AS Coated High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
-High-speed roughing cutter made of steel, which offers both good machining performance and good price
-The coating has high oxidation resistance and high hardness, and has a long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
- AS
- 3 Flutes
- S (Short)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| AS-RFPLS6 |
| AS-RFPLS8 |
| AS-RFPLS10 |
| AS-RFPLS12 |
| AS-RFPLS14 |
| AS-RFPLS16 |
| AS-RFPLS18 |
| AS-RFPLS20 |
| AS-RFPLS22 |
| AS-RFPLS25 |
| AS-RFPLS30 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Corner Chamfering C (mm) | Tolerance (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
37.78 € | 1 | Available | 5 Days | 6 | 11 | 3 | 6 | 80 | - | ±0.060 | |
34.97 € | 1 | Available | 5 Days | 8 | 17 | 3 | 8 | 85 | - | ±0.075 | |
41.83 € | 1 | Available | 5 Days | 10 | 22 | 3 | 10 | 100 | - | ±0.075 | |
65.41 € | 1 | Available | 5 Days | 12 | 26 | 3 | 12 | 110 | 0.2 ~ 0.7 | ±0.090 | |
77.76 € | 1 | Available | 5 Days | 14 | 26 | 3 | 12 | 110 | 0.2 ~ 0.7 | ±0.090 | |
87.76 € | 1 | Available | 5 Days | 16 | 32 | 3 | 16 | 125 | 0.2 ~ 0.7 | ±0.090 | |
101.45 € | 1 | Available | 5 Days | 18 | 32 | 3 | 16 | 125 | 0.2 ~ 0.7 | ±0.090 | |
91.73 € | 1 | Available | 5 Days | 20 | 38 | 3 | 20 | 140 | 0.2 ~ 0.7 | ±0.105 | |
125.11 € | 1 | Available | 5 Days | 22 | 38 | 3 | 20 | 140 | 0.2 ~ 0.7 | ±0.105 | |
96.26 € | 1 | Available | 5 Days | 25 | 45 | 4 | 25 | 160 | 0.2 ~ 0.7 | ±0.105 | |
155.00 € | 1 | Available | 5 Days | 30 | 45 | 4 | 25 | 160 | 0.2 ~ 0.7 | ±0.105 |
Loading...
Specifications
Model Number
AS-RFPLS
| Outer Diameter D |
Flute Length ℓ |
Overall Length L |
Under Neck Angle θ |
Shank Diameter d |
Corner Chamfering C |
Number of Flutes Z |
| 6 | 11 | 80 | — | 6 | — | 3 |
| 8 | 17 | 85 | — | 8 | — | 3 |
| 10 | 22 | 100 | — | 10 | — | 3 |
| 12 | 26 | 110 | — | 12 | 0.2 ~ 0.7 | 3 |
| 14 | 26 | 110 | — | 12 | 0.2 ~ 0.7 | 3 |
| 15 | 26 | 120 | 15° | 16 | 0.2 ~ 0.7 | 3 |
| 16 | 32 | 125 | — | 16 | 0.3 ~ 0.9 | 3 |
| 18 | 32 | 125 | — | 16 | 0.3 ~ 0.9 | 3 |
| 20 | 38 | 140 | — | 20 | 0.3 ~ 0.9 | 3 |
| 22 | 38 | 140 | — | 20 | 0.3 ~ 0.9 | 3 |
| Outer Diameter D |
Flute Length ℓ |
Overall Length L |
Under Neck Angle θ |
Shank Diameter d |
Corner Chamfering C |
Number of Flutes Z |
| 25 | 45 | 160 | — | 25 | 0.3 ~ 0.9 | 4 |
| 28 | 45 | 160 | — | 25 | 0.3 ~ 0.9 | 4 |
| 30 | 45 | 160 | — | 25 | 0.3 ~ 0.9 | 4 |
For Cutting Conditions, Refer to >>Click here.
Basic information
| Work Material | General Steel / Heat-Treated Steel / Cast Iron / Aluminum / Copper | Type of Flute | Roughing | Tool Material Type | Cobalt High-Speed Steel |
|---|---|---|---|---|---|
| Processing Applications | Flat Surface / Side Surface / Groove / Inclined Cutting | Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Standard Helix (30 to 40°) |
| Base-Blade Availability | Included |
Configure
Basic Attributes
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Number of Flutes(sheet)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Type
- AS-RFPLS
Filter by standard shipping days
-
- All
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.