Confirmed
- Applicable Screws M(mm)
- 8
- Retainer Material
- Rubber Material
- Type
- CAD
- 2D
- 3D
- Est. shipping days
- All
- Same-day shipping possible
Seal Washers / Thread Style / Standard Type (GSWM8)
Outline drawing and specifications table
Dimensional Drawings
| Type | (1) Metal Part | (2) Rubber Part | Applicable Temperature Range | ||
| [M] Material | [S] Surface Treatment | [M] Material | [H] Hardness | ||
| GSWM | EN 1.0330 Equiv. | Chromate | Nitrile Rubber (NBR) | Shore A65 | －30 to 100°C |
| GSWMF | Fluoro Rubber (FKM) | Shore A70 | －10 to 200°C | ||
| SGSWMF | EN 1.4301 Equiv. | - | Fluoro Rubber (FKM) | Shore A70 | －10 to 200°C |
Specification Table
| Part Number |
| SGSWMF6 |
| Part Number | T | D | Applicable Bolt | Max allowable pressure | Reference Value | |||||
| Tightening Torque N⋅m | Size of Application Part | |||||||||
| Hole I.D. max. | Tightening Face O.D. min. | Chamfering max. | ||||||||
| Type | No. | min. | max. | |||||||
| GSWM (Nitrile Rubber) GSWMF (Fluoro Rubber) SGSWMF (Stainless Steel) Fluoro Rubber | 3 | 1 | 7.8 | M3 | 5 MPa | 0.7 | 1.2 | 3.3 | 5.4 | 0.2 |
| 4 | 1.3 | 10.2 | M4 | 5 MPa | 1 | 2.2 | 4.4 | 7 | 0.2 | |
| 5 | 12.5 | M5 | 5 MPa | 2.2 | 3.8 | 5.3 | 8 | 0.2 | ||
| 6 | 14 | M6 | 10 MPa | 3 | 8.5 | 6.5 | 10 | 0.2 | ||
| 8 | 17.5 | M8 | 10 MPa | 4.5 | 20 | 8.7 | 13 | 0.4 | ||
| 10 | 1.5 | 20.3 | M10 | 10 MPa | 6 | 25 | 10.8 | 15 | 0.4 | |
| 12 | 2 | 24.3 | M12 | 10 MPa | 8 | 56 | 13.7 | 17.5 | 0.4 | |
| 16 | 30.3 | M16 | 10 MPa | 10 | 125 | 17.5 | 23 | 0.8 | ||
| 20 | 3 | 36.5 | M20 | 10 MPa | 40 | 135 | 21.5 | 28 | 0.8 | |
| 24 | 42.8 | M24 | 10 MPa | 60 | 190 | 25 | 34 | 0.8 | ||
Cautions on Installation
·For tightening with nuts.
1) Install the washer (1) by rotating
onto the thread
onto the thread
2)(1) After insert the washer
all the way to the base,
(2) Insert the nut
all the way to the base,
(2) Insert the nut
3) Tighten the nut (2) until
it firmly contacts the washer
it firmly contacts the washer
[NG] (2) With push in the nut
(1) Do not insert washers.
(1) Do not insert washers.
·For tightening with bolts.
1) Install the washer (1) by rotating
onto the thread
onto the thread
2)(1) After insert the washer
to below the neck,
(2) insert the bolts
to below the neck,
(2) insert the bolts
3) Tighten the bolt (2) until
it firmly contacts the washer
it firmly contacts the washer
[NG] (2) With bolt, please do not push
(1) washer in.
(1) washer in.
Example
More Information
Basic information
[Features] One sealing washer for fixing threaded sections. [Material] Corresponds to EN 1.0330 Equiv., EN 1.4301 Equiv. (sintered).
Catalog
Loading...
Part number has been confirmed