Confirmed
- Extrusion Type
- Surface Treatment
- Material
- L Dimension Fixed, Specified
- Overall Length L(mm)[50-4000/0.5mm units]
- Type
- CAD
- 2D
- 3D
- Est. shipping days
- All
- Within 3 working days
Additional options
- Counterboring [Z](Nominal Dia. Selection)
- 5
- 6
- Add Counterbored Hole Vertically [XA](Distance from the Left End Plane)(mm)[0-4000/0.5mm units]
- Add Counterbored Hole Vertically [XB](Distance from the Left End Plane)(mm)[0-4000/0.5mm units]
- Add Counterbored Hole Vertically [XC](Distance from the Left End Plane)(mm)[0-4000/0.5mm units]
- Add Counterbored Hole Vertically [XD](Distance from the Left End Plane)(mm)[0-4000/0.5mm units]
- Add Counterbored Hole Vertically [XE](Distance from the Left End Plane)(mm)[0-4000/0.5mm units]
- High Precision Cut
- Vertical Wrench Hole Machining [AV](Distance from the Left End Plane)(mm)[0-4000/0.5mm units]
- Vertical Wrench Hole Machining [BV](Distance from the Left End Plane)(mm)[0-4000/0.5mm units]
- Vertical Wrench Hole Machining [CV](Distance from the Left End Plane)(mm)[0-4000/0.5mm units]
- Vertical Wrench Hole Machining [DV](Distance from the Left End Plane)(mm)[0-4000/0.5mm units]
- Vertical Wrench Hole Machining [EV](Distance from the Left End Plane)(mm)[0-4000/0.5mm units]
- Wrench Hole Machining in Fixed Position
- 1 Row Crisscross from Left End Face [LCP]
- 1 Row Crisscross from Right End Face [RCP]
- 1 Row Horizontally from Left End Face [LCH]
- 1 Row Horizontally from Right End Face [RCH]
- 1 Row Vertically from Left End Face [LCV]
- 1 Row Vertically from Right End Face [RCV]
- 2 Rows Crisscross from Left End Face [LWP]
- 2 Rows Crisscross from Right End Face [RWP]
- 2 Rows Horizontally from Left End Face [LWH]
- 2 Rows Horizontally from Right End Face [RWH]
- 2 Rows Vertically from Left End Face [LWV]
- 2 Rows Vertically from Right End Face [RWV]
- 3 Rows Crisscross from Left End Face [LEP]
- 3 Rows Crisscross from Right End Face [REP]
- 3 Rows Horizontally from Left End Face [LEH]
- 3 Rows Horizontally from Right End Face [REH]
- 3 Rows Vertically from Left End Face [LEV]
- 3 Rows Vertically from Right End Face [REV]
- Offset Fixed Hole Position for Thickness of Extrusion End Caps
- Horizontal Wrench Hole Machining [AH](Distance from the Left End Plane)(mm)[0-4000/0.5mm units]
- Horizontal Wrench Hole Machining [BH](Distance from the Left End Plane)(mm)[0-4000/0.5mm units]
- Horizontal Wrench Hole Machining [CH](Distance from the Left End Plane)(mm)[0-4000/0.5mm units]
- Horizontal Wrench Hole Machining [DH](Distance from the Left End Plane)(mm)[0-4000/0.5mm units]
- Horizontal Wrench Hole Machining [EH](Distance from the Left End Plane)(mm)[0-4000/0.5mm units]
- Horizontal + Vertical Wrench Hole Machining [AP](Distance from the Left End Plane)(mm)[0-4000/0.5mm units]
- Horizontal + Vertical Wrench Hole Machining [BP](Distance from the Left End Plane)(mm)[0-4000/0.5mm units]
- Horizontal + Vertical Wrench Hole Machining [CP](Distance from the Left End Plane)(mm)[0-4000/0.5mm units]
- Horizontal + Vertical Wrench Hole Machining [DP](Distance from the Left End Plane)(mm)[0-4000/0.5mm units]
- Horizontal + Vertical Wrench Hole Machining [EP](Distance from the Left End Plane)(mm)[0-4000/0.5mm units]
- Add Counterbored Hole Horizontally [YA](Distance from the Left End Plane)(mm)[0-4000/0.5mm units]
- Add Counterbored Hole Horizontally [YB](Distance from the Left End Plane)(mm)[0-4000/0.5mm units]
- Add Counterbored Hole Horizontally [YC](Distance from the Left End Plane)(mm)[0-4000/0.5mm units]
- Add Counterbored Hole Horizontally [YD](Distance from the Left End Plane)(mm)[0-4000/0.5mm units]
- Add Counterbored Hole Horizontally [YE](Distance from the Left End Plane)(mm)[0-4000/0.5mm units]
- L Hole Machining [JLP](Machining of L Holes Crisscross on Top Section (Pitch Configurable))(mm)[12-3982/1mm units]
- Number of Holes [H](pc(s).)
- 2
- 3
- 4
- 5
- Tapped Holes on End Faces
- Fine Chamfering on Both End Faces (C0.2-0.3)
5 Series / slot width 6 / 20x20mm (HFS5-2020-420-TPW)
Outline drawing and specifications table
Dimensional Drawing
HFS (Standard Type)
NFS (Economy Type)
NFS (Economy Type)
* No tolerance is specified for fixed length extrusions
| 5 Series |
 |
Slot Details
(Common to All Series)
Slot Bottom Details
(HFS, CAF, HFSY Series)
(NFS, NFSB, NFSF, NFST Series)
Enlarged View of A
Enlarged View of A
■The 5 series has a
groove width of 6 mm and is applicable to M5 screws.
[ ! ] Cut surface and altered parts are not surface treated.
[ ! ] If end tap is specified, it will be machined in the red circle.
groove width of 6 mm and is applicable to M5 screws.
[ ! ] Cut surface and altered parts are not surface treated.
[ ! ] If end tap is specified, it will be machined in the red circle.
Type Overview
■Type Comparison Overview
NFSL/HFSL/NFS (NEFS)/EFS
Light and economical, but inferior in rigidity HFS/GNFS/GFS
Heavy and higher price, but superior in rigidity
NFSL/HFSL/NFS (NEFS)/EFSLight and economical, but inferior in rigidity HFS/GNFS/GFS
Heavy and higher price, but superior in rigidity
Part Number Display Method
| Part Number | — | L |
| HFS5−2020 | — | 800 |
| KHFS5−2020 | — | 1000 |
| KNFS5−2020 | — | 4000 |
Specification Table
Configurable Length Extrusions (Alterations: Possible)
| Type | Material | Surface Treatment | Part Number | L 0.5 mm Increments (Tolerance ±0.5 mm) | Mass kg/m | Sectional Area mm2 | Cross Sectional Moment of Inertia mm4 | |
| ℓx | ℓy | |||||||
| HFS | EN AW-6061-T5 Equiv. | Clear Anodize | HFS5－2020 | 50 to 4000 | 0.5 | 183 | 0.742 × 104 | 0.742 × 104 |
| HFS | EN AW-6061-T5 Equiv. | Black Anodize | HFSB5－2020 | 50 to 4000 | 0.5 | 183 | 0.742 × 104 | 0.742 × 104 |
| HFS | EN AW-6061-T5 Equiv. | Clear Coating | CAF5－2020 | 50 to 4000 | 0.5 | 183 | 0.742 × 104 | 0.742 × 104 |
| HFS | EN AW-6061-T5 Equiv. | Baked-on Finish (Yellow)*1 | HFSY5－2020 | 50 to 4000 | 0.5 | 183 | 0.742 × 104 | 0.742 × 104 |
| NFS | EN AW-6063-T5 Equiv. | Clear Anodize | NFS5－2020 | 50 to 4000 | 0.5 | 183 | 0.742 × 104 | 0.742 × 104 |
| NFS | EN AW-6063-T5 Equiv. | Black Anodize | NFSB5－2020 | 50 to 4000 | 0.5 | 183 | 0.742 × 104 | 0.742 × 104 |
[ ! ]*1 The color of HFSY5 is D22-80V (Japan Paint Manufacturers Association, Munsell Value Reference 2.5Y8/12).
[ ! ] Applicable to 6,000 mm depending on products.
[ ! ] Not applicable to some extrusions.
Fixed Length Extrusion (Effective Length 4,000 mm, 1,000 mm) Specification Table (Alteration: Not possible)
[ ! ] Part numbers beginning with the character "K" indicate Fixed Length Extrusion.
[ ! ]*1 The color of KHFSY5 is D22-80 V (Japan Paint Manufacturers Association, Munsell Value Reference 2.5Y8/12).
[ ! ]*2 An effective Length of 4,000 mm indicates the extrusion with 4,000 mm or more effective length.
The actual length with extra lengths on ends is more than 4000 mm (several tens of mm).
Fixed Length Extrusions need to be cut by users thus the exact length cannot be specified.
[!] Recommended heat resistance temperature is up to 70°C. If the temperature remains at 100°C or higher, bending will occur due to the load.
However, temporary high temperatures up to 100°C, such as water vapor, are acceptable.
| Type | Material | Surface Treatment | Part Number | Lmm (No tolerance regulation) *2 | Sectional Area mm2 | Cross Sectional Moment of Inertia mm4 | |
| ℓx | ℓy | ||||||
| HFS | EN AW-6061-T5 Equiv. | Clear Anodize | KHFS5－2020 | 4000 | 183 | 0.742 × 104 | 0.742 × 104 |
| HFS | EN AW-6061-T5 Equiv. | Clear Anodize | KHFS5－2020 | 1000 | 183 | 0.742 × 104 | 0.742 × 104 |
| HFS | EN AW-6061-T5 Equiv. | Black Anodize | KHFSB5－2020 | 4000 | 183 | 0.742 × 104 | 0.742 × 104 |
| HFS | EN AW-6061-T5 Equiv. | Clear Coating | KCAF5－2020 | 4000 | 183 | 0.742 × 104 | 0.742 × 104 |
| HFS | EN AW-6061-T5 Equiv. | Baked-on Finish (Yellow)*1 | KHFSY5－2020 | 4000 | 183 | 0.742 × 104 | 0.742 × 104 |
| NFS | EN AW-6063-T5 Equiv. | Clear Anodize | KNFS5－2020 | 4000 | 183 | 0.742 × 104 | 0.742 × 104 |
| NFS | EN AW-6063-T5 Equiv. | Black Anodize | KNFSB5－2020 | 4000 | 183 | 0.742 × 104 | 0.742 × 104 |
[ ! ]*2 An effective Length of 4,000 mm indicates the extrusion with 4,000 mm or more effective length.
The actual length with extra lengths on ends is more than 4000 mm (several tens of mm).
Fixed Length Extrusions need to be cut by users thus the exact length cannot be specified.
[!] Recommended heat resistance temperature is up to 70°C. If the temperature remains at 100°C or higher, bending will occur due to the load.
However, temporary high temperatures up to 100°C, such as water vapor, are acceptable.
Features
5 Series Applications
Most lightweight in aluminum extrusions usable with various fastening parts.
Suited for locations where small forces apply, such as for small coverings, small part racks and safety fences.
Usable in combination with different slot width extrusions.
Extrusions with different slot width can be combined when integrating frames and coverings.
5 Series, 6 Series, 8 Series Slot Width Mixed Extrusions and Assembly Brackets for Different Extrusion Sizes are available.
Utilize these components to assemble an extrusion frame as you desire.
Selection Support Information
■Extrusion Connection Method
The extrusion connection methods are roughly classified into the following two categories.
The extrusion connection methods are roughly classified into the following two categories.
Brackets | Blind Joint | ||
Connection Examples |  |  | |
Characteristics | ·Connect outside the extrusion ·Can be moved to any position ·Inferior in appearance | ·Connect inside the extrusion ·Superior in appearance ·Machining is required on extrusions |
■Tapping alteration on ends (5 Series□20)
Center part
[ ! ] For other alterations, see "Alterations" below.
Center part
Size/Position | Left Side | Right Side | Both Sides | Cross Section View | |
M5 Depth 15 | LTP | RTP | TPW | ||
M3 Depth 6 (Heli-Coil Inserted) | LHP | RHP | HPW | ||
Tap Position |  |  |  |  |
■How to calculate aluminum extrusions load capacity (deflection)
[ ! ] The load capacity is a load where the deflection of the extrusion is within 1 mm per 1,000 mm of length.
Deflection exceeding this will not cause breakage, but it should be considered the maximum practical deflection. (The allowable deflection is proportional to the length. Example: 0.5 mm for 500 mm, 2 mm for 2,000 mm)
[ ! ] The load capacity is a load where the deflection of the extrusion is within 1 mm per 1,000 mm of length.
Deflection exceeding this will not cause breakage, but it should be considered the maximum practical deflection. (The allowable deflection is proportional to the length. Example: 0.5 mm for 500 mm, 2 mm for 2,000 mm)
Alterations (Available only for configured length, not available for fixed length)
[ ! ] MISUMI configurable length aluminum extrusion product can be utilized for structure building with highly enhanced design flexibility when the following various alteration options are applied.
Some alterations are not applicable depending on types and sizes.
Some alterations are not applicable depending on types and sizes.
| Type | Alterations | Alteration Codes | App. Example | Contents |
|---|---|---|---|---|
| > End Tapping | End Tapping (Center Hole) | LTP/RTP/TPW LHP/RHP/HPW |  | Adds tapped holes on extrusion ends. Blind Joints which require this alteration (Screw Joint / Simple Joint) |
| End Tapping (4 Side Holes) | LSP/RSP/SPW |  | Adds tapped holes on extrusion corner ends. | |
| > Cutting Method Change | High Precision Cut | SC |  | Applies High Precision Cut with an overall length tolerance of L±0.2 (Standard = L±0.5). * Only applicable to L ≤ 1,500 |
| 45-Degree Cut | L□T45/R□T45 |  | Cuts with 45-degree angle. | |
| > Drill Wrench Hole | Wrench Hole in Fixed Position | LWP/RWP |  | Wrench access hole(s) for Blind Joints are drilled. The hole location will be aligned with the mating extrusion’s tapped hole location. Blind Joints which require this alteration (Screw Joint / Single Joint / Tapping Joint) |
| Extrusion End Cap The hole position moves by thickness | FL/FR |  | Offsets the wrench access hole for the thickness of Extrusion End Cap (3 mm). The extrusion end cap will be flat with the adjacent extrusion surface. | |
| Wrench Hole in Specified Position | AH/BH/AV/BV |  | Adds a wrench hole in a desired position from the left end. Use for Blind Jointing in beam sections, etc. | |
| > Counterboring | Counterbores in Specified Position | Z6/XA100 |  | Adds a counterbored hole in a desired position from the left end. Can be used for connecting extrusions or installing tables, etc. |
| > Blind Joints Dedicated Holes | D Hole | LDH/RDH |  | Adds required holes for Single Joint connections. (Single Joints) |
| S Hole | LSH |  | Adds required holes for Pre-Assembly. Insertion Double Joint connections. (Pre-Assembly Insertion Double Joints) | |
| M Hole | LMH |  | Adds required holes for Post-Assembly Insertion Double Joints, Center Joint connections. (Post-Assembly Insertion Double Joint / Center Joint) | |
| L Hole | JLP |  | Adds required holes for Parallel Joint connections. (Parallel Joints) | |
| > Other Machining | HFSR End Tapping | LTS/RTS/TSW |  | Necessary alteration to use Ends Protection Plates for HFSR series. |
| End Face C Chamfering | CW |  | Adds C Chamfering on extrusion ends. | |
| Labeling | ZZZ |  | Adds a sticker with catalog No. etc. on the aluminum extrusions. Although number of characters are limited, customer's own serial number or unit number can be labeled. |
List of Applicable Extrusion End Cap
Extrusion Part Number | Applicable Extrusion End Cap | |||||
Type | Color | Thickness | Part Number | Qty. Used | ||
| HFS5－2020 HFSB5－2020 CAF5－2020 HFSY5－2020 NFS5－2020 NFSB5－2020 Same for Fixed Length Extrusions (Part number starting with K). |  | End Cap Mounting | Black | 2.5 | HFC5-2020-B | 1 |
End Cap Mounting | Light Gray | 2.5 | HFC5-2020-S | 1 | ||
 | End Cap Mounting (Long Leg Type) | Black | 2.5 | HFCL5-2020-B | 1 | |
End Cap Mounting (Long Leg Type) | Light Gray | 2.5 | HFCL5-2020-S | 1 | ||
 | Screw Mounting | Black | 2.5 | HFCB5-2020-B | 1 | |
Screw Mounting | Light Gray | 2.5 | HFCB5-2020-S | 1 | ||
Screw Mounting | Yellow | 2.5 | HFCB5-2020-Y | 1 | ||
More Information
Basic information
Caution
- Cutting is free for this product. Please specify the length you prefer.
Catalog
Loading...
Part number has been confirmed