Edge Trim / Thermoplastic Elastomer (TPE)

Type	Main Body					Internal Metal Strip
	[M] Material	Material Properties				[M] Material
		Specific Gravity	Heat Resistance	Low Temp. Resistance	Compression Set
TR□T	Polyolefin Thermoplastic Elastomer (TPE)	0.95	+135°C	−60°C	15 to 25%	Aluminum
TRCS	Silicon Rubber	1.2	+200°C	−60°C	16%	EN 1.0330 Equiv.

[ ! ] TPE does not produce dioxin when burned.
[ ! ] Because of the internal metal strip, it does not require adhesives to install.
[!] Can be cut with nippers, scissors, etc. Because of the internal metal strip, use of sheet metal scissors is recommended.
     Also, since the cut surface may be crushed during cutting, we ask that customers devise their own methods.

Part Number		Color - Pattern	L Configurable	A	B	W	t	Minimum Bending Radius mm			Applicable Plate Thickness (T Range)
Type	T							Bending Direction (1)	Bending Direction (2)	Bending Direction (3)
TRAT	0.4	B−5	L1 to L100 (1 m Increments)	4.4	9.7	0.4	1.9	30	30	20	0.3 to 0.6
	0.8			4.8	9.5	0.8					0.7 to 1.2
	1.6			5.6	9.1	1.6					1.2 to 1.6
	2.4			6.4	8.9	2.4					2.0 to 2.4
TRBT	0.8	B−5 W−5		5.6	11.3	0.8	2.3	40	40	20	0.6 to 1.2
	1.6			6.4	11.1	1.6					1.2 to 2.0
	2.4			7.2	11.0	2.4					2.0 to 2.5
	3.2			8.0	10.6	3.2					2.6 to 3.2
TRCT	1.6			6.0	14.5	1.6	2.2	30	30	30	1.2 to 2.4
	3.2			7.6	14.0	3.2					2.4 to 3.6
	4.8			9.2	13.3	4.8					4.0 to 5.0
	6.4			10.8	12.7	6.4					5.5 to 6.4
TRDT	3.2			7.8	19.0	3.2	2.3	50	50	50	2.3 to 4.0
	6.4			11.0	17.5	6.4					6.0 to 7.0
	8.0			12.6	16.7	8.0					7.0 to 8.5
	9.5			14.1	15.9	9.5					9.0 to 9.5
	12.7			17.3	14.6	12.7					12.0 to 12.7
TRCS	3.2	G−6 B−6	L1 to L75 (1 m Increments)	9.6	13.2	4.6	2.5	50	50	50	1.0 to 3.2

[!] Minimum bending radius value is experimental ones and not guaranteed. Use them as reference.