Small X-Axis Rack-and-Pinion Stage TAR-X
[Features]
- Movement possible along X and the Y axis.
- Rack and pinion approach for quick feeding.
- Thin and compact, since there is no mounting spacer and it attaches directly to the main body.
- Movement possible along X and the Y axis.
- Rack and pinion approach for quick feeding.
- Thin and compact, since there is no mounting spacer and it attaches directly to the main body.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
TAR-2550X
Basic information
| Table Size (Length) L (Range Selectable)(mm) | 41 to 60 | Table Size (Width) W (Range Selectable)(mm) | Up to 25 | Load Capacity (Range Selectable)(N) | 30.1~50 |
|---|---|---|---|---|---|
| Stroke (Range Selectable) | ~ ±10mm | Feeding Method | Rack & Pinion | Table Material | Brass |
| Table Surface Treatment | LTBC Plating | Guiding Mechanism | Dovetail Groove | Table Size (Thickness) H (Range Selectable)(mm) | 20.1 to 25 |
| Category | Main Body | Table Size (Length) L(mm) | 50 | Table Size (Width) W(mm) | 25 |
| Allowable Load(N) | 39.2 | Stroke (X Distance)(mm) | ±10 | Table Size (Thickness) H(mm) | 22 |
| Type | X-Axis Stages | Table Straightness(µm) | 20 | Table Parallelism(µm) | 50 |
| Feed Knob Position | Holoaxial side | Clamp | Clamping Lever | Reversed | Standard |
| Through Hole (Table Center Hole) | Available | Feed method (rack & pinion type) | Standard |
This page is Small X-Axis Rack-and-Pinion Stage TAR-X, part number TAR-2550X.
You can find the detail information about specifications and dimensions on part number TAR-2550X.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.