Manufacturer part number: PSFPA13-50-F11-P10-M4-N6-SC20
Brand: MISUMI
Price: Please contact the support for quotation
Delivery time: 4 Days
Shaft Dia. D: 13 mm
[L] Length (Shaft): 50 mm
Material: [Steel] EN 1.3505 Equiv.
Heat Treatment: Induction Hardened
Surface Treatment: Hard Chrome Plated
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
PSFPA13-50-F11-P10-M4-N6-SC20
Type | Material | Hardness | Surface Treatment | ||
D Tol. g6 | D Tol. h5 | D Tol. f8 | |||
SFPPA | SFUP | - | EN 1.3505 Equiv. | Effective Hardened Depth of Induction Hardening >>P.112 EN 1.3505 Equiv. 58HRC~ EN 1.4037 Equiv. 56HRC~ | - |
SSFPA | SSFUP | - | EN 1.4037 Equiv. | ||
PSFPA | PSFUP | - | EN 1.3505 Equiv. | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 5µ or More ~ | |
PSSFPA | PSSFUP | - | EN 1.4037 Equiv. | ||
RSFPA | - | - | EN 1.3505 Equiv. | LTBC Plating | |
- | - | PFPGA | EN 1.1191 Equiv. | - | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 10µ or More ~ |
- | - | PSFPGA | EN 1.4301 Equiv. |
Part Number | - | L | - | F | - | P | - | M | - | N | - | SC |
SFPPA20 SSFPA20 | - - | 400 400 | - - | F25 F25 | - - | P16 P16 | - - | M10 M10 | - - | N10 N10 | - - | SC10 SC10 |
D Tol. | |||
D | g6 | h5 | f8 |
8 | -0.005 -0.014 | 0 -0.006 | -0.013 -0.035 |
10 | |||
12 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 |
13 | |||
15 | |||
16 | |||
18 | |||
20 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 |
25 | |||
30 | |||
35 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 |
40 | |||
50 |
Part Number | 1mm Increment | M (Coarse) Selection | N (Coarse) Selection | Wrench Flats Dimensions | (Y)Max. | R | C | ||||||||||||||||||||||||||
Type | D | L | F | P | SC | W | ℓ1 | ||||||||||||||||||||||||||
(D Tolerance g6) SFPPA SSFPA PSFPA PSSFPA RSFPA (D≤30, L≤500) (D Tolerance f8) PFPGA PSFPGA | (D Tolerance h5) SFUP SSFUP PSFUP PSSFUP | 8 | 25~798 | 2≤F≤Px4 | 6 | 3 | 3 | 4 | 5 | SC=1mm Increment SC+ℓ1≤L SC≥0 Details of Wrench Flats >>P.112 | 7 | 8 | 800 | 0.3 or Less | 0.5 or Less | ||||||||||||||||||
10 | 25~798 | 6~ 8 | 3 | 4 | 5 | 3 | 4 | 5 | 6 | 8 | 800 | ||||||||||||||||||||||
12 | 25~998 | 6~10 | 3 | 4 | 5 | 6 | 4 | 5 | 6 | 8 | 10 | 10 | 1000 | ||||||||||||||||||||
13 | 25~998 | 6~11 | 3 | 4 | 5 | 6 | 8 | 4 | 5 | 6 | 8 | 11 | 1000 | ||||||||||||||||||||
15 | 25~998 | 6~13 | 3 | 4 | 5 | 6 | 8 | 10 | 4 | 5 | 6 | 8 | 10 | 13 | 1000 | ||||||||||||||||||
16 | 25~1198 | 6~14 | 3 | 4 | 5 | 6 | 8 | 10 | 4 | 5 | 6 | 8 | 10 | 14 | 1200 | ||||||||||||||||||
18 | 25~1198 | 8~16 | 4 | 5 | 6 | 8 | 10 | 12 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 1200 | |||||||||||||||||
20 | 25~1198 | 8~17 | 4 | 5 | 6 | 8 | 10 | 12 | 4 | 5 | 6 | 8 | 10 | 12 | 17 | 1200 | 1.0 or Less | ||||||||||||||||
25 | 25~1198 | 8~22 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 22 | 1200 | |||||||||||||||
30 | 25~1498 | 9~27 | 5 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 6 | 8 | 10 | 12 | 16 | 20 | 27 | 15 | 1500 | ||||||||||||||
35 | 25~1498 | 9~32 | 5 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 8 | 10 | 12 | 16 | 20 | 24 | 30 | 1500 | 0.5 or Less | ||||||||||||||
40 | 25~1498 | 11~37 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 30 | 10 | 12 | 16 | 20 | 24 | 30 | 36 | 20 | 1500 | ||||||||||||||
50 | 25~1498 | 11~47 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 30 | 12 | 16 | 20 | 24 | 30 | 41 | 1500 |
3D preview is not available, because the part number has not yet been determined.
Part Number
|
---|
PSFPA13-50-F11-P10-M4-N6-SC20 |
Part Number | Minimum order quantity | Volume Discount | RoHS | Shaft Dia. D (mm) | [L] Length (Shaft) (mm) | Material | Heat Treatment | Surface Treatment | Shaft Fits Tolerance | Hardness | Add Wrench Flats at One Location [SC] (mm) | Change Tapped Thread N to Fine One [NSC] (mm) | Change the effective tap depth to M(N)x3 (mm) | F (mm) | P (mm) | Tapped (Coarse (mm) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | 4 Days | 10 | 13 | 50 | [Steel] EN 1.3505 Equiv. | Induction Hardened | Hard Chrome Plated | g6 | Induction Hardening (58HRC~) | 20 | - | - | 11 | 10 | 3 ~ 8 |
Loading...
Basic Shape | Solid, One End Stepped | Shaft end Shape (Left) | Tapped | Shaft end Shape (Right) | Tapped |
---|---|---|---|---|---|
Shaft end Perpendicularity | 0.2 |
Configure
Basic Attributes
Shaft Dia. D(mm)
Material
Heat Treatment
Surface Treatment
Shaft Fits Tolerance
Hardness
Change Tapped Thread N to Fine One [NSC](mm)
Change the effective tap depth to M(N)x3(mm)
Tapped (Coarse(mm)
Type
[L] Length (Shaft)(mm)
Add Wrench Flats at One Location [SC](mm)
F(mm)
P(mm)
Filter by CAD data type
Filter by standard shipping days
Optional Attributes