- Screw Dia. M (after insertion)(mm)
- 2
- 3
- 4
- 5
- 6
- 8
- Length L (after insertion) (D = Thread Dia. M)
- 3.0
- 3.5
- 4.0
- 4.5
- 5.0
- 5.5
- 6.0
- 6.5
- 8.0
- 11.0
- Pitch(mm)
- 0.4
- 0.5
- 0.7
- 0.8
- 1.0
- 1.25
- Length L(mm)
- 2.0
- 3.0
- 4.0
- 4.8
- 5.0
- 5.8
- 6.0
- 7.0
- 8.0
- 9.0
- 13.0
- Type
- CAD
- 2D
- 3D
- Est. shipping days
- All
- Within 5 working days
Bit Insert
Caution
- It is recommended to purchase the inserts individually and test and verify them before deciding where to insert them.
- Body material: EN CW614N Equiv.
- Compatible mating material: Thermoplastic resin.
Part number:
possible part numbers found.Outline drawing and specifications table
Dimensional Drawing
| Type | Bit Type | [M] Material |
| MBIS | Standard (Single-Side Type) | EN CW614N Equiv. |
Specification Table
| Part Number |
| MBIS2－3－3 |
| Part Number | M (Thread Dia.) × Pitch | D1 | D2 | L (Length) | |
| Type | No. | ||||
| MBIS Bit Inserts | 2－3－2 | M2 × 0.4 | 3.0 | 3.3 | 2.0 |
| 2－3－3 | 3.0 | 3.3 | 3.0 | ||
| 2－3－4 | 3.0 | 3.3 | 4.0 | ||
| 2－3－6 | 3.0 | 3.3 | 6.0 | ||
| 2－3－8 | 3.0 | 3.3 | 8.0 | ||
| 2－3.5－3 | 3.5 | 3.8 | 3.0 | ||
| 2－4－6 | 4.0 | 4.3 | 6.0 | ||
| 2－4－7 | 4.0 | 4.3 | 7.0 | ||
| 3－4.5－2 | M3 × 0.5 | 4.5 | 4.8 | 2.0 | |
| 3－4.5－3 | 4.5 | 4.8 | 3.0 | ||
| 3－4.5－4 | 4.5 | 4.8 | 4.0 | ||
| 3－4.5－4.8 | 4.5 | 4.8 | 4.8 | ||
| 3－4.5－5 | 4.5 | 4.8 | 5.0 | ||
| 3－4.5－6 | 4.5 | 4.8 | 6.0 | ||
| 3－4.5－7 | 4.5 | 4.8 | 7.0 | ||
| 3－4.5－8 | 4.5 | 4.8 | 8.0 | ||
| 3－5－4 | 5.0 | 5.3 | 4.0 | ||
| 3－5－5 | 5.0 | 5.3 | 5.0 | ||
| 3－5－6 | 5.0 | 5.3 | 6.0 | ||
| 3－5.5－4 | 5.5 | 5.8 | 4.0 | ||
| Part Number | M (Thread Dia.) × Pitch | D1 | D2 | L (Length) | |
| Type | No. | ||||
| MBIS Bit Inserts | 4－5.5－3 | M4 × 0.7 | 5.5 | 5.8 | 3.0 |
| 4－5.5－4 | 5.5 | 5.8 | 4.0 | ||
| 4－5.5－5 | 5.5 | 5.8 | 5.0 | ||
| 4－5.5－5.8 | 5.5 | 5.8 | 5.8 | ||
| 4－5.5－6 | 5.5 | 5.8 | 6.0 | ||
| 4－5.5－7 | 5.5 | 5.8 | 7.0 | ||
| 4－5.5－8 | 5.5 | 5.8 | 8.0 | ||
| 4－5.5－9 | 5.5 | 5.8 | 9.0 | ||
| 4－6－6 | 6.0 | 6.3 | 6.0 | ||
| 4－6－8 | 6.0 | 6.3 | 8.0 | ||
| 4－6.5－6 | 6.5 | 6.8 | 6.0 | ||
| 4－6.5－7 | 6.5 | 6.8 | 7.0 | ||
| 5－6.5－8 | M5 × 0.8 | 6.5 | 6.8 | 8.0 | |
| 5－8－5 | 8.0 | 8.3 | 5.0 | ||
| 5－8－9 | 8.0 | 8.3 | 9.0 | ||
| 6－8－6 | M6 × 1.0 | 8.0 | 8.3 | 6.0 | |
| 6－8－9 | 8.0 | 8.3 | 9.0 | ||
| 6－8－13 | 8.0 | 8.3 | 13.0 | ||
| 8－11－13 | M8 × 1.25 | 11.0 | 11.3 | 13.0 | |
App. Example
■ App. Example
(1)
(2)
(3)
Set on mating material
Press fitting or thermal press fitting
Completed
■How to Select Mating Material
Mating material
B → Insert D1 Dia. + Approximately 0.05 mm
C → Insert L Dimension + 0.2 mm or more
0.5 mm or more at thermal press fitting
■Precautions for Press Fitting
(1) In press fitting an insert, force is applied from the top of the mating hub, so make sure to increase O.D. to avoid cracking.
(2) When O.D. cannot be increased, thermal press fitting is available to prevent cracking.
(3) Place a punch or plate on the insert to avoid scratching it, then hammer it from above for insertion.
* Reference heating temperature: 200 to 250°C is recommended.
■ Precautions for Use
The insert will come off when a soft object such as a gasket is tightened.
When the tightened object is larger than O.D. of the insert, the insert will come off.
If the pilot hole of the mating material is too large.
| Mating Resin | Strength | M3 MBIS3－4.5－7 | M4 MBIS4－5.5－9 | M5 MBIS5－6.5－8 | M6 MBIS6－8－9 |
| ABS | Torque (N⋅m) | 1.8 | 2.5 | 4.2 | 5.1 |
| Tension (N) | 559 | 765 | 1177 | 1765 | |
| Noryl | Torque (N⋅m) | 1.9 | 3.0 | 5.0 | 6.8 |
| Tension (N) | 618 | 981 | 1471 | 1765 | |
| Polycarbonate | Torque (N⋅m) | 2.0 | 3.0 | 5.2 | 6.4 |
| Tension (N) | 883 | 1177 | 1520 | 1814 |
Part number list
| Part number |
|---|
Unit price (excluding VAT)(Unit price including VAT) | Standard shipping days |
|---|
0.51 € ( 0.61 € ) | 5 working days |
0.42 € ( 0.50 € ) | 5 working days |
0.42 € ( 0.50 € ) | 5 working days |
0.42 € ( 0.50 € ) | 5 working days |
1.01 € ( 1.20 € ) | 5 working days |
0.42 € ( 0.50 € ) | 5 working days |
1.01 € ( 1.20 € ) | 5 working days |
0.42 € ( 0.50 € ) | 5 working days |
0.42 € ( 0.50 € ) | 5 working days |
0.31 € ( 0.37 € ) | 5 working days |
0.42 € ( 0.50 € ) | 5 working days |
0.42 € ( 0.50 € ) | 5 working days |
0.42 € ( 0.50 € ) | 5 working days |
0.31 € ( 0.37 € ) | 5 working days |
0.51 € ( 0.61 € ) | 5 working days |
0.51 € ( 0.61 € ) | 5 working days |
1.01 € ( 1.20 € ) | 5 working days |
0.51 € ( 0.61 € ) | 5 working days |
0.51 € ( 0.61 € ) | 5 working days |
1.01 € ( 1.20 € ) | 5 working days |
0.51 € ( 0.61 € ) | 5 working days |
0.51 € ( 0.61 € ) | 5 working days |
0.51 € ( 0.61 € ) | 5 working days |
0.51 € ( 0.61 € ) | 5 working days |
0.51 € ( 0.61 € ) | 5 working days |
0.51 € ( 0.61 € ) | 5 working days |
0.51 € ( 0.61 € ) | 5 working days |
0.56 € ( 0.67 € ) | 5 working days |
0.56 € ( 0.67 € ) | 5 working days |
0.63 € ( 0.75 € ) | 5 working days |
1.01 € ( 1.20 € ) | 5 working days |
1.01 € ( 1.20 € ) | 5 working days |
0.63 € ( 0.75 € ) | 5 working days |
1.01 € ( 1.20 € ) | 5 working days |
0.84 € ( 1.00 € ) | 5 working days |
0.84 € ( 1.00 € ) | 5 working days |
0.84 € ( 1.00 € ) | 5 working days |
1.01 € ( 1.20 € ) | 5 working days |
1.68 € ( 2.00 € ) | 5 working days |
More Information
Basic information
·Bit insert is a general-purpose type insert nut that is low cost and easy to handle. It also has excellent holding power.
Caution
- It is recommended to purchase the inserts individually and test and verify them before deciding where to insert them.
- Body material: EN CW614N Equiv.
- Compatible mating material: Thermoplastic resin.