Register
Configure
MISUMI

Manifold Hydraulic / Outlets 1 Side / 2 Inlets

Manifold Hydraulic / Outlets 1 Side / 2 Inlets

Part number:

Still undefined. 785 possible part numbers found.
Quantity:

Outline drawing and specifications table

Manifold Hydraulic/Outlets 1 Side/2 Inlets:Related Image

Type Material Surface TreatmentMax. Operating Pressure
Pitch (P) StandardPitch (P) Configurable
25x32 Sq.30x35 Sq.50 Sq.60 Sq.25x32 Sq.30x35 Sq.50 Sq.
BMBSBMBFBMBFLBMBLBMBSPBMBFPBMBFLPEN 1.0038 Equiv.Trivalent Chromate20.6MPa≈210kgf/cm2 or less
-BMBFMBMBFLM--BMBFMPBMBFLMPElectroless Nickel Plating
BMBSRBMBFRBMBFLR-BMBSRPBMBFRPBMBFLRPEN 1.4301 Equiv.-
-BMBFS---BMBFSP-EN 1.4401 Equiv.
-BMBFC-----Brass1MPa≈10kgf/cm2 or less

Specifications

Part Number-Q-G-K-P  
 
Type Mounting Hole Change Number of
Circuits
BMBF
BMBFLP
G-BMBFLP
NA
NA
 3
3
3
-
-
-		Q3
Q3
Q3		-
-
-		G4
G4
G4
-
-
-		K2
K6
K6
-
-
P45
P45		 

(G Thread)
Mounting Hole DimensiondDhD1d1h1
M55.59.55.58*4.24.5
M66.6116.59.55.15.5
M88.5148.5116.86.5
* Only for EN 1.4301 Equiv., d1 dimension is 4.3.
Part NumberRc (PT), NPT SelectionPitch PNumber of Pitches
N		Total Number of
Q, G and K Threads		ABEFXYMounting Hole
TypeMounting Hole ChangeNumber of CircuitsQG, KStandardConfigurable 1mm IncrementM
(25x32 Sq.)ZB (Back Surface Counterbore)


NA (Through)


T (Tapped)


ZT (Counterbore Tapped)		11 (1/8)
2 (1/4)		1 (1/8)
2 (1/4)		--0325322020156M5

Pitch Standard
BMBS

BMBSR
Pitch Configurable
BMBSP

BMBSRP
23020~5014
325
436
547
658
769
820~40710
(30x35 Sq.)11 (1/8)
2 (1/4)
3 (3/8)
1N (NPT1/8)
2N (NPT1/4)
3N (NPT3/8)		2 (1/4)
3 (3/8)
4 (1/2)
2N (NPT1/4)
3N (NPT3/8)
4N (NPT1/2)		--0330352522157M6

Pitch Standard
BMBF
BMBFM
BMBFR
BMBFS
BMBFC		Pitch Configurable
BMBFP
BMBFMP
BMBFRP
BMBFSP
24025~501420
325
436
547
658
769
825~40710
(50 Sq.)12 (1/4)
3 (3/8)
4 (1/2)
6 (3/4)		2 (1/4)
3 (3/8)
4 (1/2)
6 (3/4)		--0350503028208M8

Pitch Standard
BMBFL
BMBFLM
BMBFLR
Pitch Configurable
BMBFLP
BMBFLMP
BMBFLRP
26035~6014
325
436
547
658
(60 Sq.)16 (3/4)
8 (1)		8 (1)--0360604035259M8
Pitch Standard
BMBL		 26014
325
436
By inserting "G-" before part number, the thread type can be changed to the G (PF) Thread as part of ordering. (Ex.: G-BMBF) For ordering, see the Ordering Example.
For Q, G and K, specify 1, 2, 3, 4, 6, 8, 1N, 2N, 3N or 4N indicated before ( ). Single Circuit is not available for Pitch Configurable Type. SUS316 or Brass is for up to 6 connections.
Specify the pitch taking into consideration the necessary dimensions for fitting the couplings. Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting hole at each midpoint of the 2 - 3 port pitch, and 5 - 6 port pitch from the left to the right.

Part number list

Number of items
  • 1
  • 2
  • 3
  • 4
  • 5
    • ...
    14
  • Next
    • Part number
    BMBFLM1-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLM2-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLM3-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLM4-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLM5-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLM6-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLMNA1-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLMNA2-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLMNA3-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLMNA4-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLMNA5-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLMNA6-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLMP2-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
    BMBFLMP3-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
    BMBFLMP4-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
    BMBFLMP5-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
    BMBFLMP6-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
    BMBFLMPNA2-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
    BMBFLMPNA3-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
    BMBFLMPNA4-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
    BMBFLMPNA5-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
    BMBFLMPNA6-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
    BMBFLMPT2-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
    BMBFLMPT3-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
    BMBFLMPT4-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
    BMBFLMPT5-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
    BMBFLMPT6-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
    BMBFLMPZB2-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
    BMBFLMPZB3-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
    BMBFLMPZB4-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
    BMBFLMPZB5-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
    BMBFLMPZB6-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
    BMBFLMPZT2-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
    BMBFLMPZT3-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
    BMBFLMPZT4-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
    BMBFLMPZT5-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
    BMBFLMPZT6-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
    BMBFLMT1-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLMT2-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLMT3-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLMT4-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLMT5-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLMT6-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLMZB1-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLMZB2-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLMZB3-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLMZB4-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLMZB5-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLMZB6-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLMZT1-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLMZT2-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLMZT3-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLMZT4-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLMZT5-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFLMZT6-Q[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
    BMBFM1-[Q1N,Q2N,Q3N]-[G2N,G3N,G4N]-[K2N,K3N,K4N]
    BMBFM1-[Q1N,Q2N,Q3N]-[G2N,G3N,G4N]-K[2,3,4]
    BMBFM1-[Q1N,Q2N,Q3N]-G[2,3,4]-[K2N,K3N,K4N]
    BMBFM1-[Q1N,Q2N,Q3N]-G[2,3,4]-K[2,3,4]
    BMBFM1-Q[1,2,3]-[G2N,G3N,G4N]-[K2N,K3N,K4N]

    Shape

    Material

    Surface Treatment

    Block Size

    (mm)

    Number of Circuits

    (Circuits)

    Thread Size / Type

    Mounting Hole Change

    Pitch P

    (mm)

    Pitch Standard / Configurable

    Application

    Drawing G Part Thread Dia. NPT Selection [G]

    Drawing K Part Thread Dia. NPT Selection [K]

    Drawing Q Part Thread Dia. NPT Selection [Q]

    Select a value for PT/PF Thread Dia. on G (in Drawing). [G] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)

    Select a value for PT/PF Thread Dia. on K (in Drawing). [K] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)

    Select a value for PT/PF Thread Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)

    		RoHS?Minimum order quantity
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    1
    Standard Thread {PT, m (Coarse) Thread}
    Not Specified (Front Surface Counterbore)
    -
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    2
    Standard Thread {PT, m (Coarse) Thread}
    Not Specified (Front Surface Counterbore)
    60
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    3
    Standard Thread {PT, m (Coarse) Thread}
    Not Specified (Front Surface Counterbore)
    60
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    4
    Standard Thread {PT, m (Coarse) Thread}
    Not Specified (Front Surface Counterbore)
    60
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    5
    Standard Thread {PT, m (Coarse) Thread}
    Not Specified (Front Surface Counterbore)
    60
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    6
    Standard Thread {PT, m (Coarse) Thread}
    Not Specified (Front Surface Counterbore)
    60
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    1
    Standard Thread {PT, m (Coarse) Thread}
    NA (Through)
    -
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    2
    Standard Thread {PT, m (Coarse) Thread}
    NA (Through)
    60
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    3
    Standard Thread {PT, m (Coarse) Thread}
    NA (Through)
    60
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    4
    Standard Thread {PT, m (Coarse) Thread}
    NA (Through)
    60
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    5
    Standard Thread {PT, m (Coarse) Thread}
    NA (Through)
    60
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    6
    Standard Thread {PT, m (Coarse) Thread}
    NA (Through)
    60
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    2
    Standard Thread {PT, m (Coarse) Thread}
    Not Specified (Front Surface Counterbore)
    35 ～ 60
    Configurable Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    3
    Standard Thread {PT, m (Coarse) Thread}
    Not Specified (Front Surface Counterbore)
    35 ～ 60
    Configurable Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    4
    Standard Thread {PT, m (Coarse) Thread}
    Not Specified (Front Surface Counterbore)
    35 ～ 60
    Configurable Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    5
    Standard Thread {PT, m (Coarse) Thread}
    Not Specified (Front Surface Counterbore)
    35 ～ 60
    Configurable Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    6
    Standard Thread {PT, m (Coarse) Thread}
    Not Specified (Front Surface Counterbore)
    35 ～ 60
    Configurable Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    2
    Standard Thread {PT, m (Coarse) Thread}
    NA (Through)
    35 ～ 60
    Configurable Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    3
    Standard Thread {PT, m (Coarse) Thread}
    NA (Through)
    35 ～ 60
    Configurable Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    4
    Standard Thread {PT, m (Coarse) Thread}
    NA (Through)
    35 ～ 60
    Configurable Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    5
    Standard Thread {PT, m (Coarse) Thread}
    NA (Through)
    35 ～ 60
    Configurable Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    6
    Standard Thread {PT, m (Coarse) Thread}
    NA (Through)
    35 ～ 60
    Configurable Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    2
    Standard Thread {PT, m (Coarse) Thread}
    T (Tapped)
    35 ～ 60
    Configurable Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    3
    Standard Thread {PT, m (Coarse) Thread}
    T (Tapped)
    35 ～ 60
    Configurable Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    4
    Standard Thread {PT, m (Coarse) Thread}
    T (Tapped)
    35 ～ 60
    Configurable Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    5
    Standard Thread {PT, m (Coarse) Thread}
    T (Tapped)
    35 ～ 60
    Configurable Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    6
    Standard Thread {PT, m (Coarse) Thread}
    T (Tapped)
    35 ～ 60
    Configurable Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    2
    Standard Thread {PT, m (Coarse) Thread}
    ZB (Back Surface Counterbore)
    35 ～ 60
    Configurable Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    3
    Standard Thread {PT, m (Coarse) Thread}
    ZB (Back Surface Counterbore)
    35 ～ 60
    Configurable Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    4
    Standard Thread {PT, m (Coarse) Thread}
    ZB (Back Surface Counterbore)
    35 ～ 60
    Configurable Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    5
    Standard Thread {PT, m (Coarse) Thread}
    ZB (Back Surface Counterbore)
    35 ～ 60
    Configurable Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    6
    Standard Thread {PT, m (Coarse) Thread}
    ZB (Back Surface Counterbore)
    35 ～ 60
    Configurable Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    2
    Standard Thread {PT, m (Coarse) Thread}
    ZT (Counterbore Tapped)
    35 ～ 60
    Configurable Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    3
    Standard Thread {PT, m (Coarse) Thread}
    ZT (Counterbore Tapped)
    35 ～ 60
    Configurable Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    4
    Standard Thread {PT, m (Coarse) Thread}
    ZT (Counterbore Tapped)
    35 ～ 60
    Configurable Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    5
    Standard Thread {PT, m (Coarse) Thread}
    ZT (Counterbore Tapped)
    35 ～ 60
    Configurable Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    6
    Standard Thread {PT, m (Coarse) Thread}
    ZT (Counterbore Tapped)
    35 ～ 60
    Configurable Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    1
    Standard Thread {PT, m (Coarse) Thread}
    T (Tapped)
    -
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    2
    Standard Thread {PT, m (Coarse) Thread}
    T (Tapped)
    60
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    3
    Standard Thread {PT, m (Coarse) Thread}
    T (Tapped)
    60
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    4
    Standard Thread {PT, m (Coarse) Thread}
    T (Tapped)
    60
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    5
    Standard Thread {PT, m (Coarse) Thread}
    T (Tapped)
    60
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    6
    Standard Thread {PT, m (Coarse) Thread}
    T (Tapped)
    60
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    1
    Standard Thread {PT, m (Coarse) Thread}
    ZB (Back Surface Counterbore)
    -
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    2
    Standard Thread {PT, m (Coarse) Thread}
    ZB (Back Surface Counterbore)
    60
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    3
    Standard Thread {PT, m (Coarse) Thread}
    ZB (Back Surface Counterbore)
    60
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    4
    Standard Thread {PT, m (Coarse) Thread}
    ZB (Back Surface Counterbore)
    60
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    5
    Standard Thread {PT, m (Coarse) Thread}
    ZB (Back Surface Counterbore)
    60
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    6
    Standard Thread {PT, m (Coarse) Thread}
    ZB (Back Surface Counterbore)
    60
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    1
    Standard Thread {PT, m (Coarse) Thread}
    ZT (Counterbore Tapped)
    -
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    2
    Standard Thread {PT, m (Coarse) Thread}
    ZT (Counterbore Tapped)
    60
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    3
    Standard Thread {PT, m (Coarse) Thread}
    ZT (Counterbore Tapped)
    60
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    4
    Standard Thread {PT, m (Coarse) Thread}
    ZT (Counterbore Tapped)
    60
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    5
    Standard Thread {PT, m (Coarse) Thread}
    ZT (Counterbore Tapped)
    60
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    50 x 50
    6
    Standard Thread {PT, m (Coarse) Thread}
    ZT (Counterbore Tapped)
    60
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    -
    2 ～ 6
    2 ～ 6
    2 ～ 6
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    30 x 35
    1
    Standard Thread {PT, m (Coarse) Thread}
    Not Specified (Front Surface Counterbore)
    -
    Fixed Type
    For hydraulic / Water Pressure
    1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]
    1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]
    1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]
    -
    -
    -
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    30 x 35
    1
    Standard Thread {PT, m (Coarse) Thread}
    Not Specified (Front Surface Counterbore)
    -
    Fixed Type
    For hydraulic / Water Pressure
    1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]
    -
    1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]
    -
    2 ～ 4
    -
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    30 x 35
    1
    Standard Thread {PT, m (Coarse) Thread}
    Not Specified (Front Surface Counterbore)
    -
    Fixed Type
    For hydraulic / Water Pressure
    -
    1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]
    1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]
    2 ～ 4
    -
    -
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    30 x 35
    1
    Standard Thread {PT, m (Coarse) Thread}
    Not Specified (Front Surface Counterbore)
    -
    Fixed Type
    For hydraulic / Water Pressure
    -
    -
    1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]
    2 ～ 4
    2 ～ 4
    -
    10
    1 pieces
    Blind Lateral Hole, Upper Hole
    Steel for General Structure
    Electroless Nickel Plating
    30 x 35
    1
    Standard Thread {PT, m (Coarse) Thread}
    Not Specified (Front Surface Counterbore)
    -
    Fixed Type
    For hydraulic / Water Pressure
    1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]
    1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]
    -
    -
    -
    1 ～ 3
    10
    1 pieces
    Unit price (excluding VAT)(Unit price including VAT)
    Standard shipping days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    12 working days
    -
    ( - )
    10 working days
    -
    ( - )
    10 working days
    -
    ( - )
    10 working days
    -
    ( - )
    10 working days
    -
    ( - )
    10 working days
  • 1
  • 2
  • 3
  • 4
  • 5
    • ...
    14
  • Next

    • More Information