[Clean & Pack]Sprockets 35B

	Shaft Bore Spec. S	Shaft Bore Spec. N
	(Rough Machining)	(New JIS Key + Tap)

[ ! ] Offset between tooth tip and keyway is ±0.5 mm

Type	[M] Material	Cleaning Method
		Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-SSP35B	EN 1.4301 Equiv.	Degreasing	General environment	Anti-rust packing	General environment
SH-SSP35B		Precision cleaning	Class 1,000*	Degassing double packing	Class 10**
SHD-SSP35B		Electrolytic polishing + precision cleaning

*US FED STD 209E, ISO 14644-1 ISO 6 Equiv.
**US FED STD 209E, ISO 14644-1 ISO 4 Equiv.
[ ! ] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the specification table.
[A]Accessories: Two set screws are included. (Only for shaft bore specification [N])
* The S-type shaft bore dia. values ​​are for reference only and actual values may be smaller by 1 mm. (provided with a pilot hole)
* Machine key not included. Please purchase separately if necessary.

[ ! ] The following products have a different set screw size.

Applicable specifications	Set Screw
	M (Coarse)	Pitch
Nominal: 35, Number of teeth: 17, Shaft diameter: 25	6	1.0
Nominal: 40, Number of teeth: 14, Shaft diameter: 25	6	1.0
Nominal: 40, Number of teeth: 15, Shaft diameter: 30	6	1.0
Nominal: 50, Number of teeth: 11 to 13, Shaft diameter: 24 or more	6	1.0

·The set screw is included only for shaft hole specification N.

				Working Environment: Class 1,000*				Working Environment: Class 10**
Hydrocarbon cleaningRo water cleaning		Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water)		Use pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10** clean environment

*US FED STD 209E, ISO 14644-1 ISO 6 Equiv.
**US FED STD 209E, ISO 14644-1 ISO 4 Equiv.

						Working Environment: Class 1,000*				Working Environment: Class 10**
Hydrocarbon cleaning Ro water cleaning		Electrolytic polishing with an electrolytic polishing layer　according to the material		Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water)		Use warm pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10** clean environment

*US FED STD 209E, ISO 14644-1 ISO 6 Equiv.
**US FED STD 209E, ISO 14644-1 ISO 4 Equiv.

Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Possible applications
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Regular assembly process
					Post battery assembly process
Precision cleaning	SH-□□	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000*)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
Electrolytic polishing + precision cleaning	SHD-□□	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000*)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.