Configure
- Number of Extrusion Slots
- Extrusion Size: Width (A)(mm)
- 40
- 60
- Extrusion Size: Thickness (T)(mm)
- 39.2
- 59.2
- Overall Length L(mm)[100-3000/0.5mm units]
- CAD
- 2D
- 3D
- Est. shipping days
- All
- Within 7 working days
5 Series / slot width 6 / 40x60mm, Parallel Surfacing
Part number:
possible part numbers found.Outline drawing and specifications table
Dimensional Drawing
HFSP
Rectangular (Horizontal)
HFSP5－6040
HFSP5－6040
Rectangular (Vertical)
HFSP5－4060
HFSP5－4060
[ ! ] Milled surfaces and cut surfaces are not anodized.
[ ! ] When tapped hole alterations are specified, the red circles on the outline drawing of the aluminum extrusion will be machined.
[ ! ] When tapped hole alterations are specified, the red circles on the outline drawing of the aluminum extrusion will be machined.
■The 5 Series
is an aluminum extrusion with a 6 mm slot width. Applicable to M5 bolts.
is an aluminum extrusion with a 6 mm slot width. Applicable to M5 bolts.
Configurable Length Extrusion Specification Table
| Part Number | — | L |
| HFSP5−6040 | — | 300 |
| Type | Material | Surface Treatment | Part Number | L 0.5 mm Increments | T | A |
| HFS | EN AW-6061-T5 Equiv. | Clear Anodize | HFSP5－4060 | 50 to 4000 | 59.2 | 40 |
| HFS | EN AW-6061-T5 Equiv. | Clear Anodize | HFSP5－6040 | 50 to 4000 | 39.2 | 60 |
Alterations
[ ! ] MISUMI configurable length aluminum extrusion product can be utilized for structure building with highly enhanced design flexibility when the following various alteration options are applied.Some alterations are not applicable depending on types and sizes.
| Type | Alterations | Alteration Codes | App. Example | Contents |
|---|---|---|---|---|
| > Counterboring | Counterbores in Specified Position | Z6/XA100 |  | Adds a counterbored hole in a desired position from the left end. Can be used for connecting extrusions or installing tables, etc. |
| > Drill Wrench Hole | Wrench Hole in Specified Position | AH/BH/AV/BV |  | Adds a wrench hole in a desired position from the left end. Use for Blind Jointing in beam sections, etc. |
| > Cutting Method Change | High Precision Cut | SC |  | Applies High Precision Cut with an overall length tolerance of L±0.2 (Standard = L±0.5). * Only applicable to L ≤ 1,500 |
Adds a hole at a specified position.
| Alterations | Counterboring | Wrench Hole | High Precision Cut | ||||||||||||
| Code | Z Selection | XA | XB | XC | XD | XE | D Selection | AV | BV | CV | DV | EV | SC | ||
| Spec. | Z | d | d1 | Distance from the Left End Plane mm | D | Distance from the Left End Plane mm | 1,500 mm or less | ||||||||
| Specifications of Hole Size and Position | 5 | 5.5 | 9.5 | 7 or more(L－7) | 7 | 7 or more(L－7) | L Dim. ±0.2 | ||||||||
| 6 | 6.5 | 11 | |||||||||||||
Counterboring DirectionWrench Hole Machining Direction
* 1 When the cross section is rectangle (vertical), counterboring is not available for extrusions exceeding 60 mm in the length direction.
* 2 When the cross section is L-shaped, counterboring is not available for extrusions exceeding 60 mm in longitudinal direction, except for the lower portion.
* 1 When the cross section is rectangle (vertical), counterboring is not available for extrusions exceeding 60 mm in the length direction.
* 2 When the cross section is L-shaped, counterboring is not available for extrusions exceeding 60 mm in longitudinal direction, except for the lower portion.
[ ! ] When the cross section is L-shaped, select distance from left end by positioning the lower section on the right side.
Part number list
Number of items
Unit price (excluding VAT)(Unit price including VAT) | Standard shipping days |
|---|
- ( - ) | 7 working days |
- ( - ) | 7 working days |
More Information
Basic information
Caution
- Cutting is free for this product. Please specify the length you prefer.
Outline and specifications
App. Example
Installed button screws temporarily in reference plane, then slide the frame to fixing position, passing screw heads through frame slot.
Put wrench in the wrench hole and tighten the screw.
Catalog
Loading...