteBakelite (Paper Type)Dimension Selectable-5--

-

1 6 Days 1025 ～ 602010 ～ 100BakeliteBakelite (Paper Type)Dimension Selectable-5--

-

1 6 Days 1030 ～ 602510 ～ 100BakeliteBakelite (Paper Type)Dimension Selectable-5--

-

1 6 Days 1040 ～ 603010 ～ 100BakeliteBakelite (Paper Type)Dimension Selectable-5--

-

1 6 Days 104 ～ 10210 ～ 30MC NylonMC Nylon (EN MC501 CD R2 Equiv.)Dimension Selectable-5--

-

1 6 Days 105 ～ 12310 ～ 50MC NylonMC Nylon (EN MC501 CD R2 Equiv.)Dimension Selectable-5--

-

1 6 Days 106 ～ 25410 ～ 50MC NylonMC Nylon (EN MC501 CD R2 Equiv.)Dimension Selectable-5--

-

1 6 Days 108 ～ 25510 ～ 50MC NylonMC Nylon (EN MC501 CD R2 Equiv.)Dimension Selectable-5--

-

1 6 Days 108 ～ 25610 ～ 50MC NylonMC Nylon (EN MC501 CD R2 Equiv.)Dimension Selectable-5--

-

1 6 Days 1010 ～ 30810 ～ 100MC NylonMC Nylon (EN MC501 CD R2 Equiv.)Dimension Selectable-5--

-

1 6 Days 1012 ～ 501010 ～ 100MC NylonMC Nylon (EN MC501 CD R2 Equiv.)Dimension Selectable-5--

-

1 6 Days 1015 ～ 501210 ～ 100MC NylonMC Nylon (EN MC501 CD R2 Equiv.)Dimension Selectable-5--

-

1 6 Days 1020 ～ 601510 ～ 100MC NylonMC Nylon (EN MC501 CD R2 Equiv.)Dimension Selectable-5--

-

1 6 Days 1020 ～ 601610 ～ 100MC NylonMC Nylon (EN MC501 CD R2 Equiv.)Dimension Selectable-5--

-

1 6 Days 1025 ～ 602010 ～ 100MC NylonMC Nylon (EN MC501 CD R2 Equiv.)Dimension Selectable-5--

-

1 6 Days 1030 ～ 602510 ～ 100MC NylonMC Nylon (EN MC501 CD R2 Equiv.)Dimension Selectable-5--

-

1 6 Days 1040 ～ 603010 ～ 100MC NylonMC Nylon (EN MC501 CD R2 Equiv.)Dimension Selectable-5--

-

1 6 Days 104 ～ 10210 ～ 30Epoxy GlassEpoxy GlassDimension Selectable-5--

-

1 6 Days 105 ～ 10310 ～ 30Epoxy GlassEpoxy GlassDimension Selectable-5--

-

1 6 Days 106 ～ 25410 ～ 50Epoxy GlassEpoxy GlassDimension Selectable-5--

-

1 6 Days 108 ～ 25510 ～ 50Epoxy GlassEpoxy GlassDimension Selectable-5--

-

1 6 Days 108 ～ 25610 ～ 50Epoxy GlassEpoxy GlassDimension Selectable-5--

-

1 6 Days 1010 ～ 30810 ～ 100Epoxy GlassEpoxy GlassDimension Selectable-5--

-

1 6 Days 1012 ～ 501010 ～ 100Epoxy GlassEpoxy GlassDimension Selectable-5--

-

1 6 Days 1015 ～ 501210 ～ 100Epoxy GlassEpoxy GlassDimension Selectable-5--

-

1 6 Days 1020 ～ 601510 ～ 100Epoxy GlassEpoxy GlassDimension Selectable-5--

-

1 6 Days 1020 ～ 601610 ～ 100Epoxy GlassEpoxy GlassDimension Selectable-5--

-

1 6 Days 1025 ～ 602010 ～ 100Epoxy GlassEpoxy GlassDimension Selectable-5--

-

1 6 Days 1030 ～ 602510 ～ 100Epoxy GlassEpoxy GlassDimension Selectable-5--

-

1 6 Days 1040 ～ 603010 ～ 100Epoxy GlassEpoxy GlassDimension Selectable-5--

-

1 6 Days 104 ～ 10210 ～ 30FluororesinFluororesinDimension Selectable-5--

-

1 6 Days 105 ～ 10310 ～ 30FluororesinFluororesinDimension Selectable-5--

-

1 6 Days 106 ～ 25410 ～ 50FluororesinFluororesinDimension Selectable-5--

-

1 6 Days 108 ～ 25510 ～ 50FluororesinFluororesinDimension Selectable-5--

-

1 6 Days 108 ～ 25610 ～ 50FluororesinFluororesinDimension Selectable-5--

-

1 6 Days 1010 ～ 30810 ～ 100FluororesinFluororesinDimension Selectable-5--

-

1 6 Days 1012 ～ 501010 ～ 100FluororesinFluororesinDimension Selectable-5--

-

1 6 Days 1015 ～ 501210 ～ 100FluororesinFluororesinDimension Selectable-5--

-

1 6 Days 1020 ～ 601510 ～ 100FluororesinFluororesinDimension Selectable-5--

-

1 6 Days 1020 ～ 601610 ～ 100FluororesinFluororesinDimension Selectable-5--

-

1 6 Days 1025 ～ 602010 ～ 100FluororesinFluororesinDimension Selectable-5--

-

1 6 Days 1030 ～ 602510 ～ 100FluororesinFluororesinDimension Selectable-5--

-

1 6 Days 1040 ～ 603010 ～ 100FluororesinFluororesinDimension Selectable-5--

-

1 6 Days 104 ～ 10210 ～ 30PolyacetalPolyacetalDimension Selectable-5--

-

1 6 Days 105 ～ 12310 ～ 50PolyacetalPolyacetalDimension Selectable-5--

-

1 6 Days 106 ～ 25410 ～ 50PolyacetalPolyacetalDimension Selectable-5--

-

1 6 Days 108 ～ 25510 ～ 50PolyacetalPolyacetalDimension Selectable-5--

-

1 6 Days 108 ～ 25610 ～ 50PolyacetalPolyacetalDimension Selectable-5--

-

1 6 Days 1010 ～ 30810 ～ 100PolyacetalPolyacetalDimension Selectable-5--

-

1 6 Days 1012 ～ 501010 ～ 100PolyacetalPolyacetalDimension Selectable-5--

-

1 6 Days 1015 ～ 501210 ～ 100PolyacetalPolyacetalDimension Selectable-5--

Loading...

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>

Back to the Category Plastic Washers/Plastic Sleeves

Technical Drawing - Plastic Washers

Resin Collars/Flanged/POM/MC Nylon/Bakelite/PEEK/Epoxy Glass:Related Image
Dimension Selectable: When (D+4) ≥ 30 for CLJHB, CLJHN and CLJHE, the (D+4) part tolerance will be 0/-0.3.
Dimension Configurable: When H ≥ 30 for FCLJHB, FCLJHN and FCLJHE, the H dimension tolerance will be 0/-0.3.
Open the technical drawing in the new window

Specification Tables - Plastic Washers

■Dimension Selectable
Part NumberDLUnit Price
TypeVSelection0.5mm IncrementCLJHJ CLJHKCLJHM CLJHWCLJHDCLJHBCLJHNCLJHTCLJHF CLJHPCLJHE
CLJHJ
CLJHK
CLJHM
CLJHW
CLJHD
CLJHT
CLJHB
CLJHN
CLJHF
CLJHP
CLJHE		2
3		(4)56810         (4)V2 only10.0~  25.0         
       25.5~  30.0         
4
5		  (6)8101112131415162025 (6)V4 only10.0~  25.0         
   25.5~  50.0         
6   8101112131415162025     10.0~  25.0         
        25.5~  50.0         
8    10111213141516202530    10.0~  25.0         
        25.5~  50.0         
        50.5~  75.0      ---
        75.5~100.0      
10      1213141516202530    10.0~  25.0         
      25.5~  50.0         
      50.5~  75.0      ---
      75.5~100.0      
              354050 10.0~  25.0         
               25.5~  50.0         
               50.5~  75.0      ---
               75.5~100.0      
12         1516202530    10.0~  25.0         
       25.5~  50.0         
       50.5~  75.0      ---
       75.5~100.0      
              354050 10.0~  25.0         
               25.5~  50.0         
               50.5~  75.0      ---
               75.5~100.0      
            202530    10.0~  25.0         
            25.5~  50.0         
            50.5~  75.0      ---
            75.5~100.0      
15              354050 10.0~  25.0         
            25.5~  50.0         
            50.5~  75.0      ---
16           75.5~100.0      
                  6010.0~  25.0     ----
                  25.5~  50.0     
                  50.5~  75.0     
                  75.5~100.0     
            (25)30(25)V20 only10.0~  25.0         
            25.5~  50.0         
            50.5~  75.0      ---
            75.5~100.0      
20              354050 10.0~  25.0         
             25.5~  50.0         
             50.5~  75.0      ---
25            75.5~100.0      
                  6010.0~  25.0     ----
                  25.5~  50.0     
                  50.5~  75.0     
                  75.5~100.0     
30               4050 10.0~  25.0         
                25.5~  50.0         
                50.5~  75.0      ---
                75.5~100.0      
                 6010.0~  25.0     ----
              25.5~  50.0     
              50.5~  75.0     
              75.5~100.0     
H≤50 for CLJHT, CLJHF, CLJHP and CLJHE.
No specification available for those without value.
■Dimension Configurable
Part NumberVDHTLUnit Price
VV2.6 or Less Selection0.5mm Increment0.5mm Increment1mm Increment0.5mm IncrementFCLJHJ FCLJHKFCLJHM FCLJHWFCLJHDFCLJHTFCLJHBFCLJHNFCLJHF FCLJHPFCLJHE
V3.0 or More, 0.5mm IncrementsD21 or More: 1mm IncrementH83 or More: 1mm Increment
      4.0~10
(0.5mm Increment)		6.0~20
(0.5mm Increment)		 10.0~ 25.0         
       25.5~ 50.0         
       50.5~ 75.0      ---
 0 75.5~100.0      
FCLJHJ(No Hole Machining)10.5~20
(0.5mm Increment)		12.5~30
(0.5mm Increment)		 10.0~ 25.0         
       25.5~ 50.0         
FCLJHK2.0 50.5~ 75.0      ---
       75.5~100.0      
FCLJHM2.621~30
(1mm Increment)		23~40
(0.5mm Increment)		 10.0~ 25.0         
       25.5~ 50.0         
FCLJHW      50.5~ 75.0      ---
       75.5~100.0      
FCLJHD3.0~58.031~40
(1mm Increment)		33~50
(0.5mm Increment)		 10.0~ 25.0         
 (0.5mm Increment) 25.5~ 50.0         
FCLJHT 2~2050.5~ 75.0      ---
 10.0 ≤L≤ 50.0 75.5~100.0      
FCLJHB V≤D–241~50
(1mm Increment)		43~60
(0.5mm Increment)		L–T≥110.0~ 25.0         
   25.5~ 50.0         
FCLJHN50.5 ≤L≤ 100 50.5~ 75.0      ---
 V≤D–6 75.5~100.0      
FCLJHF 51~60
(1mm Increment)		53~70
(0.5mm Increment)		 10.0~ 25.0   -  ---
       25.5~ 50.0     
FCLJHP      50.5~ 75.0     
 58.5~90.0 75.5~100.0     
FCLJHEV≤D–661~80
(1mm Increment)		63~90
(0.5mm Increment)		 10.0~ 25.0   -  ---
       25.5~ 50.0     
       50.5~ 75.0     
       75.5~100.0     
      81~100
(1mm Increment)		83~110
(1mm Increment)		 10.0~ 25.0   -  ---
       25.5~ 50.0     
       50.5~ 75.0     
       75.5~100.0     
Machining Conditions H–D≥2 D4~5Lmax=50 L≤Vx8 H≤50 for FCLJHT, FCLJHF, FCLJHP and FCLJHE.
No specification available for those without value.

Alterations - Plastic Washers

Resin Collars/Flanged/POM/MC Nylon/Bakelite/PEEK/Epoxy Glass:Related Image
 

Basic information

Shape Shouldered Hole Type Through Hole Sale Type Sold Separately

Configure

Clear all

287Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Outer Diameter(mm)

    • 4
    • 5
    • 6
    • 8
    • 10
    • 11
    • 12
    • 13
    • 14
    • 15
    • 16
    • 20
    • 25
    • 30
    • 35
    • 40
    • 50
    • 60

     [4-20/0.5mm Unit(s)][21-100/1mm Unit(s)]

    Clear

  • Internal Diameter(mm)

    • 0
    • 2
    • 2.6
    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 15
    • 16
    • 20
    • 25
    • 30

     [3-90/0.5mm Unit(s)]

    Clear

  • Thickness and length

     [10-100/0.5]

    Clear

  • Material

    • MC Nylon
    • Polyacetal
    • Bakelite
    • Epoxy Glass
    • PEEK
    • Fluororesin

    Clear

  • Material Detail

    • MC Nylon (EN MC501 CD R2 Equiv.)
    • MC Nylon (EN MC501 CD R6 Equiv.)
    • Bakelite (Fabric Type)
    • Bakelite (Paper Type)
    • Epoxy Glass
    • Fluororesin
    • MC Nylon
    • PEEK
    • Polyacetal

    Clear

  • Dimension Selecting Method

    • Dimension Configurable Type
    • Dimension Selectable

    Clear

  • Flange Dia. H(Ø)

     [6-90/0.5Ø Unit(s)][83-110/1Ø Unit(s)]

    Clear

  • Flange Thickness T(mm)

    • 5

     [2-20/1mm Unit(s)]

    Clear

  • Tapping Coarse Thread Dia. Selection [VM]

    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20

    Clear

  • Tapping Fine Thread Dia. Selection [VMA]

    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 16
    • 18
    • 20

    Clear

  • Type

    • CLJHB
    • CLJHD
    • CLJHE
    • CLJHF
    • CLJHJ
    • CLJHK
    • CLJHM
    • CLJHN
    • CLJHP
    • CLJHT
    • CLJHW
    • FCLJHB
    • FCLJHD
    • FCLJHE
    • FCLJHF
    • FCLJHJ
    • FCLJHK
    • FCLJHM
    • FCLJHN
    • FCLJHP
    • FCLJHT
    • FCLJHW

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 6 Days or Less

    Reset

Optional Attributes

Frequently Asked Questions (FAQ)

Question:

Do ceramic washers have the same strength as ceramic sleeves?
Answer:

Due to a radial lamination of the ceramic material, ceramic sleeves have a lower compressive strength than ceramic washers (vertically laminated). Detailed information and comparison values can be found here.
Question:

What is the thermal expansion of plastic sleeves and plastic washers?
Answer:

Plastic sleeves and plastic washers react sensitively to fluctuations in ambient temperature. The length of synthetic resin sleeves varies depending in a ratio of up to 1°C = 0.1 mm depending on the temperature . Details on the thermal expansion of other materials available at MISUMI can be found in this PDF.
Question:

Do you have washers made of a material that provide electric insulation?
Answer:

Most plastics have an electrically insulating effect. The level of insulation differs depending on the material. Polycarbonate has a very good electrically insulating effect. In addition to its good electrical insulating effect, it is also superior to most conventional plastics in terms of mechanical aspects.
Question:

Which material is suitable for both low and high temperatures?

Answer:

Polyether ether ketone (PEEK) and polytetrafluoroethylene (PTFE) have an operating temperature of approx. -50°C (PEEK), respectively -40°C (PTFE) and up to +250°C.

Show more FAQ Close

Complementary Products

MISUMI Unit еxample related to this product

Search for оther еxamples

back next

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.