Tie Duct Hose Anti-wear GL Type
A tie duct hose GL type hose with superior wear resistance that can be used at a wide range of temperatures from -30°C to 80°C. Also has an anti-static effect.
[Features]
· Has superior wear resistance and can be used in a wide variety of temperatures (approximately -30°C to 80°C).
Has superior conductivity and a static band prevention effect.
· Has superior weather resistance.
· Suited to the transport of powders and granular material, dust collection, and feeding high temperature exhaust.
[Features]
· Has superior wear resistance and can be used in a wide variety of temperatures (approximately -30°C to 80°C).
Has superior conductivity and a static band prevention effect.
· Has superior weather resistance.
· Suited to the transport of powders and granular material, dust collection, and feeding high temperature exhaust.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Product data
- CAD data not available
Part Number
|
|---|
| GLM-38-[1-30/1] |
| GLM-50-[1-30/1] |
| GLM-65-[1-30/1] |
| GLM-75-[1-30/1] |
| GLM-90-[1-30/1] |
| GLM-100-[1-30/1] |
| GLM-125-[1-20/1] |
| GLM-150-[1-20/1] |
| GLM-200-[1-20/1] |
| Part Number | Minimum order quantity | Volume Discount | Internal Diameter (mm) | Outer Diameter (mm) | Allowable Pressure(20°C) (MPa) | Allowable Bending Radius (mm) | Nominal diameter (φ) | Length (m) | |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 10 Days | 38.1 | 46 | 0.05 | 45 | 38 | 1 ～ 30 | ||
| 1 | 10 Days | 50.8 | 61.8 | 0.05 | 60 | 50 | 1 ～ 30 | ||
| 1 | 15 Days | 63.5 | 74.7 | 0.04 | 70 | 65 | 1 ～ 30 | ||
| 1 | 10 Days | 76.2 | 87.6 | 0.04 | 80 | 75 | 1 ～ 30 | ||
| 1 | 10 Days | 89.8 | 101.4 | 0.03 | 100 | 90 | 1 ～ 30 | ||
| 1 | 10 Days | 102.5 | 114.6 | 0.03 | 105 | 100 | 1 ～ 30 | ||
| 1 | 10 Days | 126 | 140.2 | 0.02 | 125 | 125 | 1 ～ 20 | ||
| 1 | 10 Days | 152 | 167 | 0.02 | 155 | 150 | 1 ～ 20 | ||
| 1 | 10 Days | 208 | 223 | 0.01 | 190 | 200 | 1 ～ 20 |
Loading...
Basic information
| Hose material | Synthetic rubber (EPDM) + Olefinic Resin | Cutting Service Usage | Available | Features | Abrasion Resistance / Heat-Resistance |
|---|---|---|---|---|---|
| Color | Black | Applicable Fluid | Powder / Grains / Air / Waste Paper | Operating Temperature Range(℃) | -30::80 |
Configure
Basic Attributes
-
Internal Diameter(mm)
-
Outer Diameter(mm)
-
Allowable Pressure(20°C)(MPa)
-
Nominal diameter(φ)
-
Length(m)
-
Type
- GLM
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.