PEEK Plates
Click on this image to zoom in.
Click on this image to zoom in.
- Order quantities extended (D-JIT)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
- Technical Information
| Type | Grade | Color | Operating Ambient Temperature |
| PKA | Standard | Ash Brown | -50~250°C |
| PKAH | Sliding | Black | |
| PKCA | Electrical Conductivity | Black | Ambient Temperature ~ 250°C |
Material: PEEK
Specifications
| Part Number | - | A | - | B | - | T | |
| • Circular Sawing • Guaranteed Perpendicularity of Circular Saw Cuts • 4-side Milling etc. • 6-surface Milling etc. • Upper-lower Surface Milling etc. | PKA PKANTQ PKA4FN PKA6FMN PKA2FQ | - - - - - | 300 200.5 150.5 100.3 80 | - - - - - | 200 100.5 100.3 90.5 50 | - - - - - | 5 10 16 10.5 5 |
■ Standard Type
| Part Number | Dimension Range by Material | A | B | T | |||||||
| Type | Finish Selection | T Dimension Tolerance | A, B Dimension Tolerance | ||||||||
| PKA PKAH PKCA | (Standard) (Sliding) (Conductive Grade) | Circular Sawing | 1mm Increment | Selectable | |||||||
| - | Not available | Not available | PKA | 20~300 | 20~200 | 5, 8, 10 | |||||
| 20~250 | 20~150 | 16, 20, 25 | |||||||||
| PKAH | 20~300 | 20~200 | 5, 8, 10 | ||||||||
| PKCA | 10 | ||||||||||
| 20~250 | 20~150 | 16, 20 | |||||||||
| Guaranteed Perpendicularity of Circular Saw Cuts (NT) | 0.1mm Increment | Selectable | |||||||||
| NT | Not available | Q N M | T5, 8, 10 0~+0.3 ±0.2 -0.3~0 | T16, 20 0~+0.4 ±0.3 -0.4~0 | T25 0~+0.5 ±0.4 -0.5~0 | PKA | 20~300 | 20~200 | 5, 8, 10 | ||
| 20~250 | 20~150 | 16, 20, 25 | |||||||||
| PKAH | 20~300 | 20~200 | 5, 8, 10 | ||||||||
| PKCA | 10 | ||||||||||
| 20~250 | 20~150 | 16, 20 | |||||||||
| 4-side Milling etc. (4F) | 0.1mm Increment | Selectable | |||||||||
| 4F | Not available | Q 0~+0.2 N ±0.1 M -0.2~0 | PKA | 10~300 | 10~200 | 5, 8, 10 | |||||
| 10~250 | 10~150 | 16, 20, 25 | |||||||||
| PKAH | 10~300 | 10~200 | 5, 8, 10 | ||||||||
| PKCA | 10 | ||||||||||
| 10~250 | 10~150 | 16, 20 | |||||||||
| 6-surface Milling etc. (6F) | 0.1mm Increment | 0.1mm Increment | |||||||||
| 6F | Q 0~+0.2 N ±0.1 M -0.2~0 | Q 0~+0.2 N ±0.1 M -0.2~0 | PKA | 10~300 | 10~200 | 5~9 | |||||
| 10~250 | 10~150 | 9.1~24 | |||||||||
| PKAH | 10~300 | 10~200 | 5~9 | ||||||||
| PKCA | 10~300 | 10~200 | 9.1~10 | ||||||||
| 10~250 | 10~150 | 10.1~19 | |||||||||
| Upper-lower Surface Milling etc. (2F) | 1mm Increment | 0.1mm Increment | |||||||||
| 2F | Q 0~+0.2 N ±0.1 M -0.2~0 | Not available | PKA | 20~250 | 20~150 | 5~24 | |||||
| PKAH | 5~9 | ||||||||||
| PKCA | 9.1~19 | ||||||||||
Alterations
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
| Part Number | Minimum order quantity | Volume Discount | RoHS | Grade | Color | Finishing Method | T Dimension Tolerance | AB Dimension Tolerance | A (mm) | B (mm) | T (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 7 Days | 10 | Standard | Gray Brown | Upper-lower Surface Milled | M (0/-0.2) | - | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | ||
| 1 | 7 Days | 10 | Standard | Gray Brown | Upper-lower Surface Milled | N (±0.1) | - | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | ||
| 1 | 7 Days | 10 | Standard | Gray Brown | Upper-lower Surface Milled | Q (+0.2/0) | - | 20 ～ 250 | 20 ～ 150 | 5 ～ 39 | ||
| 1 | 7 Days | 10 | Standard | Gray Brown | 4-Side Milled | Q (+0.2/0) | M (0/-0.2) | 10 ～ 300 | 10 ～ 200 | 5 ～ 40 | ||
| 1 | 7 Days | 10 | Standard | Gray Brown | 4-Side Milled | - | N (±0.1) | 10 ～ 300 | 10 ～ 200 | 5 ～ 40 | ||
| 1 | 7 Days | 10 | Standard | Gray Brown | 4-Side Milled | - | Q (+0.2/0) | 10 ～ 300 | 10 ～ 200 | 5 ～ 40 | ||
| 1 | 7 Days | 10 | Standard | Gray Brown | 6-surface Milled | M (0/-0.2) | M (0/-0.2) | 10 ～ 300 | 10 ～ 200 | 5 ～ 39 | ||
| 1 | 7 Days | 10 | Standard | Gray Brown | 6-surface Milled | M (0/-0.2) | N (±0.1) | 10 ～ 300 | 10 ～ 200 | 5 ～ 39 | ||
| 1 | 7 Days | 10 | Standard | Gray Brown | 6-surface Milled | M (0/-0.2) | Q (+0.2/0) | 10 ～ 300 | 10 ～ 200 | 5 ～ 39 | ||
| 1 | 7 Days | 10 | Standard | Gray Brown | 6-surface Milled | N (±0.1) | M (0/-0.2) | 10 ～ 300 | 10 ～ 200 | 5 ～ 39 | ||
| 1 | 7 Days | 10 | Standard | Gray Brown | 6-surface Milled | N (±0.1) | N (±0.1) | 10 ～ 300 | 10 ～ 200 | 5 ～ 39 | ||
| 1 | 7 Days | 10 | Standard | Gray Brown | 6-surface Milled | N (±0.1) | Q (+0.2/0) | 10 ～ 300 | 10 ～ 200 | 5 ～ 39 | ||
| 1 | 7 Days | 10 | Standard | Gray Brown | 6-surface Milled | Q (+0.2/0) | M (0/-0.2) | 10 ～ 300 | 10 ～ 200 | 5 ～ 39 | ||
| 1 | 7 Days | 10 | Standard | Gray Brown | 6-surface Milled | Q (+0.2/0) | N (±0.1) | 10 ～ 300 | 10 ～ 200 | 5 ～ 39 | ||
| 1 | 7 Days | 10 | Standard | Gray Brown | 6-surface Milled | Q (+0.2/0) | Q (+0.2/0) | 10 ～ 300 | 10 ～ 200 | 5 ～ 39 | ||
| 1 | 5 Days | 10 | Standard | Gray Brown | Circular Sawing | - | - | 20 ～ 500 | 20 ～ 400 | 10 ～ 30 | ||
| 1 | 7 Days | 10 | Sliding | Black | Upper-lower Surface Milled | M (0/-0.2) | - | 20 ～ 250 | 20 ～ 150 | 5 ～ 9 | ||
| 1 | 7 Days | 10 | Sliding | Black | Upper-lower Surface Milled | N (±0.1) | - | 20 ～ 250 | 20 ～ 150 | 5 ～ 9 | ||
| 1 | 7 Days | 10 | Sliding | Black | Upper-lower Surface Milled | Q (+0.2/0) | - | 20 ～ 250 | 20 ～ 150 | 5 ～ 9 | ||
| 1 | 7 Days | 10 | Sliding | Black | 4-Side Milled | - | M (0/-0.2) | 10 ～ 300 | 10 ～ 200 | 5 ～ 10 | ||
| 1 | 7 Days | 10 | Sliding | Black | 4-Side Milled | - | N (±0.1) | 10 ～ 300 | 10 ～ 200 | 5 ～ 10 | ||
| 1 | 7 Days | 10 | Sliding | Black | 4-Side Milled | - | Q (+0.2/0) | 10 ～ 300 | 10 ～ 200 | 5 ～ 10 | ||
| 1 | 7 Days | 10 | Sliding | Black | 6-surface Milled | M (0/-0.2) | M (0/-0.2) | 10 ～ 300 | 10 ～ 200 | 5 ～ 9 | ||
| 1 | 7 Days | 10 | Sliding | Black | 6-surface Milled | M (0/-0.2) | N (±0.1) | 10 ～ 300 | 10 ～ 200 | 5 ～ 9 | ||
| 1 | 7 Days | 10 | Sliding | Black | 6-surface Milled | M (0/-0.2) | Q (+0.2/0) | 10 ～ 300 | 10 ～ 200 | 5 ～ 9 | ||
| 1 | 7 Days | 10 | Sliding | Black | 6-surface Milled | N (±0.1) | M (0/-0.2) | 10 ～ 300 | 10 ～ 200 | 5 ～ 9 | ||
| 1 | 7 Days | 10 | Sliding | Black | 6-surface Milled | N (±0.1) | N (±0.1) | 10 ～ 300 | 10 ～ 200 | 5 ～ 9 | ||
| 1 | 7 Days | 10 | Sliding | Black | 6-surface Milled | N (±0.1) | Q (+0.2/0) | 10 ～ 300 | 10 ～ 200 | 5 ～ 9 | ||
| 1 | 7 Days | 10 | Sliding | Black | 6-surface Milled | Q (+0.2/0) | M (0/-0.2) | 10 ～ 300 | 10 ～ 200 | 5 ～ 9 | ||
| 1 | 7 Days | 10 | Sliding | Black | 6-surface Milled | Q (+0.2/0) | N (±0.1) | 10 ～ 300 | 10 ～ 200 | 5 ～ 9 | ||
| 1 | 7 Days | 10 | Sliding | Black | 6-surface Milled | Q (+0.2/0) | Q (+0.2/0) | 10 ～ 300 | 10 ～ 200 | 5 ～ 9 | ||
| 1 | 5 Days | 10 | Sliding | Black | Circular Sawing | - | - | 20 ～ 300 | 20 ～ 200 | 5 ～ 10 | ||
| 1 | 5 Days | 10 | Sliding | Black | Guaranteed Perpendicularity of Circular Sawing | - | - | 20 ～ 300 | 20 ～ 200 | 5 ～ 10 | ||
| 1 | 5 Days | 10 | Sliding | Black | Guaranteed Perpendicularity of Circular Sawing | - | - | 20 ～ 300 | 20 ～ 200 | 5 ～ 10 | ||
| 1 | 5 Days | 10 | Sliding | Black | Guaranteed Perpendicularity of Circular Sawing | - | - | 20 ～ 300 | 20 ～ 200 | 5 ～ 10 | ||
| 1 | 5 Days | 10 | Standard | Gray Brown | Guaranteed Perpendicularity of Circular Sawing | - | - | 20 ～ 300 | 20 ～ 200 | 5 ～ 40 | ||
| 1 | 5 Days | 10 | Standard | Gray Brown | Guaranteed Perpendicularity of Circular Sawing | - | - | 20 ～ 300 | 20 ～ 200 | 5 ～ 40 | ||
| 1 | 5 Days | 10 | Standard | Gray Brown | Guaranteed Perpendicularity of Circular Sawing | - | - | 20 ～ 300 | 20 ～ 200 | 5 ～ 40 | ||
| 1 | 7 Days | 10 | Conductive | Black | Upper-lower Surface Milled | M (0/-0.2) | - | 20 ～ 250 | 20 ～ 150 | 9.1 ～ 19 | ||
| 1 | 7 Days | 10 | Conductive | Black | Upper-lower Surface Milled | N (±0.1) | - | 20 ～ 250 | 20 ～ 150 | 9.1 ～ 19 | ||
| 1 | 7 Days | 10 | Conductive | Black | Upper-lower Surface Milled | Q (+0.2/0) | - | 20 ～ 250 | 20 ～ 150 | 9.1 ～ 19 | ||
| 1 | 7 Days | 10 | Conductive | Black | 4-Side Milled | - | M (0/-0.2) | 10 ～ 300 | 10 ～ 200 | 10 ～ 20 | ||
| 1 | 7 Days | 10 | Conductive | Black | 4-Side Milled | - | N (±0.1) | 10 ～ 300 | 10 ～ 200 | 10 ～ 20 | ||
| 1 | 7 Days | 10 | Conductive | Black | 4-Side Milled | - | Q (+0.2/0) | 10 ～ 300 | 10 ～ 200 | 10 ～ 20 | ||
| 1 | 7 Days | 10 | Conductive | Black | 6-surface Milled | M (0/-0.2) | M (0/-0.2) | 10 ～ 300 | 10 ～ 200 | 9.1 ～ 19 | ||
| 1 | 7 Days | 10 | Conductive | Black | 6-surface Milled | M (0/-0.2) | N (±0.1) | 10 ～ 300 | 10 ～ 200 | 9.1 ～ 19 | ||
| 1 | 7 Days | 10 | Conductive | Black | 6-surface Milled | M (0/-0.2) | Q (+0.2/0) | 10 ～ 300 | 10 ～ 200 | 9.1 ～ 19 | ||
| 1 | 7 Days | 10 | Conductive | Black | 6-surface Milled | N (±0.1) | M (0/-0.2) | 10 ～ 300 | 10 ～ 200 | 9.1 ～ 19 | ||
| 1 | 7 Days | 10 | Conductive | Black | 6-surface Milled | N (±0.1) | N (±0.1) | 10 ～ 300 | 10 ～ 200 | 9.1 ～ 19 | ||
| 1 | 7 Days | 10 | Conductive | Black | 6-surface Milled | N (±0.1) | Q (+0.2/0) | 10 ～ 300 | 10 ～ 200 | 9.1 ～ 19 | ||
| 1 | 7 Days | 10 | Conductive | Black | 6-surface Milled | Q (+0.2/0) | M (0/-0.2) | 10 ～ 300 | 10 ～ 200 | 9.1 ～ 19 | ||
| 1 | 7 Days | 10 | Conductive | Black | 6-surface Milled | Q (+0.2/0) | N (±0.1) | 10 ～ 300 | 10 ～ 200 | 9.1 ～ 19 | ||
| 1 | 7 Days | 10 | Conductive | Black | 6-surface Milled | Q (+0.2/0) | Q (+0.2/0) | 10 ～ 300 | 10 ～ 200 | 9.1 ～ 19 | ||
| 1 | 5 Days | 10 | Conductive | Black | Circular Sawing | - | - | 20 ～ 300 | 20 ～ 200 | 10 ～ 20 |
Loading...
Basic information
| Material | PEEK | Hole Processing | No Drilling Alteration | Material Name | PEEK |
|---|
Configure
Basic Attributes
-
Grade
- Standard
- Conductive
- Sliding
-
Color
- Black
- Gray Brown
-
Finishing Method
- 4-Side Milled
- 6-surface Milled
- Circular Sawing
- Guaranteed Perpendicularity of Circular Sawing
- Upper-lower Surface Milled
-
T Dimension Tolerance
- M (0/-0.2)
- N (±0.1)
- Q (+0.2/0)
-
AB Dimension Tolerance
- M (0/-0.2)
- N (±0.1)
- Q (+0.2/0)
-
A(mm)
-
B(mm)
-
T(mm)
-
Type
- PKA
- PKA2F□
- PKA4F□
- PKA6F□□
- PKAH
- PKAH2F□
- PKAH4F□
- PKAH6F□□
- PKAHNT□
- PKANT□
- PKCA
- PKCA2F□
- PKCA4F□
- PKCA6F□□
-
Filter by CAD data type
- 2D
- 3D
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.