D-sub Connector Panel Mounting Accessory (Dedicated for Gender Changer)

D-sub Connector Panel Mounting Accessory (Dedicated for Gender Changer)

Click on this image to zoom in.

Click on this image to zoom in.

  • Volume Discount
[Specifications]·An accessory that can be mounted on panels with a thickness of 2.3 mm · Compatible with 9- and 25-core cables commonly used in RS232C communication.

● Accessory can mount a gender changer to panels
● Supports both general purpose 9-core and 25-core through RS-232C communication
● Supports up to 2.3 mm panel thickness 

· Depending on hood type, 2.3 mm panel thickness may not be supported.
· The gender changer in the product photo is not included.
· Refer to the following outer diameter drawing for panel cut dimensions. In addition, cut dimensions vary depending on the number of cores.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Specification Table

 
ModelSupported Number of Cores
( ) is High Density Type
Weight
g
DGC-9-HOLD9 (15)6
DGC-25-HOLD257

Overview of Specifications

Material/Finishing
ItemQuantityMaterial
Resin Plate2ABS Resin, Black
M3 SEMS Screw 15 mm
(Effective Screw Length Approx. 13 mm)
2Iron, Nickel Plating
M3 Nut2Iron, Nickel Plating
Part Number
DGC-9-HOLD
DGC-25-HOLD
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSNumber of Cores
(Core)

3.81 €

2 Available 5 Days 109 (15)

7.41 €

1 Available 5 Days 1025

Loading...

  1. 1

Usage Example

D-sub Connector Panel Mounting Accessory (Dedicated for Gender Changer): Related Image

Compatible Wire Size

Connector TypeCompatible Wire Size
AWG SizeConductor Cross-Sectional Area (mm2)
Solder Connection TypeFiner than 20Less than 0.53
Pressure Weld Connection Type1.27 mm Pitch 28 Flat Cable
High-density Solder Connection Type22 ~ 280.08 ~ 0.32
Terminal Block Built in Type14 ~ 262.0 ~ 1.5
High Current TypeFor 10A16 ~ 120.3 ~ 1.25
For 20A12 ~ 180.75 ~ 3.5
・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.

Panel Size

Solder Connection / Pressure Weld Connection Type
● Dimension Table
Number of CoresA±0.15B±0.2C±0.2
High Current TypeHigh-density typeOthers
-15924.9920.612.0
3261533.3228.812.0
5442547.0442.612.0
8623763.5059.012.0
-785061.1156.615.2
Mounting holes for panel front and rear mounting are common.

Pressure Weld Connection Type

a. Dimensions when mounting the connector from panel front
● Dimension Table
Number of CoresA1B1
924.9922.00
1533.3230.30
2547.0444.00
3763.0560.50
b. Dimensions when mounting the connector from panel rear
● Dimension Table
Number of CoresA2B2
924.9920.20
1533.3228.60
2547.0442.50
3763.0559.20

Contact Arrangement Diagram

Shell Size GroupEABCD
Standard Type
High-density type

Basic information

Type Connector Fastener Color Black Color Black

Tech Support