Configure
- Material
- Material
- I.D. Tolerance
- Bushing Dia. D(Ø)
- 8
- 10
- 12
- 16
- 20
- 25
- I.D. P(Ø)[3-21/0.01Ø units]
- Overall Length L(mm)[5-25/1mm units]
- F(mm)[0.1-10/0.1mm units]
- Shoulder Thickness T(mm)
- 2
- 3
- 5
- CAD
- 2D
- 3D
- Est. shipping days
- All
- Within 9 working days
Bushings for Inspection Components / D-Shape / Shouldered
Part number:
possible part numbers found.Outline drawing and specifications table
■Shouldered
| [M] Material | [H] Hardness | [S] Surface Treatment | Type | |
| P+0.03 +0.01F+0.05 0 | PH7F+0.03 0 | |||
| JIS−SKS93 Equivalent | 50 to 60HRC | - | KJBSTK | KJBHSTK |
| JIS−SKS93 Equivalent | 50 to 60HRC | Electroless Nickel Plating | — | — |
| EN 1.4125 Equiv. or 13Cr Stainless Steel | 45 to 50HRC | - | KJBSTKC | KJBHSTKC |
Specification Table
| Part Number | — | P | — | F | — | L | — | T |
| KJBSTK12 | — | P8.00 | — | F3.0 | — | L10 | — | T3 |
| P | H7 |
| 3.00 | +0.010 0 |
| 3.01 to 6.00 | +0.012 0 |
| 6.01 to 10.00 | +0.015 0 |
| 10.01 to 18.00 | +0.018 0 |
| 18.01 to 21.00 | +0.021 0 |
| Part Number | P 0.01 mm Increments | F (F < P/2) 0.1 mm Increments | L 1 mm Increments | T Selection | H | ||
| Type | D | ||||||
| Shouldered | |||||||
| P+0.03 +0.01F+0.05 0 | PH7F+0.03 0 | ||||||
| KJBSTK KJBSTKC | KJBHSTK KJBHSTKC | 8 | 3.00 to 5.00 | 0.3 to 2.4 | 5 to 25 | 2 3 5 T ≤ L-2 | D+4 |
| 10 | 3.00 to 7.00 | 0.3 to 3.0 | D+4 | ||||
| 12 | 3.00 to 9.00 | 0.5 to 4.0 | D+4 | ||||
| 16 | 4.00 to 13.00 | 0.5 to 6.0 | D+4 | ||||
| 20 | 6.00 to 17.00 | 1.0 to 8.0 | D+4 | ||||
| 25 | 8.00 to 21.00 | 2.0 to 10.0 | D+4 | ||||
Alterations
| Part Number | — | P | — | F | — | L | — | T | — | (FC·NC ... etc.) |
| KJBSK12 | — | P8.00 | — | F2.0 | — | L10 | — | FC |
| Alterations | Code | Spec. |
Groove (for Adhesive Reservoir) | FC | Adds an adhesive reservoir groove. " ! "D ≥ P+3: Applicable only when a wall thickness is 1.5 mm or more. [ ! ] Applicable only when L ≥ 10 for Straight Type, |
Groove (for Retaining) | NC | Adds groove for retaining. " ! "D ≥ P+3: Applicable only when a wall thickness is 1.5 mm or more. [ ! ] Applicable only when L ≥ 10 for Straight Type, |
| Alterations | Code | Spec. | |
| Additional Surface Treatment (Black Oxide) | STC | Adds black oxide surface treatment. [ ! ] Applicable only to material JIS−SKS93 (except electroless nickel plating). | |
Shoulder Thickness Tolerance | TKC | Changes shoulder thickness tolerance to ±0.01. [ ! ] Applicable to Shouldered Type only [NG] Combination with alteration LKC is not available | |
L Dimension Tolerance | LKC | Changes L dimension tolerance to 0 -0.05. [NG] Combination with TKC is not available | |
Part number list
Number of items
| Part number |
|---|
Unit price (excluding VAT)(Unit price including VAT) | Standard shipping days |
|---|
- ( - ) | 9 working days |
- ( - ) | 9 working days |
- ( - ) | 9 working days |
- ( - ) | 9 working days |
- ( - ) | 9 working days |
- ( - ) | 9 working days |
- ( - ) | 9 working days |
- ( - ) | 9 working days |
- ( - ) | 9 working days |
- ( - ) | 9 working days |
- ( - ) | 9 working days |
- ( - ) | 9 working days |
- ( - ) | 9 working days |
- ( - ) | 9 working days |
- ( - ) | 9 working days |
- ( - ) | 9 working days |
- ( - ) | 9 working days |
- ( - ) | 9 working days |
- ( - ) | 9 working days |
- ( - ) | 9 working days |
- ( - ) | 9 working days |
- ( - ) | 9 working days |
- ( - ) | 9 working days |
- ( - ) | 9 working days |
More Information
Basic information
[Features] Bushing which can be used in combination with a stepped dowel pin.
