Configure
- Plate Thickness T
- 5
- 6
- 8
- 10
- 12
- 15
- External Dimension A(mm)[10-130/0.5mm units]
- External Dimension B(mm)[10-130/0.5mm units]
- External Dimension L(mm)[10-100/0.5mm units]
- CAD
- 2D
- 3D
- Est. shipping days
- All
- Within 7 working days
- Within 8 working days
- Within 10 working days
- Within 11 working days
L-Shaped Finishing Angle Mounting Plate / Bracket -Custom Dimensions Type- LAFWD
Part number:
possible part numbers found.Outline drawing and specifications table
Dimensional Drawing
Common Dimension
LAFWD
[ ! ] C0.2 to C0.5, unless otherwise specified
[ ! ] Hole pitch dimension tolerance conforms to JIS B 0405 Class m.
■Hole Type Selection Chart
■Machining Limits
There are machining limits for thickness between holes, and between hole and edge.
| Hole Type | Tapped Hole | Bolt Hole | Through Hole | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Code | M·MA | N・NA | D·DA | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Diagram , Code |  |  |  | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Machining Specifications | Effective Tap Length Max. M, MA × 2 |
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
■Machining Limits
There are machining limits for thickness between holes, and between hole and edge.
 | · b Conditional Values Unit: mm
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Part Number | Material | Surface Treatment | |
| Type | Material Symbol | ||
| LAFWD | SS | EN 1.0038 Equiv. | — |
| SSB | Black Oxide | ||
| SSM | Electroless Nickel Plating | ||
| AS | EN AW−6063 Equiv. | — | |
| ASW | Anodize (Clear) | ||
| ASB | Anodize (Black) | ||
| SU | EN 1.4301 Equiv. | — | |
| Long A, B sides | Perpendicularity K |
| 10 to 80 | Within 0.05 |
| 80.5 to 130 | Within 0.10 |
Specification Table
| Part Number | — | T | — | A | — | B | — | L | — | P | — | V | — | S | — | W | — | Hole Specification Code / Nominal Dia. | — | K | — | X | — | H | — | F | — | G | — | D | — | Hole Specification Code / Nominal Dia. | — | J | ||
| Type | — | Material Symbol | ||||||||||||||||||||||||||||||||||
| LAFSS | — | SS | — | T6 | — | A50 | — | B30 | — | L30 | — | S20 | — | N6 | — | H35 | — | NA6 | ||||||||||||||||||
| LAFDA | — | SS | — | T6 | — | A50 | — | B30 | — | L30 | — | V15 | — | S20 | — | N5 | — | H30 | — | F15 | — | NA5 | ||||||||||||||
[ ! ] Please make sure that all are half-size characters.
| Part Number | External Dimensions | P | V | S | Hole Specification | X | H | F | G | D | Hole Specification | ||||||
| Selection | 0.5 mm Increments | ||||||||||||||||
| Type | Material Symbol | T | A | B | L | Code | Nominal Dia. | Code | Nominal Dia. | ||||||||
| LAFWD | SS SSB SSM | 5 6 | 10.0 to 75.0 | 10.0 to 75.0 | 10.0 to 100.0 | 0.1 mm Increments | N M | 0 (No Hole) 3 4 5 6 8 10 12 For the machining dimensions, see Hole Type Selection Chart | 0.1 mm Increments | 3 to 30 (0.5 mm Increments) 31 to 60 (1 mm Increments) | NA MA | 0 (No Hole) 3 4 5 6 8 10 12 For the machining dimensions, see Hole Type Selection Chart | |||||
| 10 | 10.0 to 125.0 | 10.0 to 125.0 | |||||||||||||||
| 12 | 50.0 to 125.0 | 50.0 to 125.0 | 50.0 to 100.0 | ||||||||||||||
| 15 | 50.0 to 130.0 | 50.0 to 130.0 | |||||||||||||||
| AS ASW ASB | 5 6 | 10.0 to 75.0 | 10.0 to 75.0 | 10.0 to 100.0 | |||||||||||||
| 10 | 10.0 to 100.0 | 10.0 to 100.0 | |||||||||||||||
| 12 | 50.0 to 125.0 | 50.0 to 125.0 | 50.0 to 100.0 | ||||||||||||||
| SU | 5·6·8 | 10.0 to 90.0 | 10.0 to 90.0 | 10.0 to 100.0 | |||||||||||||
Alteration
| Alterations | Corner Cut Change | D Hole tolerance change | Datum Surface Machining + D Hole Tolerance Alteration |
 |  |  | |
| Code | CC | DC | DFC |
| Spec. | CC = 1 mm Increments [ ! ]1 ≤ CC ≤ 30 Specifying Method Add CC to the end of a Part Number. Example: ... -CC10 | Center hole D is changed to a precision hole (H7). DC = 1 mm Increments [ ! ]3 ≤ DC ≤ 30 Specifying Method Specify by replacing dim. D with DC (Example) ... -DC20 [ ! ] Applicable only to LAFWD | Center hole D is changed to a precision hole (H7). The datum dim. X has ±0.02 tolerance. DFC = 1 mm Increments [ ! ]3 ≤ DFC ≤ 30 Specifying Method Specify by replacing dim. D with DFC (Example) ... -DFC20 [ ! ] Applicable only to LAFWD |
Part number list
Number of items
| Part number |
|---|
Unit price (excluding VAT)(Unit price including VAT) | Standard shipping days |
|---|
- ( - ) | 7 working days |
- ( - ) | 7 working days |
- ( - ) | 7 working days |
- ( - ) | 7 working days |
- ( - ) | 11 working days |
- ( - ) | 11 working days |
- ( - ) | 11 working days |
- ( - ) | 11 working days |
- ( - ) | 11 working days |
- ( - ) | 11 working days |
- ( - ) | 11 working days |
- ( - ) | 11 working days |
- ( - ) | 8 working days |
- ( - ) | 8 working days |
- ( - ) | 8 working days |
- ( - ) | 8 working days |
- ( - ) | 8 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 10 working days |
- ( - ) | 7 working days |
- ( - ) | 7 working days |
- ( - ) | 7 working days |
More Information
Basic information
Outline and specifications
Specifications/Overview
Green colored parameters can be omitted.
If the parameter setting is omitted, the holes will be evenly distributed about the center.
If the parameter setting is omitted, the holes will be evenly distributed about the center.
