Configure
  • Allowable Misalignment U(mm)
  • Type
  • CAD
  • Est. shipping days
    • All
    • Within 6 working days

Floating Connectors / Flange Mounting Type

Part number:

Still undefined. 8 possible part numbers found.
Quantity:

Outline drawing and specifications table

FLCF
·M8 to M12
·M14 to M26
 [M] Material[S] Surface Treatment
Main BodySee belowSee below
Socket (Tapped)M8 to M22EN 1.0736 Equiv.Trivalent Bright Chromate
M26EN 1.1191 Equiv.
Mounting Bracket (Mounting Part)M8 to M12EN 1.0320 Equiv. (hot coiled)
Case (Mounting Part)M14 to M26EN−JL 1030 Equiv.or EN−JL 1040 Equiv.Manganese Phosphate Coating Treatment

Specification Table

Part Number
FLCF8−1.0
Part Number12tLDdAP(Q)B(C)Allowable Misalignment
U
Working Load [kgf] (N)
For Push and Pull
Mass
(kg)
TypeM-Pitch
FLCF8−1.0866336.5305.540101416.20.5Up to 60 (588)0.14
10−1.25109743.5366.5481419220.75Up to 120 (1177)0.20
12−1.5
14−1.51314125449760432326.61Up to 540 (5296)0.54
16−1.5
18−1.51524642933.50.60
22−1.52231.51578.561976553540.41.5Up to 780 (7644)1.10
26−1.5331688691190644147.3Up to 1380 (13524)1.80

Part number list

Number of items

Max. Operating Pull Compression Force

(kN)

Allowable Misalignment U

(mm)

Minimum order quantity
0.588
0.5
1 pieces
1.177
0.75
1 pieces
1.177
0.75
1 pieces
5.296
1
1 pieces
5.296
1
1 pieces
5.296
1
1 pieces
7.644
1.5
1 pieces
13.524
1.5
1 pieces
Unit price (excluding VAT)(Unit price including VAT)
Standard shipping days
77.33 €
( 92.02 € )
6 working days
78.58 €
( 93.51 € )
6 working days
79.85 €
( 95.02 € )
6 working days
96.72 €
( 115.10 € )
6 working days
98.22 €
( 116.88 € )
6 working days
99.88 €
( 118.86 € )
6 working days
118.13 €
( 140.57 € )
6 working days
162.20 €
( 193.02 € )
6 working days

More Information

Basic information

A floating connection with flange, which can be mounted with a flange.

Outline and specifications

 

·The tip inside the connector is spherical, and absorption of misalignment is possible. Shaft alignment and parallelism setting in cylinder mounting can thus be achieved merely by visual estimation.
·Due to integration of connector and holder, selecting is easy, and at the same time, number of parts is reduced.
·For Miniature Type (FLCM), screws with sizes M3 to M6 are provided for small cylinders.
·For Standard Type, three mounting variations are offered: Screw-In Type (FLCT), Flange Mounting Type (FLCF) and Bracket Mounting Type (FLCL).
■ Components
Thread Dia.Type (Mounting Method)
MiniatureM3 to M6FLCM (Screw-In)
Standard TypeM8 to M26FLCT (Screw-In), FLCF (Flange Mounting), FLCL (Bracket Mounting)
Miniature (M3 to M6)
FLCM
Part No.Part NameMaterialSurface Treatment
(1)StudEN 1.4301 Equiv.
(2)NutJIS−SWRM8Trivalent Bright Chromate
(3)CaseEN CW614N Equiv.
(4)Ball HolderEN CW614N Equiv.
(5)Ball JoinerEN CW614N Equiv.
(6)SocketEN CW614N Equiv.
(7)Thin NutJIS−SWCHTrivalent Bright Chromate
Standard Type (M8 to M26)
FLCT·FLCF·FLCL
Part No.Part NameMaterialSurface Treatment
(1)SocketEN 1.0736 Equiv.
(M26 is EN 1.1191 Equiv.)
Trivalent Bright Chromate
(2)CapEN 1.3505 Equiv.
(3)CaseEN 1.0480 Equiv.
(FLCT: M22 to M26 is EN−JL 1030 Equiv.or EN−JL 1040 Equiv.)
(FLCF/FLCL: M14 to 26 is EN−JL 1030 Equiv.or EN−JL 1040 Equiv.)
Trivalent Bright Chromate
(FLCT: M22 to M26 is Manganese Phosphate Coating)
(FLCF/FLCL: M14 to 26 is Manganese Phosphate Coating)
(4)Ball JoinerEN 1.1191 Equiv.
(5)Ball HolderEN 1.3505 Equiv.
(6)Rubber Steel Ball Retainer PlateNitrile Rubber
(7)Steel BallEN 1.3505 Equiv.
(8)Base PlateEN 1.3505 Equiv.

■ Features
·Misalignment is absorbed in three-dimensions through the ball joint swing A and misalignment motion B. (See Fig.1)
·FLCT, FLCF and FLCL have a built-in bearing, which reduces lateral load significantly and absorbs misalignment. (See Fig. 2)

■ Benefits
The following benefits are obtained by installing on the cylinder rod.
·Prevents one end of cylinder rod from getting worn out.
·Prevents breakage of the gasket, enables low pressure operation, prevents thrust drop
■ Precautions for Use
·Although the screw is rotatable, the connector cannot be used as a rotating joint.
·Non-reusable after disassembled. ·Grease filled to eliminate oiling.
·The applied load shown is static. Note that the applied load value for repeated impact load will be lower than shown.

■ App. Example