● EI connectors are compact nylon connectors with 2.5 mm pitch between contacts, compatible with the miniaturization of various electronic devices.
● Housings are packed with excellent built-in mechanisms such as a locking mechanism for connecting, directionality to prevent insertion error, and guides to prevent pitch misalignment for connecting.
● Available in a variety of styles ranging from relay to print board mounts and can be used in a wide range of applications.
● Dedicated Tool for EI Connectors
Configure
- Applicable pin/contact
- Application
- Est. shipping days
- All
- Within 5 working days
EI Connector Contact【100 pieces】
Part number:
possible part numbers found.Product specifications
Specifications
1 Pack Unit 100-piece Pack
| Model Number | Type | Compatible Wire Size | ||
| AWG | Conductor Cross-sectional Area (mm 2) | Insulation OD (Ø mm) | ||
| 170430-1 | Male (Pin) | 30 ~ 26 | 0.05 ~ 0.15 | 1.0 ~ 1.4 |
| 170429-1 | 26 ~ 20 | 0.14 ~ 0.52 | 1.1 ~ 1.9 | |
| 170205-1 | Female (Socket) | 30 ~ 26 | 0.05 ~ 0.15 | 1.0 ~ 1.4 |
| 170204-1 | 26 ~ 20 | 0.14 ~ 0.52 | 1.1 ~ 1.9 | |
More Information
More Information
Basic information
Small diameter wire, minimum AWG30, for contact support. 1 pack contains 100 pieces
● Contact that can be incorporated into EI connectors with removed pin headers.
● Weight: 0.1 g
● Manufacturer: Tyco Electronics
·Q uantity: 100 pcs. / pack. Please note.
· It cannot be incorporated with other products.
· We offer crimping tools dedicated for EI connectors.
Common specifications
EI
Features
Common Specifications
Materials / Finish
| Item | Materials | Finish |
|---|---|---|
| Housing | Nylon 66 | UL 94 V-0 class, natural color |
| Contact | Brass | Tin-plated |
Compatible Wire
| AWG | Conductor Section Area mm2 | Sheath Outer Diameter φ (mm) | |
|---|---|---|---|
| Size | 30 ~ 20 | 0.05 ~ 0.52 | 1.0 ~ 1.9 |
Specifications
| Item | Contents |
|---|---|
| Rated Current | 2 A or less (With AWG30), 5 A or less (With AWG20) |
| Rated Voltage | 250 VAC or less (350 VDC or less) |
| Withstand Voltage | 750 VAC / minute |
| Insulation Resistance | 500 MΩ or higher / 500 VDC |
| Contact Resistance | 10 mΩ or less |
| Operating Temperature | -20°C ~ +95°C (Temperature rise of 30°C or less) |
About the Maximum Allowable Temperature
The maximum allowable temperature for the product is between -20°C and +95°C, governed by the maximum allowable temperatures for housing and tin plated contact. It is calculated by the following formula, adding the temperature rise due to used current for the contact part and the ambient temperature due to the operating environment. Maximum temperature limit = temperature rise + ambient temperature, where the temperature rise for each wire is 30°C. Select wire size, type, and current value from Figure 1. For instance, if the ambient temperature is 20°C , then the current is allowable until the temperature reaches 50°C. Note that the current capacity decreases as the number of cores increases because the rate of temperature rise increases accordingly. Please be careful.
About Coupling
