Plain bearing bushes with flange / plastic (iglidur) / XFM (Part Numbers - CAD Download)
- Promotional pricing ends 31/12/2024
- Volume Discount
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
iglidur® X | The Chemical and Temperature Specialist, Flange Bearing (Form F)
Product Information
Up to 150 MPa static
iglidur® X is defined by its combination of high temperature resistance with compressive strength, along with high resistance to chemicals. iglidur® X is designed for higher speeds than other iglidur® bearings.
When to use it?
• For pressure loads up to 150 MPa
• For linear movements with stainless steel at high temperatures
• Universal resistance to chemicals
• Temperature resistant from –100 °C to +250 °C in continuous operation (short-term to +315 °C)
• Very low moisture absorption
• High wear resistance over the entire temperature range
When not to use it?
• For very low wear at high loads
►iglidur® Q
►iglidur® Z
• For economical underwater applications
►iglidur® H
►iglidur® H370
• For edge pressure
►iglidur® Z
Typical application areas
• Beverage technology
• Woodworking
• Plastic processing industry
• Aerospace engineering
• Cleanroom
Material Properties
| General properties | Unit | iglidur® X | Testing method |
| Density | g/cm3 | 1.44 | |
| Colour | black | ||
| Max. moisture absorption at +23 °C/50 % r.h. | % weight | 0.1 | DIN 53495 |
| Max. water absorption | % weight | 0.5 | |
| Coefficient of sliding friction, dynamic, against steel | μ | 0.09–0.27 | |
| pv value, max. (dry) | MPa · m/s | 1.32 | |
| Mechanical properties | |||
| Flexural modulus | MPa | 8,100 | DIN 53457 |
| Flexural strength at +20 °C | MPa | 170 | DIN 53452 |
| Compressive strength | MPa | 100 | |
| Max. recommended surface pressure (+20 °C) | MPa | 150 | |
| Shore-D hardness | 85 | DIN 53505 | |
| Physical and thermal properties | |||
| Max. long-term application temperature | °C | +250 | |
| Max. short-term application temperature | °C | +315 | |
| Min. long-term application temperature | °C | –100 | |
| Heat conductivity | W/m · K | 0.6 | ASTM C 177 |
| Coefficient of thermal expansion (at +23 °C) | K–1 · 10–5 | 5 | DIN 53752 |
| Electrical properties5) | |||
| Specific contact resistance | Ωcm | < 105 | DIN IEC 93 |
| Surface resistance | Ω | < 103 | DIN 53482 |
Dimensions
2) Thickness < 1 mm: chamfer = 20°
| Chamfer in relation to the d1 | ||||
| d1 [mm]: | Ø 1–6 | Ø 6–12 | Ø 12–30 | Ø > 30 |
| f [mm]: | 0.3 | 0.5 | 0.8 | 1.2 |
Dimensions [mm]
| d1 | d1- | d2 | d3 | b1 | b2 | Part No. |
| Tolerance3) | d13 | h13 | –0.14 | |||
| 2.0 | +0.006 +0.046 | 4.0 | 6.0 | 3.0 | 1.0 | XFM-020406-03 |
| 3.0 | 4.5 | 7.5 | 5.0 | 0.75 | XFM-0304-05 | |
| 4.0 | +0.010 +0.058 | 5.5 | 9.5 | 4.0 | 0.75 | XFM-0405-04 |
| 4.0 | 5.5 | 9.5 | 6.0 | 0.75 | XFM-0405-06 | |
| 4.0 | 5.5 | 8.0 | 6.0 | 0.75 | XFM-040508-06 | |
| 5.0 | 7.0 | 11.0 | 5.0 | 1.0 | XFM-0507-05 | |
| 6.0 | 8.0 | 12.0 | 4.0 | 1.0 | XFM-0608-04 | |
| 6.0 | 8.0 | 12.0 | 8.0 | 1.0 | XFM-0608-08 | |
| 6.0 | 8.0 | 12.0 | 10.0 | 1.0 | XFM-0608-10 | |
| 8.0 | +0.013 +0.071 | 10.0 | 15.0 | 5.5 | 1.0 | XFM-0810-05 |
| 8.0 | 10.0 | 15.0 | 7.5 | 1.0 | XFM-0810-07 | |
| 8.0 | 10.0 | 15.0 | 8.0 | 1.0 | XFM-0810-08 | |
| 8.0 | 10.0 | 15.0 | 9.0 | 1.0 | XFM-0810-09 | |
| 8.0 | 10.0 | 12.0 | 4.0 | 1.0 | XFM-081012-04 | |
| 8.0 | 10.0 | 14.0 | 31.5 | 1.0 | XFM-081014-31 | |
| 9.0 | 11.0 | 15.0 | 18.0 | 0.5 | XFM-0911-18 | |
| 10.0 | 12.0 | 18.0 | 5.0 | 1.0 | XFM-1012-05 | |
| 10.0 | 12.0 | 18.0 | 6.0 | 1.0 | XFM-1012-06 | |
| 10.0 | 12.0 | 18.0 | 7.0 | 1.0 | XFM-1012-07 | |
| 10.0 | 12.0 | 15.0 | 8.0 | 1.0 | XFM-1012-08 | |
| 10.0 | 12.0 | 18.0 | 9.0 | 1.0 | XFM-1012-09 | |
| 10.0 | 12.0 | 18.0 | 12.0 | 1.0 | XFM-1012-12 | |
| 10.0 | 12.0 | 18.0 | 15.0 | 1.0 | XFM-1012-15 | |
| 10.0 | 12.0 | 18.0 | 17.0 | 1.0 | XFM-1012-17 | |
| 10.0 | 12.0 | 18.0 | 18.0 | 1.0 | XFM-1012-18 | |
| 10.0 | 12.0 | 15.0 | 22.0 | 1.0 | XFM-1012-22 | |
| 10.0 | 12.0 | 18.0 | 25.0 | 1.0 | XFM-1012-25 | |
| 12.0 | +0.016 +0.086 | 14.0 | 20.0 | 5.5 | 1.0 | XFM-1214-055 |
| 12.0 | 14.0 | 20.0 | 7.0 | 1.0 | XFM-1214-07 | |
| 12.0 | 14.0 | 20.0 | 9.0 | 1.0 | XFM-1214-09 | |
| 12.0 | 14.0 | 20.0 | 12.0 | 1.0 | XFM-1214-12 | |
| 12.0 | 14.0 | 20.0 | 15.0 | 1.0 | XFM-1214-15 | |
| 12.0 | 14.0 | 20.0 | 17.0 | 1.0 | XFM-1214-17 | |
| 12.0 | 14.0 | 18.0 | 3.9 | 1.0 | XFM-121418-039 | |
| 12.0 | +0.016 +0.086 | 14.0 | 18.0 | 5.9 | 1.0 | XFM-121418-059 |
| 14.0 | 16.0 | 22.0 | 10.0 | 1.0 | XFM-1416-10 | |
| 14.0 | 16.0 | 22.0 | 12.0 | 1.0 | XFM-1416-12 | |
| 14.0 | 16.0 | 22.0 | 17.0 | 1.0 | XFM-1416-17 | |
| 15.0 | 17.0 | 23.0 | 6.0 | 1.0 | XFM-1517-06 | |
| 15.0 | 17.0 | 23.0 | 9.0 | 1.0 | XFM-1517-09 | |
| 15.0 | 17.0 | 23.0 | 12.0 | 1.0 | XFM-1517-12 | |
| 15.0 | 17.0 | 23.0 | 17.0 | 1.0 | XFM-1517-17 | |
| 16.0 | 18.0 | 24.0 | 12.0 | 1.0 | XFM-1618-12 | |
| 16.0 | 18.0 | 24.0 | 17.0 | 1.0 | XFM-1618-17 | |
| 18.0 | 20.0 | 26.0 | 12.0 | 1.0 | XFM-1820-12 | |
| 18.0 | 20.0 | 26.0 | 17.0 | 1.0 | XFM-1820-17 | |
| 18.0 | 20.0 | 26.0 | 22.0 | 1.0 | XFM-1820-22 | |
| 20.0 | +0.020 +0.104 | 23.0 | 30.0 | 6.5 | 1.5 | XFM-2023-065 |
| 20.0 | 23.0 | 30.0 | 7.5 | 1.5 | XFM-2023-075 | |
| 20.0 | 23.0 | 30.0 | 11.0 | 1.5 | XFM-2023-11 | |
| 20.0 | 23.0 | 30.0 | 16.5 | 1.5 | XFM-2023-16 | |
| 20.0 | 23.0 | 30.0 | 21.0 | 1.5 | XFM-2023-21 | |
| 25.0 | 28.0 | 35.0 | 11.5 | 1.5 | XFM-2528-11 | |
| 25.0 | 28.0 | 35.0 | 13.5 | 1.5 | XFM-2528-13 | |
| 25.0 | 28.0 | 35.0 | 16.5 | 1.5 | XFM-2528-16 | |
| 25.0 | 28.0 | 35.0 | 21.0 | 1.5 | XFM-2528-21 | |
| 25.0 | 28.0 | 33.0 | 8.0 | 1.0 | XFM-252833-08 | |
| 27.0 | 30.0 | 38.0 | 20.0 | 1.5 | XFM-2730-20 | |
| 30.0 | 34.0 | 42.0 | 16.0 | 2.0 | XFM-3034-16 | |
| 30.0 | 34.0 | 42.0 | 26.0 | 2.0 | XFM-3034-26 | |
| 30.0 | 34.0 | 42.0 | 40.0 | 2.0 | XFM-3034-40 | |
| 32.0 | +0.025 +0.125 | 36.0 | 45.0 | 15.0 | 2.0 | XFM-3236-15 |
| 32.0 | 36.0 | 45.0 | 26.0 | 2.0 | XFM-3236-26 | |
| 35.0 | 39.0 | 47.0 | 16.0 | 2.0 | XFM-3539-16 | |
| 35.0 | 39.0 | 47.0 | 26.0 | 2.0 | XFM-3539-26 | |
| 40.0 | 44.0 | 52.0 | 22.0 | 2.0 | XFM-4044-22 | |
| 40.0 | 44.0 | 52.0 | 30.0 | 2.0 | XFM-4044-30 | |
| 40.0 | 44.0 | 52.0 | 40.0 | 2.0 | XFM-4044-40 | |
| 45.0 | 50.0 | 58.0 | 50.0 | 2.0 | XFM-4550-50 | |
| 50.0 | 55.0 | 63.0 | 40.0 | 2.0 | XFM-5055-40 | |
| 60.0 | +0.030 +0.150 | 65.0 | 73.0 | 40.0 | 2.0 | XFM-6065-40 |
| 70.0 | 75.0 | 83.0 | 40.0 | 2.0 | XFM-7075-40 | |
| 75.0 | 80.0 | 88.0 | 50.0 | 2.0 | XFM-7580-50 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Type | Inner Diameter d1 (mm) | O.D. d2 (mm) | Overall Length b1 (mm) | Maximum Allowable PV Value Range (N/mm2•m/s) | Max. Allowable Velocity V (m/s) | Recommended Shaft Tolerance | Thickness t (mm) | Operating Temperature Range (°C) | Flange Outer Diameter d3 (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
5.06 € | 1 | Available |
Same day
Stock | 10 | Flanged Type | 2 | 4 | 3 | 1.1 to 2.0 | 1.5 | h9 | - | -100～250 | 6 | |
5.14 € | 1 | Available | 3 Days | 10 | Flanged Type | 3 | 4.5 | 5 | 1.1 to 2.0 | 1.5 | h9 | - | -100～250 | 7.5 | |
6.74 € | 1 | Available | 2 Days | 10 | Flanged Type | 4 | 5.5 | 6 | 1.1 to 2.0 | 1.5 | h9 | - | -100～250 | 8 | |
6.70 € | 1 | Available | 5 Days | 10 | Flanged Type | 4 | 5.5 | 4 | 1.1 to 2.0 | 1.5 | h9 | - | -100～250 | 9.5 | |
6.84 € 4.79 € | 1 | Available |
Same day
Stock | 10 | Flanged Type | 4 | 5.5 | 6 | 1.1 to 2.0 | 1.5 | h9 | - | -100～250 | 9.5 | |
6.94 € | 1 | Available |
Same day
Stock | 10 | Flanged Type | 5 | 7 | 5 | 1.1 to 2.0 | 1.5 | h9 | - | -100～250 | 11 | |
8.08 € | 1 | Available | 3 Days | 10 | Flanged Type | 6 | 8 | 20 | 1.1 to 2.0 | 1.5 | h9 | - | -100～250 | 12 | |
6.86 € | 1 | Available | 3 Days | 10 | - | 6 | 8 | 15 | - | 10 | - | 1 | - | - | |
7.08 € | 1 | Available | 3 Days | 10 | Flanged Type | 6 | 8 | 8 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 12 | |
6.24 € | 1 | Available | 3 Days | 10 | Flanged Type | 6 | 8 | 10 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 12 | |
6.84 € | 1 | Available |
Same day
Stock | 10 | Flanged Type | 8 | 10 | 4 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 12 | |
7.54 € | 1 | Available | 3 Days | 10 | Flanged Type | 8 | 10 | 31.5 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 14 | |
6.76 € | 1 | Available |
Same day
Stock | 10 | Flanged Type | 8 | 10 | 5.5 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 15 | |
6.96 € | 1 | Available | 3 Days | 10 | - | 8 | 10 | 15 | - | 10 | - | 1 | - | - | |
7.18 € | 1 | Available | 3 Days | 10 | Flanged Type | 8 | 10 | 8 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 15 | |
7.24 € | 1 | Available | 3 Days | 10 | Flanged Type | 8 | 10 | 9 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 15 | |
6.96 € | 1 | Available | 4 Days | 10 | Flanged Type | 8 | 10 | 7.5 | 1.1 to 2.0 | 1.5 | h9 | - | -100～250 | 15 | |
8.40 € 5.88 € | 1 | Available |
Same day
Stock | 10 | - | - | - | - | - | - | - | - | - | - | |
7.06 € | 1 | Available | 3 Days | 10 | - | 10 | 12 | 15 | - | 10 | - | 1 | - | - | |
7.08 € | 1 | Available | 3 Days | 10 | Flanged Type | 10 | 12 | 6 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 18 | |
7.16 € 5.01 € | 1 | Available |
Same day
Stock | 10 | - | 10 | 12 | 15 | - | 10 | - | 1 | - | - | |
5.84 € | 1 | Available |
Same day
Stock | 10 | Flanged Type | 10 | 12 | 8 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 15 | |
7.42 € | 1 | Available | 3 Days | 10 | Flanged Type | 10 | 12 | 9 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 18 | |
7.86 € | 1 | Available | 3 Days | 10 | - | 10 | 12 | 15 | - | 10 | - | 1 | - | - | |
8.18 € | 1 | Available | 3 Days | 10 | Flanged Type | 10 | 12 | 15 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 18 | |
8.34 € 5.84 € | 1 | Available |
Same day
Stock | 10 | - | 10 | 12 | 15 | - | 10 | - | 1 | - | - | |
8.40 € | 1 | Available | 3 Days | 10 | Flanged Type | 10 | 12 | 18 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 18 | |
8.78 € | 1 | Available | 3 Days | 10 | Flanged Type | 10 | 12 | 22 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 18 | |
9.24 € 6.47 € | 1 | Available |
Same day
Stock | 10 | - | 10 | 12 | 15 | - | 10 | - | 1 | - | - | |
7.62 € | 1 | Available | 3 Days | 10 | Flanged Type | 12 | 14 | 9 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 20 | |
7.54 € 5.28 € | 1 | Available |
Same day
Stock | 10 | Flanged Type | 12 | 14 | 5.5 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 20 | |
7.76 € | 1 | Available | 3 Days | 10 | Flanged Type | 12 | 14 | 12 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 20 | |
8.88 € | 1 | Available | 3 Days | 10 | Flanged Type | 12 | 14 | 15 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 20 | |
8.90 € | 1 | Available | 3 Days | 10 | - | 12 | 14 | 15 | - | 10 | - | 1 | - | - | |
7.54 € | 1 | Available |
Same day
Stock | 10 | Flanged Type | 12 | 14 | 3.9 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 18 | |
7.52 € | 1 | Available | 3 Days | 10 | Flanged Type | 12 | 14 | 5.9 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 18 | |
8.00 € | 1 | Available | 3 Days | 10 | Flanged Type | 14 | 16 | 10 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 22 | |
8.22 € 5.75 € | 1 | Available |
Same day
Stock | 10 | Flanged Type | 14 | 16 | 12 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 22 | |
8.30 € | 1 | Available |
Same day
Stock | 10 | Flanged Type | 14 | 16 | 17 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 22 | |
7.72 € | 1 | Available | 3 Days | 10 | Flanged Type | 15 | 17 | 6 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 23 | |
8.00 € | 1 | Available | 3 Days | 10 | - | 15 | 17 | 15 | - | 10 | - | 1 | - | - | |
8.30 € | 1 | Available | 3 Days | 10 | Flanged Type | 15 | 17 | 12 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 23 | |
8.42 € | 1 | Available | 3 Days | 10 | Flanged Type | 15 | 17 | 17 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 23 | |
8.44 € | 1 | Available | 3 Days | 10 | Flanged Type | 16 | 18 | 12 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 24 | |
8.50 € | 1 | Available | 3 Days | 10 | Flanged Type | 16 | 18 | 17 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 24 | |
8.70 € | 1 | Available | 3 Days | 10 | Flanged Type | 18 | 20 | 12 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 26 | |
8.74 € | 1 | Available | 3 Days | 10 | Flanged Type | 18 | 20 | 17 | 1.1 to 2.0 | 1.5 | h9 | 1 | -100～250 | 26 | |
8.82 € | 1 | Available | 3 Days | 10 | - | 18 | 20 | 15 | - | 10 | - | 1 | - | - | |
8.82 € 6.17 € | 1 | Available |
Same day
Stock | 10 | - | 20 | 23 | 15 | - | 10 | - | 1.5 | - | - | |
8.88 € | 1 | Available | 3 Days | 10 | Flanged Type | 20 | 23 | 7.5 | 1.1 to 2.0 | 1.5 | h9 | 1.5 | -100～250 | 30 | |
9.06 € | 1 | Available | 3 Days | 10 | Flanged Type | 20 | 23 | 11 | 1.1 to 2.0 | 1.5 | h9 | 1.5 | -100～250 | 30 | |
10.78 € | 1 | Available | 3 Days | 10 | Flanged Type | 20 | 23 | 16.5 | 1.1 to 2.0 | 1.5 | h9 | 1.5 | -100～250 | 30 | |
10.80 € | 1 | Available | 3 Days | 10 | Flanged Type | 20 | 23 | 21 | 1.1 to 2.0 | 1.5 | h9 | 1.5 | -100～250 | 30 | |
10.94 € 7.66 € | 1 | Available |
Same day
Stock | 10 | - | 25 | 28 | 15 | - | 10 | - | 1.5 | - | - | |
11.16 € | 1 | Available | 3 Days | 10 | Flanged Type | 25 | 28 | 13.5 | 1.1 to 2.0 | 1.5 | h9 | 1.5 | -100～250 | 35 | |
11.36 € | 1 | Available |
Same day
Stock | 10 | - | 25 | 28 | 15 | - | 10 | - | 1.5 | - | - | |
11.72 € | 1 | Available | 3 Days | 10 | Flanged Type | 25 | 28 | 21 | 1.1 to 2.0 | 1.5 | h9 | 1.5 | -100～250 | 35 | |
10.02 € | 1 | Available | 4 Days | 10 | Flanged Type | 25 | 28 | 8 | 1.1 to 2.0 | 1.5 | h9 | 1.5 | -100～250 | 33 | |
17.02 € | 1 | Available | 2 Days | - | Flanged Type | 27 | 30 | 20 | 1.1 to 2.0 | 1.5 | h9 | - | - | 38 | |
15.42 € | 1 | Available | 3 Days | - | Flanged Type | 30 | 34 | 16 | 1.1 to 2.0 | 1.5 | h9 | 2 | - | 42 |
Loading...
Basic information
| Resin Group | High Performance Polymer Group | Environment | Standard / Heat Resistant / Foreign Object Resistant / Vibration Resistant / In Oil / In Water / In Seawater / In Chemical | Maximum Allowable PV Value(N/mm²·m/s) | 1.32 |
|---|---|---|---|---|---|
| Max. Allowable Surface Pressure P(N/mm2) | 150 | Recommended Housing Hole Tolerance | H7 | Lubrication Condition | Unlubricated |
Configure
Stock
-
- Show only stock items
Basic Attributes
-
Type
-
Flanged Type
-
-
Inner Diameter d1(mm)
-
O.D. d2(mm)
-
Overall Length b1(mm)
-
Maximum Allowable PV Value Range(N/mm2•m/s)
- 1.1 to 2.0
-
Max. Allowable Velocity V(m/s)
-
Recommended Shaft Tolerance
- h9
-
Thickness t(mm)
-
Flange Outer Diameter d3(mm)
-
Type
- XFM
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- Same day
- 2 Days or Less
- 3 Days or Less
- 4 Days or Less
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.