- With or w/o Adhesive
- Thickness T(mm)
- 0.5
- 1
- 2
- 3
- 5
- 10
- 15
- 20
- 30
- Width A(mm)
- 3
- 5
- 10
- 20
- 30
- 40
- 50
- 80
- 100
- 300
- 500
[10-1000/1mm units] - Length B(mm)
- 300
- 500
[10-1000/1mm units] - Counterbored Hole Nominal Dia. [Z]
- 3
- 4
- 5
- 6
- 8
- 10
- F(mm)[5-495/0.5mm units]
- G(mm)[5-495/0.5mm units]
- Through Hole Nominal Dia. [N]
- 3
- 4
- 5
- 6
- 8
- 10
- CAD
- 2D
- 3D
Plates / FPM / A60, A70, A80 / through holes, counterbores / adhesive layer (Part number list: 3 page)
Part number:
possible part numbers found.Outline drawing and specifications table
Dimensional Drawing
| ■A, B Configurable -Standard- | ■ Accuracy Standards T Tolerance | A, B Tolerance | ||||||||||||||||||||||
 |
|
|
-Hole Type-
| Hole Machining Details | |||||||||||||||||||||||||||||
 N (Through Hole) Z (Counterbored Hole) |
| ||||||||||||||||||||||||||||
Product Specifications
| A Selectable Type | A, B Configurable | [M] Material | [H] Hardness | Color | ||
| No Adhesive | Adhesive | No Adhesive | Adhesive | |||
| RBFM | RBFMA | RBFMF | RBFMFA | Fluororubber (FPM) | Shore A80 | Black |
| RBLM | RBLMA | RBLMF | RBLMFA | Fluororubber (FPM) | Shore A60 | Black |
| RBFW | RBFWA | RBFWF | RBFWFA | Fluororubber (FPM) | Shore A70 | White |
[ ! ]Temperature limit for seals is 120°C.
Characteristic Values of Fluororubber
Item | Unit | Fluororubber | |
(FPM) | |||
Hardness | Shore A | 80 | 60 |
Specific Gravity | - | 1.8 | 1.9 |
Tensile Strength* | Mpa | 12.5 | 10.8 |
Elongation | % | 330 | 270 |
Volume Resistivity* | (Ω·cm) | 106 or less | 1011 or less |
Maximum Operating Temperature | °C | 230 | 230 |
Temperature of Continuous Use | °C | 210 | 210 |
Low Temp. Resistance | °C | -10 | -10 |
* Volume resistivity is tested based on the JIS standard K6271-1.
* The characteristic values of tensile strength and elongation
are tested based on the JIS standard K6251.
Specification Table
| Part Number | — | A |
| RBFM5 | — | 100 |
| Part Number | — | A | — | B | — | F | — | G | — | Screw Nominal Dia. |
| RBFMF10 | — | 110 | — | 65 | ||||||
| RBFMF4H20 | — | 200 | — | 150 | — | F140 | — | G100 | — | Z5 |
| Part Number | A Selection | ||
| Type | T | ||
| No Adhesive RBFM RBLM RBFW | Adhesive RBFMA RBLMA RBFWA | 0.5 | 300 500 RBFM·RBFMA Only 300 is available for T15 or more of RBFM and RBFMA. 300 only |
| 1 | |||
| 2 | |||
| 3 | |||
| 5 | |||
| 10 | |||
| 15 | |||
| (For exceptions in T dimensions, see below.) | 20 | ||
| 30 | |||
[ ! ] For RBFW and RBFWA, only T = 1, 2, 3, 5 are available
■Band Type
| Part Number | A Selection | ||
| Type | T | ||
| No Adhesive RBFM RBLM RBFW | Adhesive RBFMA RBLMA RBFWA | 0.5 | 3 5 10 20 30 40 50 80 100 |
| 1 | |||
| 2 | |||
| 3 | |||
| (For exceptions in T dimensions, see below.) | 5 | ||
| 10 | |||
■A, B Configurable - Standard Type
| Part Number | 1 mm Increments | |||
| Type | T | A | B | |
| No Adhesive RBFMF RBLMF RBFWF | Adhesive RBFMFA RBLMFA RBFWFA | 0.5 | 10 to 1000 RBFMF· RBFMFA10 to 300 is available for T15 or more of RBFMF and RBFMFA. | 10 to 1000 RBFMF· RBFMFA10 to 300 is available for T15 or more of RBFMF and RBFMFA. |
| 1 | ||||
| 2 | ||||
| 3 | ||||
| 5 | ||||
| 10 | ||||
| 15 | ||||
| (For exceptions in T dimensions, see below.) | 20 | |||
| 30 | ||||
[ ! ] For RBLMF and RBLMFA, T = 15, 20, 30 are not available
[ ! ] For RBFWF and RBFWFA, only T = 1, 2, 3, 5 are available
[ ! ]For A and B dimensions of 501 or more, the T dimension is up to 10.
■A, B Configurable - Hole Type
| Part Number | 1 mm Increments (A ≥ B ≥ T) | 0.5 mm Increments | Screw Nominal Dia. Selection | |||||||||||
| Type | Nominal | T | A | B | F | G | N (Through Hole) | Z (Counterbored Hole) | ||||||
| No Adhesive RBFMF RBLMF RBFWF | Adhesive RBFMFA RBLMFA RBFWFA | 1H 2H 3H 4H 6H | 0.5 | 10 to 500 | 10 to 500 | 5 to 495 (1H Type) 9 to 491 (2H, 4H Type) 9 to 245 (3H, 6H Type) | 5 to 495 (1H, 2H, 3H Type) 9 to 491 (4H, 6H Type) | 3 4 5 6 8 10 | — | |||||
| 1 | — | |||||||||||||
| 2 | — | |||||||||||||
| 3 | — | |||||||||||||
| 5 | — | |||||||||||||
| 10 | 3 | 4 | ||||||||||||
| 15 | 9 to 291 (1H, 2H, 4H Type) 9 to 145 (3H, 6H Type) | 5 to 295 (1H, 2H, 3H Type) 9 to 291 (4H, 6H Type) | 4 | 5 | 6 | 8 | ||||||||
| (For exceptions in T dimensions, see below.) | 20 | 4 | 5 | 6 | 8 | |||||||||
| 30 | 4 | 5 | 6 | 8 | 10 | |||||||||
[ ! ] For RBFWF and RBFWFA, only T = 1, 2, 3, 5 are available
[ ! ]A ≥ B ≥ T
[!]Dimension F Specification Range – 1H type selection: d (d1)/2 + 2.5 ≤ F ≤ A - d (d1)/2 - 2.5, when selecting 2H/4H Type: d (d1) + 5 ≤ F ≤ A - d (d1) - 5, 3H or 6H type selected: d (d1) + 5 ≤ F ≤ A/2−d (d1)/2−2.5 is required.
[!]Dimension G Specification Range – 1H/2H/3H type selection: d (d1)/2 + 2.5 ≤ G ≤ B - d (d1)/2 - 2.5, when selecting 4H/6H Type: d (d1) + 5 ≤ G ≤ B−d (d1)−5 is required. (d for through holes, d1 for counterbored holes.)
Alterations
| Alterations Code | Alteration Details | Applicable Conditions | Alteration Examples | |
| XC | Hole Position From Left | XC = 1 mm Increments | [ ! ]5 ≤ XC ≤ 486 " ! " (2H, 4H Type): d (d1)/2 + 2.5 ≤ XC ≤ A - F - d (d1)/2 - 2.5 " ! " (3H, 6H Type): d (d1)/2 + 2.5 ≤ XC ≤ A - 2F - d (d1)/2 - 2.5 | RBFMF4H10-200-150-F120-G100-N5-XC55 |
| YC | Hole Position From Bottom | YC = 1 mm Increments | [ ! ]5 ≤ YC ≤ 486 [ ! ] d (d1)/2 + 2.5 ≤ YC ≤ B - G - d (d1)/2 - 2.5 | RBFMF4H15-100-80-F60-G20-Z5-YC40 |
| CCA CCB CCC CCD | Corner Cut | Any corner can be cut. 5 ≤ corner cut ≤ 10 (1 mm Increments) [Ordering Code] Example: When A and D are cut with C5 >> CCA5-CCD5 | [ ! ]50 ≤ A/B [ ! ] For Adhesive Type, please specify with the adhesive side facing down. [NG]Applicable to A, B Dimension Configurable Type only [NG]T15, 20, and 30 are not selectable. [NG]A/B dimensions of 501 or higher are not selectable. [NG]Hole Type is not selectable. | RBFMF10-300-200-CCA5-CCC5 |
| KT2 | Adhesive Type Change | Changes to oil-resistant adhesives. [Ordering Code]: KT2 | [ ! ]Not available for No Adhesive Type [ ! ]Only available for T = 1, 2, 3 [ ! ]Band Type A = 3 or 5 is not selectable [ ! ] Not available for RBFWA and RBFWFA | RBFMA2-250-150-KT2 |
Part number list
| Part number |
|---|
Unit price (excluding VAT)(Unit price including VAT) | Standard shipping days |
|---|
79.57 € ( 94.69 € ) | 7 working days |
99.16 € ( 118.00 € ) | 6 working days |
162.63 € ( 193.53 € ) | 6 working days |
444.62 € ( 529.10 € ) | 6 working days |
8.04 € ( 9.57 € ) | 7 working days |
12.50 € ( 14.88 € ) | 6 working days |
23.44 € ( 27.89 € ) | 6 working days |
45.43 € ( 54.06 € ) | 6 working days |
67.90 € ( 80.80 € ) | 7 working days |
89.19 € ( 106.14 € ) | 7 working days |
103.72 € ( 123.43 € ) | 6 working days |
156.61 € ( 186.37 € ) | 7 working days |
164.31 € ( 195.53 € ) | 7 working days |
306.74 € ( 365.02 € ) | 7 working days |
655.33 € ( 779.84 € ) | 7 working days |
419.26 € ( 498.92 € ) | 7 working days |
502.78 € ( 598.31 € ) | 6 working days |
647.40 € ( 770.41 € ) | 7 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
- ( - ) | 6 working days |
More Information
Basic information
Caution
- Similar products are RBLM/RBLMA/RBLMF/RBLMFA listed on P. 2-429 of our catalog. Please check the difference in specifications.
Outline and specifications
General Information - Panels (polyurethane rubber, rubber, foam, felt)
_-_Sortiment.jpg)
Selection details of panels (polyurethane rubber, rubber, foam, felt)
- Material: polyurethane rubber (PU/PUR), heat-resistant polyurethane rubber, low-impact polyurethane rubber, abrasion-resistant polyurethane rubber, antistatic polyurethane, nitrile (NBR), chloroprene rubber (CR), polyethylene (EPDM), silicone (SI), fluorine (FPM), butyl rubber (IIR), natural rubber (NR), hard rubber, special synthetic rubber, polyurethane foam, head-insulating foam, polyethylene foam, low-rebound foam
- Thickness (mm): 0.5 to 50
- Width (mm): 3 to 500
- Length (mm): 10 to 2000
Description/Basics
Foam plates and rubber plates are provided for damping or for sound proofing. MISUMI offers these in various Shore hardening for a wide variety of tasks. Due to the variety of materials, different resistances to environmental influences are possible depending on the application. The foam plates reduce sound in machines and can reduce the sound emissions of a system. For more information on foam characteristics, follow this link.
Rubber plates or foam plates are also suitable in conveyor systems to absorb components to be transported at a dampened level or to protect them from damage as a lateral guide when the components bump into each other. Hard rubber panels or low-impact rubber or foam panels reduce the impact energy of the components. These minimize and lower the vibrations in an application.
In addition, MISUMI offers highly abrasion-resistant polyurethane (Vulkollan), which has an abrasion resistance that is six times higher than with conventional polyurethane.
Ceramic polyurethane plates contain ceramic particles. After machining, these can have a smooth surface despite low Shore hardness.
The polyurethane rubber plates are also available antistatically. The specific resistance of antistatic polyurethane plates prevents static charging. This prevents any damage to electronic components.
For applications with higher temperatures, MISUMI offers heat-resistant polyurethane rubber, which can withstand a temperature range of up to approx. ~120°C (see the product specifications for exact information).
MISUMI also offers low-friction and anti-friction rubber plates. Low-friction rubber plates are often used in the gentle component guide for belt conveyors and roller conveyors.
Felt plates have the property of absorbing or dispensing oil and other liquids via the capillary effect. This property can be used to remove, for example, excess oil on a belt conveyor.
In addition, MISUMI offers rubber plates and foam plates that are self-adhesive for simplified assembly. Furthermore, you will find double-adhesive tape for attaching rubber plates and foam plates.
Additional properties on foam panels and rubber plates can be found in the Properties PDF.
MISUMI also offers these products in a round shape as discs and sleeves made of rubber, natural rubber, foam and felt.
Application Examples - Panels (polyurethane rubber, rubber, foam, felt)
Application example
(1) Low-friction rubber plate (2) belt conveyor
Application example
(1) Vibration damping plate
Industrial Applications
