- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 21/4/2024 to 0:00 (CET) 22/4/2024. We apologize for the inconvenience.
Locating pins / round / rounded flat head / slotted / fixing option selectable
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Material | Hardness | B Fixed | B Configurable | |||
| Press Fit | Tapped, Flathead Slot | Press Fit | Tapped | |||
| Without Flathead Slot | Flathead Slot | |||||
| EN 1.2510 Equiv. | Treated Hardness: 60 ~ 63HRC | HPST | HPSTM | HPSF | HPSFS | HPSFM |
| EN 1.4301 Equiv. | - | SHPST | SHPSTM | SHPSF | - | SHPSFM |
| EN 1.4037 Equiv. | Treated Hardness: 50 ~ 55HRC | CHPST | CHPSTM | CHPSF | CHPSFS | CHPSFM |
Specifications
| Part Number | - | L | - | P | - | B |
| HPST5 HPSF4 | - - | 15 10 | - - | P7.20 P5.05 | - | B1.20 |
■B Fixed, Standard, Tapped
■B Configurable, Press Fit
■B Configurable, Tapped
* The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on >>P. 2297.) Not applicable when using locking materials or lock washers.
| Part Number | L Selection | P 0.01mm Increment | B | E | ℓ | M (Coarse) | * Tightening Torque N • cm | Unit Price | ||||||||||
| Type | D | D dim. Tolerance | HPST | SHPST | CHPST | HPSTM | SHPSTM | CHPSTM | ||||||||||
| Standard HPST SHPST CHPST | Tapped Flathead Slot HPSTM SHPSTM CHPSTM Applicable when D≥5. | 1 | +0.012 +0.007 | 12 | 1.50~3.00 | 1 | 3 | 3 | - | - | - | - | - | |||||
| 2 | 12 | 2.50~4.00 | 4 | - | - | - | ||||||||||||
| 3 | 12 | 15 | 4.00~6.00 | 2 | - | - | - | |||||||||||
| 4 | 12 | 15 | 5.00~7.00 | 5 | - | - | - | |||||||||||
| 5 | 12 | 15 | 6.00~8.00 | M3 | 98 | |||||||||||||
| 6 | 12 | 15 | 7.00~9.00 | 6 | ||||||||||||||
| 8 | 15 | 18 | 9.00~13.00 | 3 | M4 | 225 | ||||||||||||
| 10 | 15 | 18 | 11.00~15.00 | M5 | 461 | |||||||||||||
■B Configurable, Press Fit
| Part Number | L Selection | P 0.01mm Increment | B 0.01mm Increment | E | ℓ | Unit Price | ||||||||||||
| Type | D | D dim. Tolerance | HPSF | SHPSF | CHPSF | |||||||||||||
| HPSF SHPSF CHPSF | 1 | +0.012 +0.007 | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 1.50~3.00 | 1.00~5.00 | 3 | 1 | |||||
| 2 | 4 | 5 | 6 | 8 | 10 | 12 | 2.50~4.00 | 1.00~10.00 | 4 | |||||||||
| 3 | 5 | 6 | 8 | 10 | 12 | 15 | 4.00~6.00 | 1.00~10.00 | ||||||||||
| 4 | 5 | 6 | 8 | 10 | 12 | 15 | 5.00~7.00 | 1.00~10.00 | 5 | |||||||||
| 5 | 5 | 6 | 8 | 10 | 12 | 15 | 6.00~8.00 | 1.00~10.00 | ||||||||||
| 6 | 6 | 8 | 10 | 12 | 15 | 7.00~10.00 | 1.00~12.00 | 6 | ||||||||||
| 8 | 8 | 10 | 12 | 15 | 9.00~13.00 | 1.00~15.00 | ||||||||||||
| 10 | 10 | 12 | 15 | 18 | 11.00~15.00 | 1.00~20.00 | ||||||||||||
■B Configurable, Tapped
| Part Number | L Selection | P 0.01mm Increment | B 0.01mm Increment | E | M (Coarse) | * Tightening Torque N • cm | Unit Price | ||||||||||||
| Type | D | D dim. Tolerance g6 | HPSFS | CHPSFS | HPSFM | SHPSFM | CHPSFM | ||||||||||||
| Without Flathead Slot HPSFS CHPSFS | Flathead Slot HPSFM SHPSFM CHPSFM | 5 | -0.004 -0.012 | 6 | 8 | 10 | 12 | 15 | 6.00~8.00 | 1.00~10.00 | 5 | M3 | 98 | ||||||
| 6 | 6 | 8 | 10 | 12 | 15 | 7.00~10.00 | 1.00~12.00 | 6 | |||||||||||
| 8 | -0.005 -0.014 | 8 | 10 | 12 | 15 | 18 | 9.00~13.00 | 1.00~15.00 | M4 | 225 | |||||||||
| 10 | 10 | 12 | 15 | 18 | 11.00~15.00 | 1.00~20.00 | M5 | 461 | |||||||||||
Alterations
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
Part Number
|
|---|
| CHPSF1-[3,4,5,6,8,10,12]-P[1.5-3/0.01]-B[1-5/0.01] |
| CHPSF2-[4,5,6,8,10,12]-P[2.5-4/0.01]-B[1-10/0.01] |
| CHPSF3-[5,6,8,10,12,15]-P[4-6/0.01]-B[1-10/0.01] |
| CHPSF4-[5,6,8,10,12,15]-P[5-7/0.01]-B[1-10/0.01] |
| CHPSF5-[5,6,8,10,12,15]-P[6-8/0.01]-B[1-10/0.01] |
| CHPSF6-[6,8,10,12,15]-P[7-10/0.01]-B[1-12/0.01] |
| CHPSF8-[8,10,12,15]-P[9-13/0.01]-B[1-15/0.01] |
| CHPSF10-[10,12,15,18]-P[11-15/0.01]-B[1-20/0.01] |
| CHPSFM5-[6,8,10,12,15]-P[6-8/0.01]-B[1-10/0.01] |
| CHPSFM6-[6,8,10,12,15]-P[7-10/0.01]-B[1-12/0.01] |
| CHPSFM8-[8,10,12,15,18]-P[9-13/0.01]-B[1-15/0.01] |
| CHPSFM10-[10,12,15,18]-P[11-15/0.01]-B[1-20/0.01] |
| CHPSFS5-[6,8,10,12,15]-P[6-8/0.01]-B[1-10/0.01] |
| CHPSFS6-[6,8,10,12,15]-P[7-10/0.01]-B[1-12/0.01] |
| CHPSFS8-[8,10,12,15,18]-P[9-13/0.01]-B[1-15/0.01] |
| CHPSFS10-[10,12,15,18]-P[11-15/0.01]-B[1-20/0.01] |
| CHPST1-12-P[1.5-3/0.01] |
| CHPST2-12-P[2.5-4/0.01] |
| CHPST3-[12,15]-P[4-6/0.01] |
| CHPST4-[12,15]-P[5-7/0.01] |
| CHPST5-[12,15]-P[6-8/0.01] |
| CHPST6-[12,15]-P[7-9/0.01] |
| CHPST8-[15,18]-P[9-13/0.01] |
| CHPST10-[15,18]-P[11-15/0.01] |
| CHPSTM5-[12,15]-P[6-8/0.01] |
| CHPSTM6-[12,15]-P[7-9/0.01] |
| CHPSTM8-[15,18]-P[9-13/0.01] |
| CHPSTM10-[15,18]-P[11-15/0.01] |
| HPSF1-[3,4,5,6,8,10,12]-P[1.5-3/0.01]-B[1-5/0.01] |
| HPSF2-[4,5,6,8,10,12]-P[2.5-4/0.01]-B[1-10/0.01] |
| HPSF3-[5,6,8,10,12,15]-P[4-6/0.01]-B[1-10/0.01] |
| HPSF4-[5,6,8,10,12,15]-P[5-7/0.01]-B[1-10/0.01] |
| HPSF5-[5,6,8,10,12,15]-P[6-8/0.01]-B[1-10/0.01] |
| HPSF6-[6,8,10,12,15]-P[7-10/0.01]-B[1-12/0.01] |
| HPSF8-[8,10,12,15]-P[9-13/0.01]-B[1-15/0.01] |
| HPSF10-[10,12,15,18]-P[11-15/0.01]-B[1-20/0.01] |
| HPSFM5-[6,8,10,12,15]-P[6-8/0.01]-B[1-10/0.01] |
| HPSFM6-[6,8,10,12,15]-P[7-10/0.01]-B[1-12/0.01] |
| HPSFM8-[8,10,12,15,18]-P[9-13/0.01]-B[1-15/0.01] |
| HPSFM10-[10,12,15,18]-P[11-15/0.01]-B[1-20/0.01] |
| HPSFS5-[6,8,10,12,15]-P[6-8/0.01]-B[1-10/0.01] |
| HPSFS6-[6,8,10,12,15]-P[7-10/0.01]-B[1-12/0.01] |
| HPSFS8-[8,10,12,15,18]-P[9-13/0.01]-B[1-15/0.01] |
| HPSFS10-[10,12,15,18]-P[11-15/0.01]-B[1-20/0.01] |
| HPST1-12-P[1.5-3/0.01] |
| HPST2-12-P[2.5-4/0.01] |
| HPST3-[12,15]-P[4-6/0.01] |
| HPST4-[12,15]-P[5-7/0.01] |
| HPST5-[12,15]-P[6-8/0.01] |
| HPST6-[12,15]-P[7-9/0.01] |
| HPST8-[15,18]-P[9-13/0.01] |
| HPST10-[15,18]-P[11-15/0.01] |
| HPSTM5-[12,15]-P[6-8/0.01] |
| HPSTM6-[12,15]-P[7-9/0.01] |
| HPSTM8-[15,18]-P[9-13/0.01] |
| HPSTM10-[15,18]-P[11-15/0.01] |
| SHPSF1-[3,4,5,6,8,10,12]-P[1.5-3/0.01]-B[1-5/0.01] |
| SHPSF2-[4,5,6,8,10,12]-P[2.5-4/0.01]-B[1-10/0.01] |
| SHPSF3-[5,6,8,10,12,15]-P[4-6/0.01]-B[1-10/0.01] |
| SHPSF4-[5,6,8,10,12,15]-P[5-7/0.01]-B[1-10/0.01] |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Inlet Style | Mounting Side Shape | Heat Treatment | Material | Steel Type | Stainless Steel Type | Locating Section Outer Dia. P (Ø) | Mounting Side Dia. D (Ø) | Mounting Side Outer Dia. Tolerance | Positioning Part Length B (mm) | L (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Stainless Steel | - | EN 1.4037 Equiv. | 1.5 ～ 3 | 1 | 0.012/0.007 | 1 ～ 5 | 3 ～ 12 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Stainless Steel | - | EN 1.4037 Equiv. | 2.5 ～ 4 | 2 | 0.012/0.007 | 1 ～ 10 | 4 ～ 12 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Stainless Steel | - | EN 1.4037 Equiv. | 4 ～ 6 | 3 | 0.012/0.007 | 1 ～ 10 | 5 ～ 15 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Stainless Steel | - | EN 1.4037 Equiv. | 5 ～ 7 | 4 | 0.012/0.007 | 1 ～ 10 | 5 ～ 15 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Stainless Steel | - | EN 1.4037 Equiv. | 6 ～ 8 | 5 | 0.012/0.007 | 1 ～ 10 | 5 ～ 15 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Stainless Steel | - | EN 1.4037 Equiv. | 7 ～ 10 | 6 | 0.012/0.007 | 1 ～ 12 | 6 ～ 15 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Stainless Steel | - | EN 1.4037 Equiv. | 9 ～ 13 | 8 | 0.012/0.007 | 1 ～ 15 | 8 ～ 15 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Stainless Steel | - | EN 1.4037 Equiv. | 11 ～ 15 | 10 | 0.012/0.007 | 1 ～ 20 | 10 ～ 18 | ||
- | 1 | 7 Days | 10 | Flathead Slot | Female Thread | Directly Quenched | Stainless Steel | - | EN 1.4037 Equiv. | 6 ～ 8 | 5 | g6 | 1 ～ 10 | 6 ～ 15 | ||
- | 1 | 7 Days | 10 | Flathead Slot | Female Thread | Directly Quenched | Stainless Steel | - | EN 1.4037 Equiv. | 7 ～ 10 | 6 | g6 | 1 ～ 12 | 6 ～ 15 | ||
- | 1 | 7 Days | 10 | Flathead Slot | Female Thread | Directly Quenched | Stainless Steel | - | EN 1.4037 Equiv. | 9 ～ 13 | 8 | g6 | 1 ～ 15 | 8 ～ 18 | ||
- | 1 | 7 Days | 10 | Flathead Slot | Female Thread | Directly Quenched | Stainless Steel | - | EN 1.4037 Equiv. | 11 ～ 15 | 10 | g6 | 1 ～ 20 | 10 ～ 18 | ||
- | 1 | 7 Days | 10 | No | Female Thread | Directly Quenched | Stainless Steel | - | EN 1.4037 Equiv. | 6 ～ 8 | 5 | g6 | 1 ～ 10 | 6 ～ 15 | ||
- | 1 | 7 Days | 10 | No | Female Thread | Directly Quenched | Stainless Steel | - | EN 1.4037 Equiv. | 7 ～ 10 | 6 | g6 | 1 ～ 12 | 6 ～ 15 | ||
- | 1 | 7 Days | 10 | No | Female Thread | Directly Quenched | Stainless Steel | - | EN 1.4037 Equiv. | 9 ～ 13 | 8 | g6 | 1 ～ 15 | 8 ～ 18 | ||
- | 1 | 7 Days | 10 | No | Female Thread | Directly Quenched | Stainless Steel | - | EN 1.4037 Equiv. | 11 ～ 15 | 10 | g6 | 1 ～ 20 | 10 ～ 18 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Stainless Steel | - | EN 1.4037 Equiv. | 1.5 ～ 3 | 1 | 0.012/0.007 | 1 | 12 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Stainless Steel | - | EN 1.4037 Equiv. | 2.5 ～ 4 | 2 | 0.012/0.007 | 1 | 12 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Stainless Steel | - | EN 1.4037 Equiv. | 4 ～ 6 | 3 | 0.012/0.007 | 2 | 12 ～ 15 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Stainless Steel | - | EN 1.4037 Equiv. | 5 ～ 7 | 4 | 0.012/0.007 | 2 | 12 ～ 15 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Stainless Steel | - | EN 1.4037 Equiv. | 6 ～ 8 | 5 | 0.012/0.007 | 2 | 12 ～ 15 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Stainless Steel | - | EN 1.4037 Equiv. | 7 ～ 9 | 6 | 0.012/0.007 | 2 | 12 ～ 15 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Stainless Steel | - | EN 1.4037 Equiv. | 9 ～ 13 | 8 | 0.012/0.007 | 3 | 15 ～ 18 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Stainless Steel | - | EN 1.4037 Equiv. | 11 ～ 15 | 10 | 0.012/0.007 | 3 | 15 ～ 18 | ||
- | 1 | 7 Days | 10 | Flathead Slot | Female Thread | Directly Quenched | Stainless Steel | - | EN 1.4037 Equiv. | 6 ～ 8 | 5 | 0.012/0.007 | 2 | 12 ～ 15 | ||
- | 1 | 7 Days | 10 | Flathead Slot | Female Thread | Directly Quenched | Stainless Steel | - | EN 1.4037 Equiv. | 7 ～ 9 | 6 | 0.012/0.007 | 2 | 12 ～ 15 | ||
- | 1 | 7 Days | 10 | Flathead Slot | Female Thread | Directly Quenched | Stainless Steel | - | EN 1.4037 Equiv. | 9 ～ 13 | 8 | 0.012/0.007 | 3 | 15 ～ 18 | ||
- | 1 | 7 Days | 10 | Flathead Slot | Female Thread | Directly Quenched | Stainless Steel | - | EN 1.4037 Equiv. | 11 ～ 15 | 10 | 0.012/0.007 | 3 | 15 ～ 18 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Steel | Equivalent to SKS3 | - | 1.5 ～ 3 | 1 | 0.012/0.007 | 1 ～ 5 | 3 ～ 12 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Steel | Equivalent to SKS3 | - | 2.5 ～ 4 | 2 | 0.012/0.007 | 1 ～ 10 | 4 ～ 12 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Steel | Equivalent to SKS3 | - | 4 ～ 6 | 3 | 0.012/0.007 | 1 ～ 10 | 5 ～ 15 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Steel | Equivalent to SKS3 | - | 5 ～ 7 | 4 | 0.012/0.007 | 1 ～ 10 | 5 ～ 15 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Steel | Equivalent to SKS3 | - | 6 ～ 8 | 5 | 0.012/0.007 | 1 ～ 10 | 5 ～ 15 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Steel | Equivalent to SKS3 | - | 7 ～ 10 | 6 | 0.012/0.007 | 1 ～ 12 | 6 ～ 15 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Steel | Equivalent to SKS3 | - | 9 ～ 13 | 8 | 0.012/0.007 | 1 ～ 15 | 8 ～ 15 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Steel | Equivalent to SKS3 | - | 11 ～ 15 | 10 | 0.012/0.007 | 1 ～ 20 | 10 ～ 18 | ||
- | 1 | 7 Days | 10 | Flathead Slot | Female Thread | Directly Quenched | Steel | Equivalent to SKS3 | - | 6 ～ 8 | 5 | g6 | 1 ～ 10 | 6 ～ 15 | ||
- | 1 | 7 Days | 10 | Flathead Slot | Female Thread | Directly Quenched | Steel | Equivalent to SKS3 | - | 7 ～ 10 | 6 | g6 | 1 ～ 12 | 6 ～ 15 | ||
- | 1 | 7 Days | 10 | Flathead Slot | Female Thread | Directly Quenched | Steel | Equivalent to SKS3 | - | 9 ～ 13 | 8 | g6 | 1 ～ 15 | 8 ～ 18 | ||
- | 1 | 7 Days | 10 | Flathead Slot | Female Thread | Directly Quenched | Steel | Equivalent to SKS3 | - | 11 ～ 15 | 10 | g6 | 1 ～ 20 | 10 ～ 18 | ||
- | 1 | 7 Days | 10 | No | Female Thread | Directly Quenched | Steel | Equivalent to SKS3 | - | 6 ～ 8 | 5 | g6 | 1 ～ 10 | 6 ～ 15 | ||
- | 1 | 7 Days | 10 | No | Female Thread | Directly Quenched | Steel | Equivalent to SKS3 | - | 7 ～ 10 | 6 | g6 | 1 ～ 12 | 6 ～ 15 | ||
- | 1 | 7 Days | 10 | No | Female Thread | Directly Quenched | Steel | Equivalent to SKS3 | - | 9 ～ 13 | 8 | g6 | 1 ～ 15 | 8 ～ 18 | ||
- | 1 | 7 Days | 10 | No | Female Thread | Directly Quenched | Steel | Equivalent to SKS3 | - | 11 ～ 15 | 10 | g6 | 1 ～ 20 | 10 ～ 18 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Steel | Equivalent to SKS3 | - | 1.5 ～ 3 | 1 | 0.012/0.007 | 1 | 12 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Steel | Equivalent to SKS3 | - | 2.5 ～ 4 | 2 | 0.012/0.007 | 1 | 12 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Steel | Equivalent to SKS3 | - | 4 ～ 6 | 3 | 0.012/0.007 | 2 | 12 ～ 15 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Steel | Equivalent to SKS3 | - | 5 ～ 7 | 4 | 0.012/0.007 | 2 | 12 ～ 15 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Steel | Equivalent to SKS3 | - | 6 ～ 8 | 5 | 0.012/0.007 | 2 | 12 ～ 15 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Steel | Equivalent to SKS3 | - | 7 ～ 9 | 6 | 0.012/0.007 | 2 | 12 ～ 15 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Steel | Equivalent to SKS3 | - | 9 ～ 13 | 8 | 0.012/0.007 | 3 | 15 ～ 18 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | Directly Quenched | Steel | Equivalent to SKS3 | - | 11 ～ 15 | 10 | 0.012/0.007 | 3 | 15 ～ 18 | ||
- | 1 | 7 Days | 10 | Flathead Slot | Female Thread | Directly Quenched | Steel | Equivalent to SKS3 | - | 6 ～ 8 | 5 | 0.012/0.007 | 2 | 12 ～ 15 | ||
- | 1 | 7 Days | 10 | Flathead Slot | Female Thread | Directly Quenched | Steel | Equivalent to SKS3 | - | 7 ～ 9 | 6 | 0.012/0.007 | 2 | 12 ～ 15 | ||
- | 1 | 7 Days | 10 | Flathead Slot | Female Thread | Directly Quenched | Steel | Equivalent to SKS3 | - | 9 ～ 13 | 8 | 0.012/0.007 | 3 | 15 ～ 18 | ||
- | 1 | 7 Days | 10 | Flathead Slot | Female Thread | Directly Quenched | Steel | Equivalent to SKS3 | - | 11 ～ 15 | 10 | 0.012/0.007 | 3 | 15 ～ 18 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | No | Stainless Steel | - | EN 1.4301 Equiv. | 1.5 ～ 3 | 1 | 0.012/0.007 | 1 ～ 5 | 3 ～ 12 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | No | Stainless Steel | - | EN 1.4301 Equiv. | 2.5 ～ 4 | 2 | 0.012/0.007 | 1 ～ 10 | 4 ～ 12 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | No | Stainless Steel | - | EN 1.4301 Equiv. | 4 ～ 6 | 3 | 0.012/0.007 | 1 ～ 10 | 5 ～ 15 | ||
- | 1 | 7 Days | 10 | No | Straight(Press Fit) | No | Stainless Steel | - | EN 1.4301 Equiv. | 5 ～ 7 | 4 | 0.012/0.007 | 1 ～ 10 | 5 ～ 15 |
Loading...
Basic information
| Basic Shape | Large Head | Inlet Side Tip Shape | Round | Inlet Side Tip Type | Round Tapered |
|---|---|---|---|---|---|
| Surface Treatment | Not Provided | Positioning Side O.D. Tolerance | 0/-0.01 |
Configure
Basic Attributes
-
Inlet Style
-
No -
Flathead Slot
-
-
Mounting Side Shape
-
Straight(Press Fit) -
Female Thread
-
-
Heat Treatment
- No
- Directly Quenched
-
Material
- Steel
- Stainless Steel
-
Steel Type
- Equivalent to SKS3
-
Stainless Steel Type
-
Locating Section Outer Dia. P(Ø)
-
Mounting Side Dia. D(Ø)
-
Mounting Side Outer Dia. Tolerance
-
Positioning Part Length B(mm)
-
L(mm)
-
Type
- CHPSF
- CHPSFM
- CHPSFS
- CHPST
- CHPSTM
- HPSF
- HPSFM
- HPSFS
- HPST
- HPSTM
- SHPSF
- SHPSFM
- SHPST
- SHPSTM
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 7 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
![[Precision] X-Axis / Cross Roller](http://content.misumi-ec.com/image/upload/f_auto,t_product_recommend_a/v1/p/jp/product/series/110300196460/110300196460_001.jpg)
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.