Air Manifold Block -T-Shaped Hole Type-

● Standard Hole Shape

● Mounting Hole Change

Through Hole (NA)

Tapped Hole (T)

Counterbore Tapped Hole (ZT)

● Side Mounting Hole Change

● Side Mounting Hole Change

Side Counterbore (YZ)

Side Through (YN)

Thread
JIS B0203 Rc (PT) JIS B0202 G (PF): ISO 228-1 Interchangeable
ANSI/ASME B.I.20.1－1983 (NPT)
* Drawing for 3 Circuit Type is selected. The total number of Q, R and S threads is 9.
[ ! ] Mounting hole shape can be selected freely.

[ ! ] Standard hole shape is selected when no hole shape modification is specified.
For 20 sq., however, through hole is selected by default.

[L Dimension Calculation]
Example: For BMGFP3- to -P25
L = N × P + 2E = (Number of Circuits 3 - 1) × 25 + 2 × 20 = 90

[!] Unless otherwise specified, the dimension tolerance conforms to JIS B 0405 Class m. However, the A and B dimension tolerances and M × 2 tapped depth tolerance are excluded.

Part Number				Rc (PT), NPT, M (Coarse) Selection	Pitch P		Number of Pitches N	Total Number of Q, R and S Threads	A	B	E	F	X	Y	Mounting Hole
Type		Mounting Hole Change	Number of Circuits	Q·R·S	Standard	Configurable 1 mm Increments									M
(20 sq.)		T (Tapped) YN(Side Through)	1	1 (1/8) M3 (M3) M4 (M4) 5 (M5)	—	—	0	3	20	20	20	10	5	4	M5
Pitch Standard BMGFC BMGFCA	Pitch Configurable BMGFCP BMGFCAP		2		15	15 to 50	1	6
			3				2	9
			4				3	12
			5				4	15
			6				5	18
			7			20 to 50	6	21
			8				7	24
(25 sq.)		NA (Through) T(Tapped) ZT(Counterbore Tapped) YZ(Side Counterbore) YN(Side Through)	1	1 (1/8) 2 (1/4) 5 (M5) 1 N (NPT1/8) 2 N (NPT1/4)	—	—	0	3	25	25	20	12.5	7.5	7	M5
Pitch Standard BMGF BMGFA	Pitch Configurable BMGFP BMGFAP		2		30	20 to 50	1	6
			3				2	9
			4				3	12
			5				4	15
			6			25 to 50	5	18
			7				6	21
			8				7	24
(35 sq.)			1	1 (1/8) 2 (1/4) 5 (M5) 1 N (NPT1/8) 2 N (NPT1/4)	—	—	0	3	35	35	20	17.5	7.5	7	M5
Pitch Standard BMGFK	Pitch Configurable BMGFKP		2		30	20 to 50	1	6
			3				2	9
			4				3	12
			5				4	15
			6			25 to 50	5	18
			7				6	21
			8				7	24
(50 sq.)			1	2 (1/4) 3 (3/8) 4 (1/2)	—	—	0	3	50	50	25	25	8.5	8.5	M8
Pitch Standard BMGFL BMGFLA			2		40	—	1	6
			3				2	9
			4				3	12
			5				4	15
			6				5	18

[!] By inserting "G-" before part number, the thread type can be changed to the G (PF) Thread as part of ordering. (Ex. G-BMGF) For ordering, see the Ordering Example.
[ ! ]For Q, R and S, specify 1, 2, 3, 4, 5, M3, M4, 1N or 2N indicated before (). [!]Single Circuit is not available for Pitch Configurable Type.
[!]Specify the pitch taking into consideration the necessary dimensions for fitting the couplings. [!]Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting hole at each midpoint of the 2-3 port pitch, and 5-6 port pitch from the left to the right. (Except for 20 Sq. and 25 Sq.)
[ ! ] For Block Square 25 Type, when 1/4 is selected for both tapered threads at right angles, the tapered male threads may interfere with each other. Select Block Square 35 Type instead.
[!]Select NA, T or ZT for the mounting hole shape of 7 and 8 Circuit Types.