• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Manifold Pneumatic / Outlets 2 Sides / 2 Inlets

Manifold Pneumatic / Outlets 2 Sides / 2 Inlets

MISUMI

MISUMI

  • Order quantities extended (D-JIT)

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Manifold Pneumatic/Outlets 2 Sides/2 Inlets:Related Image

Type Material Surface TreatmentMax. Operating Pressure
Pitch (P) StandardPitch (P) Configurable
25 Sq.30x40 Sq.50 Sq.25 Sq.30x40 Sq.50 Sq.
BMUACBMUAFBMUALBMUACPBMUAFPBMUALPAluminum Alloy 5000 series-1MPa≈10kgf/cm2 or less
BMUACABMUAFABMUALABMUACAPBMUAFAPBMUALAPClear Anodize

Specifications

Part Number-Q-R-G-K-P  
 
Type Mounting Hole Change Number of Circuits
BMUAC
BMUAFP
G-BMUAFP		 T
ZT
ZT		 2
3
3		-
-
-		Q1
Q1
Q1		-
-
-		R5
R1
R1		-
-
-		G1
G2
G2		-
-
-		K1
K2
K2
-
-
P40
P40		 

(G Thread)
Part NumberRc (PT), NPT, M (Coarse) SelectionPitch PNumber of Pitches
N		Total Number of
Q, R, G and K Threads		ABEFXYMounting Hole
TypeMounting Hole ChangeNumber of CircuitsQ, R, G, KStandardConfigurable 1mm IncrementM
(25 Sq.)T (Tapped)11 (1/8)
M3 (M3)*
M4 (M4)*
5 (M5)*		--0425252012.5104M5

Pitch Standard
BMUAC

BMUACA		Pitch Configurable
BMUACP

BMUACAP		21515~5016
328
4310
5412
6514
7*15~40616
8*15~35718
(30x40 Sq.)ZB (Back Surface Counterbore)


NA (Through)


T (Tapped)


ZT (Counterbore Tapped)		11 (1/8)
2 (1/4)
5 (M5)*
1N (NPT1/8)
2N (NPT1/4)		--04304020207.57M5

Pitch Standard
BMUAF

BMUAFA		Pitch Configurable
BMUAFP

BMUAFAP		23020~5016
328
4310
5412
6514
7*15~40616
8*15~35718
(50 Sq.)12 (1/4)
3 (3/8)
4 (1/2)		--04505025258.58.5M8
Pitch Standard
BMUAL

BMUALA		Pitch Configurable
BMUALP

BMUALAP		24035~6016
328
4310
5412
6514
By inserting "G-" before part number, the thread type can be changed to the G (PF) Thread as part of ordering. (Ex.: G-BMUAF) For ordering, see the Ordering Example.
For Q, R, G and K, specify 1, 2, 3, 4, 5, M3, M4, 1N or 2N indicated before ( ).
Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an
Specify the pitch taking into consideration the necessary dimensions for fitting the couplings. additional mounting hole at each midpoint of the 2 - 3 port pitch, and 5 - 6 port pitch from the left to the right.
When * marked 7 or 8 Circuit is selected from 25 Sq. / 30x40 Sq., M3, M4 ∙ and 5(M5) are not available for G or K.
M3, M4 and 5(M5) are not available for 25 Sq., 30x40 Sq. Pitch Configurable Type G and K.Single Circuit is not available for Pitch Configurable Type.

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
Part Number
BMUAC1-Q[1,​5]-R[1,​5]-G[1,​5]-K[1,​5]
BMUAC1-Q[1,​5]-R[1,​5]-G[1,​5]-KM[3,​4]
BMUAC1-Q[1,​5]-R[1,​5]-GM[3,​4]-K[1,​5]
BMUAC1-Q[1,​5]-R[1,​5]-GM[3,​4]-KM[3,​4]
BMUAC1-Q[1,​5]-RM[3,​4]-G[1,​5]-K[1,​5]
BMUAC1-Q[1,​5]-RM[3,​4]-G[1,​5]-KM[3,​4]
BMUAC1-Q[1,​5]-RM[3,​4]-GM[3,​4]-K[1,​5]
BMUAC1-Q[1,​5]-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMUAC1-QM[3,​4]-R[1,​5]-G[1,​5]-K[1,​5]
BMUAC1-QM[3,​4]-R[1,​5]-G[1,​5]-KM[3,​4]
BMUAC1-QM[3,​4]-R[1,​5]-GM[3,​4]-K[1,​5]
BMUAC1-QM[3,​4]-R[1,​5]-GM[3,​4]-KM[3,​4]
BMUAC1-QM[3,​4]-RM[3,​4]-G[1,​5]-K[1,​5]
BMUAC1-QM[3,​4]-RM[3,​4]-G[1,​5]-KM[3,​4]
BMUAC1-QM[3,​4]-RM[3,​4]-GM[3,​4]-K[1,​5]
BMUAC1-QM[3,​4]-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMUAC2-Q[1,​5]-R[1,​5]-G[1,​5]-K[1,​5]
BMUAC2-Q[1,​5]-R[1,​5]-G[1,​5]-KM[3,​4]
BMUAC2-Q[1,​5]-R[1,​5]-GM[3,​4]-K[1,​5]
BMUAC2-Q[1,​5]-R[1,​5]-GM[3,​4]-KM[3,​4]
BMUAC2-Q[1,​5]-RM[3,​4]-G[1,​5]-K[1,​5]
BMUAC2-Q[1,​5]-RM[3,​4]-G[1,​5]-KM[3,​4]
BMUAC2-Q[1,​5]-RM[3,​4]-GM[3,​4]-K[1,​5]
BMUAC2-Q[1,​5]-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMUAC2-QM[3,​4]-R[1,​5]-G[1,​5]-K[1,​5]
BMUAC2-QM[3,​4]-R[1,​5]-G[1,​5]-KM[3,​4]
BMUAC2-QM[3,​4]-R[1,​5]-GM[3,​4]-K[1,​5]
BMUAC2-QM[3,​4]-R[1,​5]-GM[3,​4]-KM[3,​4]
BMUAC2-QM[3,​4]-RM[3,​4]-G[1,​5]-K[1,​5]
BMUAC2-QM[3,​4]-RM[3,​4]-G[1,​5]-KM[3,​4]
BMUAC2-QM[3,​4]-RM[3,​4]-GM[3,​4]-K[1,​5]
BMUAC2-QM[3,​4]-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMUAC3-Q[1,​5]-R[1,​5]-G[1,​5]-K[1,​5]
BMUAC3-Q[1,​5]-R[1,​5]-G[1,​5]-KM[3,​4]
BMUAC3-Q[1,​5]-R[1,​5]-GM[3,​4]-K[1,​5]
BMUAC3-Q[1,​5]-R[1,​5]-GM[3,​4]-KM[3,​4]
BMUAC3-Q[1,​5]-RM[3,​4]-G[1,​5]-K[1,​5]
BMUAC3-Q[1,​5]-RM[3,​4]-G[1,​5]-KM[3,​4]
BMUAC3-Q[1,​5]-RM[3,​4]-GM[3,​4]-K[1,​5]
BMUAC3-Q[1,​5]-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMUAC3-QM[3,​4]-R[1,​5]-G[1,​5]-K[1,​5]
BMUAC3-QM[3,​4]-R[1,​5]-G[1,​5]-KM[3,​4]
BMUAC3-QM[3,​4]-R[1,​5]-GM[3,​4]-K[1,​5]
BMUAC3-QM[3,​4]-R[1,​5]-GM[3,​4]-KM[3,​4]
BMUAC3-QM[3,​4]-RM[3,​4]-G[1,​5]-K[1,​5]
BMUAC3-QM[3,​4]-RM[3,​4]-G[1,​5]-KM[3,​4]
BMUAC3-QM[3,​4]-RM[3,​4]-GM[3,​4]-K[1,​5]
BMUAC3-QM[3,​4]-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMUAC4-Q[1,​5]-R[1,​5]-G[1,​5]-K[1,​5]
BMUAC4-Q[1,​5]-R[1,​5]-G[1,​5]-KM[3,​4]
BMUAC4-Q[1,​5]-R[1,​5]-GM[3,​4]-K[1,​5]
BMUAC4-Q[1,​5]-R[1,​5]-GM[3,​4]-KM[3,​4]
BMUAC4-Q[1,​5]-RM[3,​4]-G[1,​5]-K[1,​5]
BMUAC4-Q[1,​5]-RM[3,​4]-G[1,​5]-KM[3,​4]
BMUAC4-Q[1,​5]-RM[3,​4]-GM[3,​4]-K[1,​5]
BMUAC4-Q[1,​5]-RM[3,​4]-GM[3,​4]-KM[3,​4]
BMUAC4-QM[3,​4]-R[1,​5]-G[1,​5]-K[1,​5]
BMUAC4-QM[3,​4]-R[1,​5]-G[1,​5]-KM[3,​4]
BMUAC4-QM[3,​4]-R[1,​5]-GM[3,​4]-K[1,​5]
BMUAC4-QM[3,​4]-R[1,​5]-GM[3,​4]-KM[3,​4]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSShape Surface Treatment Block Size
(mm) 		Number of Circuits
(Circuits) 		Thread Size / Type Mounting Hole Change Pitch P
(mm) 		Pitch Standard / Configurable Drawing G Part Thread Dia. NPT Selection [G] Drawing K Part Thread Dia. NPT Selection [K] Drawing Q Part Thread Dia. NPT Selection [Q] Drawing R Part Thread Dia. NPT Selection [R] Select a value for M Thread (Coarse) Dia. on G (in Drawing). [GM] 3(M3) 4(M4) Select a value for M Thread (Coarse) Dia. on K (in Drawing). [KM] 3(M3) 4(M4) Select a value for M Thread (Coarse) Dia. on Q (in Drawing). [QM] 3(M3) 4(M4) Select a value for M Thread (Coarse) Dia. on R (in Drawing). [RM] 3(M3) 4(M4) Select a value for PT/PF, M Thread (Coarse) Dia. on G (in Drawing). [G] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) Select a value for PT/PF, M Thread (Coarse) Dia. on K (in Drawing). [K] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) Select a value for PT/PF, M Thread (Coarse) Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) Select a value for PT/PF, M Thread (Coarse) Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 251Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type--------1 ～ 51 ～ 51 ～ 51 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 251Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type-----3 ～ 4--1 ～ 5-1 ～ 51 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 251Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 4----1 ～ 51 ～ 51 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 251Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 43 ～ 4----1 ～ 51 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 251Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type-------3 ～ 41 ～ 51 ～ 51 ～ 5-

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 251Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type-----3 ～ 4-3 ～ 41 ～ 5-1 ～ 5-

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 251Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 4--3 ～ 4-1 ～ 51 ～ 5-

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 251Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 43 ～ 4-3 ～ 4--1 ～ 5-

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 251Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type------3 ～ 4-1 ～ 51 ～ 5-1 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 251Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type-----3 ～ 43 ～ 4-1 ～ 5--1 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 251Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 4-3 ～ 4--1 ～ 5-1 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 251Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 43 ～ 43 ～ 4----1 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 251Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type------3 ～ 43 ～ 41 ～ 51 ～ 5--

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 251Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type-----3 ～ 43 ～ 43 ～ 41 ～ 5---

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 251Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 4-3 ～ 43 ～ 4-1 ～ 5--

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 251Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 43 ～ 43 ～ 43 ～ 4----

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 252Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type--------1 ～ 51 ～ 51 ～ 51 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 252Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type-----3 ～ 4--1 ～ 5-1 ～ 51 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 252Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 4----1 ～ 51 ～ 51 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 252Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 43 ～ 4----1 ～ 51 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 252Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type-------3 ～ 41 ～ 51 ～ 51 ～ 5-

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 252Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type-----3 ～ 4-3 ～ 41 ～ 5-1 ～ 5-

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 252Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 4--3 ～ 4-1 ～ 51 ～ 5-

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 252Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 43 ～ 4-3 ～ 4--1 ～ 5-

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 252Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type------3 ～ 4-1 ～ 51 ～ 5-1 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 252Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type-----3 ～ 43 ～ 4-1 ～ 5--1 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 252Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 4-3 ～ 4--1 ～ 5-1 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 252Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 43 ～ 43 ～ 4----1 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 252Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type------3 ～ 43 ～ 41 ～ 51 ～ 5--

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 252Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type-----3 ～ 43 ～ 43 ～ 41 ～ 5---

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 252Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 4-3 ～ 43 ～ 4-1 ～ 5--

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 252Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 43 ～ 43 ～ 43 ～ 4----

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 253Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type--------1 ～ 51 ～ 51 ～ 51 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 253Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type-----3 ～ 4--1 ～ 5-1 ～ 51 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 253Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 4----1 ～ 51 ～ 51 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 253Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 43 ～ 4----1 ～ 51 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 253Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type-------3 ～ 41 ～ 51 ～ 51 ～ 5-

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 253Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type-----3 ～ 4-3 ～ 41 ～ 5-1 ～ 5-

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 253Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 4--3 ～ 4-1 ～ 51 ～ 5-

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 253Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 43 ～ 4-3 ～ 4--1 ～ 5-

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 253Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type------3 ～ 4-1 ～ 51 ～ 5-1 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 253Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type-----3 ～ 43 ～ 4-1 ～ 5--1 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 253Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 4-3 ～ 4--1 ～ 5-1 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 253Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 43 ～ 43 ～ 4----1 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 253Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type------3 ～ 43 ～ 41 ～ 51 ～ 5--

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 253Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type-----3 ～ 43 ～ 43 ～ 41 ～ 5---

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 253Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 4-3 ～ 43 ～ 4-1 ～ 5--

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 253Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 43 ～ 43 ～ 43 ～ 4----

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 254Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type--------1 ～ 51 ～ 51 ～ 51 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 254Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type-----3 ～ 4--1 ～ 5-1 ～ 51 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 254Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 4----1 ～ 51 ～ 51 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 254Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 43 ～ 4----1 ～ 51 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 254Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type-------3 ～ 41 ～ 51 ～ 51 ～ 5-

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 254Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type-----3 ～ 4-3 ～ 41 ～ 5-1 ～ 5-

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 254Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 4--3 ～ 4-1 ～ 51 ～ 5-

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 254Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 43 ～ 4-3 ～ 4--1 ～ 5-

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 254Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type------3 ～ 4-1 ～ 51 ～ 5-1 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 254Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type-----3 ～ 43 ～ 4-1 ～ 5--1 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 254Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 4-3 ～ 4--1 ～ 5-1 ～ 5

-

1 10 Days 10Lateral Through Hole, L-Shaped HoleNot Provided25 x 254Standard Thread {PT, m (Coarse) Thread}Not Specified (Through)15Fixed Type----3 ～ 43 ～ 43 ～ 4----1 ～ 5

Loading...

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
 

Basic information

Material EN AW-5052 Equiv. Application Pneumatic

Configure

Clear all

3,446Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Shape

    • Blind Lateral Hole, Upper Hole
    • Lateral Through Hole, L-Shaped Hole

    Clear

  • Surface Treatment

    • Not Provided
    • Clear Anodized Aluminum

    Clear

  • Block Size(mm)

    • 25 x 25
    • 30 x 40
    • 50 x 50

    Clear

  • Number of Circuits(Circuits)

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8

    Clear

  • Thread Size / Type

    • G (PF) Thread
    • Standard Thread {PT, m (Coarse) Thread}

    Clear

  • Mounting Hole Change

    • NA (Through)
    • Not Specified (Front Surface Counterbore)
    • Not Specified (Through)
    • T (Tapped)
    • ZB (Back Surface Counterbore)
    • ZT (Counterbore Tapped)

    Clear

  • Pitch P(mm)

    • 15
    • 25
    • 30
    • 40

     [15-60/1mm Unit(s)]

    Clear

  • Pitch Standard / Configurable

    • Configurable Type
    • Fixed Type

    Clear

  • Drawing G Part Thread Dia. NPT Selection [G]

    • 1/4 [G2N]
    • 1/8 [G1N]

    Clear

  • Drawing K Part Thread Dia. NPT Selection [K]

    • 1/4 [K2N]
    • 1/8 [K1N]

    Clear

  • Drawing Q Part Thread Dia. NPT Selection [Q]

    • 1/4 [Q2N]
    • 1/8 [Q1N]

    Clear

  • Drawing R Part Thread Dia. NPT Selection [R]

    • 1/4 [R2N]
    • 1/8 [R1N]

    Clear

  • Select a value for M Thread (Coarse) Dia. on G (in Drawing). [GM] 3(M3) 4(M4)

    • 3
    • 4

    Clear

  • Select a value for M Thread (Coarse) Dia. on K (in Drawing). [KM] 3(M3) 4(M4)

    • 3
    • 4

    Clear

  • Select a value for M Thread (Coarse) Dia. on Q (in Drawing). [QM] 3(M3) 4(M4)

    • 3
    • 4

    Clear

  • Select a value for M Thread (Coarse) Dia. on R (in Drawing). [RM] 3(M3) 4(M4)

    • 3
    • 4

    Clear

  • Select a value for PT/PF, M Thread (Coarse) Dia. on G (in Drawing). [G] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)

    • 1
    • 2
    • 3
    • 4
    • 5

    Clear

  • Select a value for PT/PF, M Thread (Coarse) Dia. on K (in Drawing). [K] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)

    • 1
    • 2
    • 3
    • 4
    • 5

    Clear

  • Select a value for PT/PF, M Thread (Coarse) Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)

    • 1
    • 2
    • 3
    • 4
    • 5

    Clear

  • Select a value for PT/PF, M Thread (Coarse) Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)

    • 1
    • 2
    • 3
    • 4
    • 5

    Clear

  • Type

    • BMUAC
    • BMUACA
    • BMUACAP
    • BMUACP
    • BMUAF
    • BMUAFA
    • BMUAFAP
    • BMUAFP
    • BMUAL
    • BMUALA
    • BMUALAP
    • BMUALP
    • G-BMUAC
    • G-BMUACA
    • G-BMUACAP
    • G-BMUACP
    • G-BMUAF
    • G-BMUAFA
    • G-BMUAFAP
    • G-BMUAFP
    • G-BMUAL
    • G-BMUALA
    • G-BMUALAP
    • G-BMUALP

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 10 Days or Less
    • 12 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.