Configure
- Hole Position
- External Dimension A(mm)[25-200/0.1mm units]
- External Dimension B(mm)
- 15
- 16
- 20
- 22
- 25
- 32
- 38
- 50
- 60
- 65
- 75
- 100
- 125
[10-200/0.1mm units] - Plate Thickness t(mm)
- 5
- 6
- 8
- 9
- 10
- 12
- 15
- 16
- 19
- 20
- CAD
- 2D
- 3D
- Est. shipping days
- All
- Within 7 working days
- Within 19 working days
- Within 20 working days
Flat Bar / Rolled Aluminum, Mounting Plate/Bracket, B Dimension, HRMCA HUMCA
Part number:
possible part numbers found.Outline drawing and specifications table
HRMCA (B Dim. Selectable)
HUMCA (B Dim. Configurable)
[NG] For B Dim. Selectable Type (HR□□□), EN AW-5052 Equiv. cannot be specified
HUMCA (B Dim. Configurable)
HRMCA
HUMCA
[ ! ] Hole pitch dimension tolerance conforms to JIS B 0405 Class m.
[ ! ] C0.2 to C0.5, unless otherwise specified
[!] Green colored parameters can be omitted. If the parameter setting is omitted, the holes will be evenly distributed about the center.
[ ! ] C0.2 to C0.5, unless otherwise specified
[!] Green colored parameters can be omitted. If the parameter setting is omitted, the holes will be evenly distributed about the center.
■Hole Type Selection Chart
■Machining Limits
There are machining limits for thickness between hole and hole or between hole and end face.
(Example: "b" on the drawing below)
| Hole Type | Tapped Hole | Bolt Hole | Counterbore Front | Counterbore Back | |||||||||||||||||||||||||||||||||||||||
| Code | M·MA | N・NA | Z·ZF | ZB | |||||||||||||||||||||||||||||||||||||||
| Shape Diagram |  |  |  |  | |||||||||||||||||||||||||||||||||||||||
| Machining Specifications | Tap effective length maximum M, MA × 2 [ ! ] When T ≥ M × 3, tap pilot might not go through. |
| |||||||||||||||||||||||||||||||||||||||||
■Machining Limits
There are machining limits for thickness between hole and hole or between hole and end face.
(Example: "b" on the drawing below)
| Part Number | [M] Material | [S] Surface Treatment | |
| Type | Material Symbol | ||
| B Dim. Selectable (Flat Bars) HRMCA B Dim. Configurable (Width Configurable Flat Bars / Rolled Aluminum) HUMCA | SC | EN 1.1191 Equiv. (cold drawn) | — |
| SCB | Black Oxide | ||
| SCM | Electroless Nickel Plating | ||
| AM | EN AW-5052 Equiv. | — | |
| AMW | Anodize (Clear) | ||
| AMB | Anodize (Black) | ||
| SU | EN 1.4301 Equiv. | — | |
Specification Table
| Part Number | － | A | － | B | － | T | － | X | － | V | － | Y | － | W | － | Hole Specification (1) Code / Nominal Dia. | L | H | D | F | G | － | Hole Specification (2) Code / Nominal Dia. | |||||||
－ | － | － | － | － | ||||||||||||||||||||||||||
| Type | － | Material Symbol | ||||||||||||||||||||||||||||
HRMCA | － | SC | － | A80 | － | B50 | － | T6 | － | X10 | － | V60 | － | Y10 | － | W30 | － | M6 | － | L40 | － | H25 | － | D20 | － | F25 | － | G25 | － | NA6 |
HUMCA | － | AMB | － | A100 | － | B80 | － | T10 | － | X15 | － | V70 | － | Y15 | － | W50 | － | Z4 | － | L50 | － | H40 | － | D30 | － | F35 | － | G35 | － | ZB4 |
| Type | Part Number | 0.1 mm Increments | B | T | X | V | Y | W | Hole Specification (1) | L | H | D | F | G | Hole Specification (2) | |||
| Type | Material Symbol | A | Code | Nominal Dia. | Code | Nominal Dia. | ||||||||||||
B Dim. Selectable | HRMCA | SC SCB SCM | 25.0 to 200.0 | 16 22 25 32 38 50 60 75 100 125 | 6 9 (10) 12 16 19 | Configurable 0.1 mm Unit | N[ ! ] M Z[ ! ] [ ! ] For the machining dimensions, see Hole Type Selection Chart. | 0(No Hole) 3 4 5 6 8 10 12 14 16 | Configurable 0.1 mm Unit | 3 to 30 (0.5 mm Increments) 31 to 100 (1 mm Increments) | Configurable 0.1 mm Unit | NA[ ! ] MA ZF[ ! ] ZB[ ! ] [ ! ] For the machining dimensions, see Hole Type Selection Chart. | 0(No Hole) 3 4 5 6 8 10 12 14 16 | |||||
SU | 15 20 25 32 38 50 65 100 125 | |||||||||||||||||
B Dim. Configurable | HUMCA | SC SCB SCM SU | 25.0 to 200.0 | 15.0 to 150.0 (0.1 mm Increments) | 6 9 (10) 12 16 19 | |||||||||||||
AM AMW AMB | 10.0 to 200.0 (0.1 mm Increments) | 5 6 8 10 12 15 20 | ||||||||||||||||
| [ NG ]T10 is not selectable for SC(□) | [ NG ]For SU with B = 15, T10 to 19 are not selectable | |||||||||||||||||
| [ NG ]For SC(□) with B = 16 or 22, T19 is not selectable | [ NG ]For SU with B = 20, T19 is not selectable | |||||||||||||||||
Alteration
| Alterations | Corner Cut Change | Center Hole Change to H7 |
 |  | |
| Code | CC | DC |
| Spec. | Changes corner cuts. CC = 1 mm Increments [ ! ]1 ≤ CC ≤ 50 Specifying Method Add CC to the end of a Part Number. Example: ... -CC10 | Center hole D is changed to a precision hole (H7). DC = 1 mm Increments [ ! ]3 ≤ DC ≤ 100 Specifying Method Specify by replacing dim. D with DC (Example) ... -DC30 |
Part number list
Number of items
| Part number |
|---|
Unit price (excluding VAT)(Unit price including VAT) | Standard shipping days |
|---|
- ( - ) | 19 working days |
- ( - ) | 19 working days |
- ( - ) | 19 working days |
- ( - ) | 7 working days |
- ( - ) | 20 working days |
- ( - ) | 20 working days |
- ( - ) | 20 working days |
- ( - ) | 19 working days |
- ( - ) | 19 working days |
- ( - ) | 19 working days |
- ( - ) | 7 working days |
Catalog
Loading...