Configure
- Stock
- Show stock items only
- Tip Material
- Body Material
- Outside Dia./Thread M(mm)
- 3
- 4
- 5
- 6
- 8
- 10
- 12
- Stroke S(mm)
- 0.55
- 0.6
- 0.7
- 0.8
- 1
- 1.4
- 1.6
- 1.8
- 1.9
- 2.4
- 3.3
- 4
- Loosening Prevention
- Main Body Surface Treatment
- Tip Heat Treatment
- Initial Load (Range)(N)
- Initial Load(N)
- 0.4
- 0.5
- 1.7
- 1.8
- 2.3
- 2.4
- 2.5
- 3
- 3.9
- 4
- 5
- 5.5
- 6
- 6.2
- 7
- 7.3
- 8
- 8.5
- 10
- 11
- 11.9
- 12
- 14
- 17
- 28
- d1
- 3
- 4
- 5
- 6
- 8
- 10
- 12
- d2(mm)
- 2
- 2.38
- 3
- 4
- 5
- 6.5
- 8
- 8.5
- 10
- d3(mm)
- 3.5
- 3.6
- 4.5
- 4.6
- 5.5
- 5.6
- 6.5
- 8.5
- 11
- 13
- l(mm)
- 4
- 5
- 6
- 7
- 9
- 13
- 13.5
- 16
- l1(mm)
- 4
- 5
- 6
- 7
- 9
- 13
- 16
- l3(mm)
- 0.6
- 0.9
- 1
- 1.1
- 1.5
- 2.3
- Temperature max.(°C)
- 50
- 250
- Temperature min.(°C)
- -30
- Location hole(mm)
- 3
- 4
- 5
- 6
- 8
- 10
- 12
- Spring Load type
- Type
- 22080
- CAD
- 3D
- Est. shipping days
- All
- Same-day shipping possible
- Within 2 working days
- Within 3 working days
- Within 4 working days
Spring Plungers, smooth, with collar and ball
Part number:
possible part numbers found.Product information
Spring Plungers • smooth, with collar and ball, EH 22080.
Product Description
 | Spring plungers can be used for locating or for applying pressure, as a detent or for ejection. |
Material
Body
• Stainless steel 1.4303
• Brass
• Thermoplastic POM, blue
Ball
• Stainless steel, hardened
• Thermoplastic POM, white
Spring
• Stainless steel
• Stainless steel 1.4303
• Brass
• Thermoplastic POM, blue
Ball
• Stainless steel, hardened
• Thermoplastic POM, white
Spring
• Stainless steel
Assembly
A tolerance of H7 is recommended for the locating hole of d1.
Characteristic
Light spring load: marked with one line
Standard spring load: no marking
Reinforced spring load: marked with two lines
Standard spring load: no marking
Reinforced spring load: marked with two lines
 |  |  | ||
| Light spring load | Standard spring load | Heavy spring load |
Notes
Special types on request.
Spring plungers are specially tested for spring range and forces.
Spring plungers are specially tested for spring range and forces.
References
Calculation of indexing resistance, please refer to appendix - Technical Data -
Version with higher spring forces see "EH 22080. Spring Plungers, smooth, long, with collar and ball".
Version with higher spring forces see "EH 22080. Spring Plungers, smooth, long, with collar and ball".
Further products
• Spring Plungers, with collar and ball, front slot
• Spring Plungers, smooth, long, with collar and ball
• Spring Plungers, smooth, with collar and ball, self-clamping
• Holders, for spring plungers
• Spring Plungers, smooth, long, with collar and ball
• Spring Plungers, smooth, with collar and ball, self-clamping
• Holders, for spring plungers
Drawing
picture 1 picture 2 
Order Information
| Dimensions | Stroke | Spring load1) | Operating temperature range | Location hole | Weight | Art. No. | ||||||
| d1 | d2 | d3 | l1 | l2 | s | F1 | F2 | min. | max. | H7 | ||
| +0.1 | ~ | ~ | ~ | |||||||||
| [mm] | [mm] | [N] | [°C] | [mm] | [g] | |||||||
| body and ball from stainless steel, light spring load – picture 1 | ||||||||||||
| 4 | 3.00 | 4.6 | 5.0 | 0.9 | 1.00 | 0.4 | 1.0 | – | 250 | 4 | 0.3 | 22080.1004 |
| 5 | 4.00 | 5.6 | 6.0 | 0.9 | 1.40 | 0.5 | 4.7 | – | 250 | 5 | 0.6 | 22080.1005 |
| 6 | 5.00 | 6.5 | 7.0 | 1.0 | 1.80 | 2.3 | 6.5 | – | 250 | 6 | 1.0 | 22080.1006 |
| 8 | 6.50 | 8.5 | 9.0 | 1.1 | 2.40 | 4.0 | 9.0 | – | 250 | 8 | 2.0 | 22080.1008 |
| 10 | 8.50 | 11.0 | 13.0 | 1.5 | 3.30 | 3.9 | 10.0 | – | 250 | 10 | 4.4 | 22080.1010 |
| 12 | 10.00 | 13.0 | 16.0 | 2.3 | 4.00 | 6.2 | 14.6 | – | 250 | 12 | 7.0 | 22080.1012 |
| body and ball from stainless steel, standard spring load – picture 1 | ||||||||||||
| 3 | 2.38 | 3.5 | 4.0 | 0.6 | 0.70 | 1.8 | 3.5 | – | 250 | 3 | 0.1 | 22080.0003 |
| 4 | 3.00 | 4.6 | 5.0 | 0.9 | 1.00 | 2.5 | 6.0 | – | 250 | 4 | 0.3 | 22080.0004 |
| 5 | 4.00 | 5.6 | 6.0 | 0.9 | 1.40 | 3.0 | 6.5 | – | 250 | 5 | 0.6 | 22080.0005 |
| 6 | 5.00 | 6.5 | 7.0 | 1.0 | 1.80 | 5.5 | 11.5 | – | 250 | 6 | 1.0 | 22080.0006 |
| 8 | 6.50 | 8.5 | 9.0 | 1.1 | 2.40 | 7.0 | 12.5 | – | 250 | 8 | 2.1 | 22080.0008 |
| 10 | 8.50 | 11.0 | 13.0 | 1.5 | 3.30 | 8.5 | 18.5 | – | 250 | 10 | 4.5 | 22080.0010 |
| 12 | 10.00 | 13.0 | 16.0 | 2.3 | 4.00 | 12.0 | 26.5 | – | 250 | 12 | 7.2 | 22080.0012 |
| body and ball from stainless steel, heavy spring load – picture 1 | ||||||||||||
| 4 | 3.00 | 4.6 | 5.0 | 0.9 | 1.00 | 5.0 | 10.4 | – | 250 | 4 | 0.3 | 22080.2004 |
| 5 | 4.00 | 5.6 | 6.0 | 0.9 | 1.40 | 6.0 | 12.0 | – | 250 | 5 | 0.6 | 22080.2005 |
| 6 | 5.00 | 6.5 | 7.0 | 1.0 | 1.80 | 7.3 | 19.0 | – | 250 | 6 | 1.0 | 22080.2006 |
| 8 | 6.50 | 8.5 | 9.0 | 1.1 | 2.40 | 11.0 | 25.0 | – | 250 | 8 | 2.2 | 22080.2008 |
| 10 | 8.50 | 11.0 | 13.0 | 1.5 | 3.30 | 17.0 | 37.0 | – | 250 | 10 | 4.6 | 22080.2010 |
| 12 | 10.00 | 13.0 | 16.0 | 2.3 | 4.00 | 28.0 | 57.0 | – | 250 | 12 | 7.4 | 22080.2012 |
| body from brass, ball from stainless steel, standard spring load – picture 2 | ||||||||||||
| 3 | 2.38 | 3.6 | 4.0 | 0.6 | 0.60 | 1.8 | 3.5 | – | 250 | 3 | 0.2 | 22080.0203 |
| 4 | 3.00 | 4.5 | 5.0 | 1.0 | 0.80 | 3.0 | 6.0 | – | 250 | 4 | 0.4 | 22080.0204 |
| 5 | 4.00 | 5.5 | 6.0 | 1.0 | 1.00 | 4.0 | 6.5 | – | 250 | 5 | 0.7 | 22080.0205 |
| 6 | 5.00 | 6.5 | 7.0 | 1.0 | 1.60 | 6.0 | 11.5 | – | 250 | 6 | 1.2 | 22080.0206 |
| 8 | 6.50 | 8.5 | 9.0 | 1.0 | 1.90 | 8.0 | 12.5 | – | 250 | 8 | 2.8 | 22080.0208 |
| body from thermoplastic, ball from stainless steel, standard spring load – picture 2 | ||||||||||||
| 3 | 2.00 | 3.6 | 4.0 | 0.6 | 0.55 | 1.7 | 3.5 | -30 | 50 | 3 | 0.1 | 22080.0403 |
| 4 | 3.00 | 4.6 | 5.0 | 1.0 | 0.80 | 3.0 | 6.5 | -30 | 50 | 4 | 0.2 | 22080.0404 |
| 5 | 4.00 | 5.6 | 6.0 | 1.0 | 1.00 | 6.0 | 9.4 | -30 | 50 | 5 | 0.4 | 22080.0405 |
| 6 | 5.00 | 6.5 | 7.0 | 1.0 | 1.60 | 6.2 | 12.6 | -30 | 50 | 6 | 0.7 | 22080.0406 |
| 8 | 6.50 | 8.5 | 9.0 | 1.0 | 1.90 | 10.0 | 20.4 | -30 | 50 | 8 | 1.5 | 22080.0408 |
| 10 | 8.00 | 11.0 | 13.5 | 1.5 | 2.40 | 11.9 | 22.3 | -30 | 50 | 10 | 3.1 | 22080.0410 |
| 12 | 10.00 | 13.0 | 16.0 | 1.5 | 3.30 | 14.0 | 25.0 | -30 | 50 | 12 | 5.7 | 22080.0412 |
| body and ball from thermoplastic, standard spring load – picture 2 | ||||||||||||
| 4 | 3.00 | 4.6 | 5.0 | 1.0 | 0.80 | 3.0 | 6.5 | -30 | 50 | 4 | 0.1 | 22080.0604 |
| 5 | 4.00 | 5.6 | 6.0 | 1.0 | 1.00 | 6.0 | 9.4 | -30 | 50 | 5 | 0.2 | 22080.0605 |
| 6 | 5.00 | 6.5 | 7.0 | 1.0 | 1.60 | 6.2 | 12.6 | -30 | 50 | 6 | 0.3 | 22080.0606 |
| 8 | 6.50 | 8.5 | 9.0 | 1.0 | 1.90 | 10.0 | 20.4 | -30 | 50 | 8 | 0.6 | 22080.0608 |
| 10 | 8.00 | 11.0 | 13.5 | 1.5 | 2.40 | 11.9 | 22.3 | -30 | 50 | 10 | 1.4 | 22080.0610 |
| 12 | 10.00 | 13.0 | 16.0 | 1.5 | 3.30 | 14.0 | 25.0 | -30 | 50 | 12 | 2.4 | 22080.0612 |
Application Example
Part number list
Number of items
| Part number |
|---|
Unit price (excluding VAT)(Unit price including VAT) | Standard shipping days |
|---|
0.90 € ( 1.07 € ) | Stock item: 1 working dayAvailable for same-day shipping |
0.86 € ( 1.02 € ) | Stock item: 1 working dayAvailable for same-day shipping |
0.86 € ( 1.02 € ) | Stock item: 1 working dayAvailable for same-day shipping |
0.91 € ( 1.08 € ) | Stock item: 1 working dayAvailable for same-day shipping |
1.12 € ( 1.33 € ) | Stock item: 1 working dayAvailable for same-day shipping |
1.55 € ( 1.84 € ) | Stock item: 1 working dayAvailable for same-day shipping |
1.86 € ( 2.21 € ) | Stock item: 1 working dayAvailable for same-day shipping |
2.74 € ( 3.26 € ) | Stock item: 1 working dayAvailable for same-day shipping |
1.54 € ( 1.83 € ) | Stock item: 1 working dayAvailable for same-day shipping |
1.59 € ( 1.89 € ) | 4 working days |
1.71 € ( 2.03 € ) | Stock item: 1 working dayAvailable for same-day shipping |
1.99 € ( 2.37 € ) | Stock item: 1 working dayAvailable for same-day shipping |
0.66 € ( 0.79 € ) | 2 working days |
0.62 € ( 0.74 € ) | 4 working days |
0.63 € ( 0.75 € ) | 4 working days |
0.65 € ( 0.77 € ) | 4 working days |
0.78 € ( 0.93 € ) | Stock item: 1 working dayAvailable for same-day shipping |
1.32 € ( 1.57 € ) | Stock item: 1 working dayAvailable for same-day shipping |
1.71 € ( 2.03 € ) | 4 working days |
0.76 € ( 0.90 € ) | Stock item: 1 working dayAvailable for same-day shipping |
0.77 € ( 0.92 € ) | Stock item: 1 working dayAvailable for same-day shipping |
0.79 € ( 0.94 € ) | 2 working days |
0.91 € ( 1.08 € ) | 4 working days |
1.54 € ( 1.83 € ) | Stock item: 1 working dayAvailable for same-day shipping |
2.08 € ( 2.48 € ) | 4 working days |
0.94 € ( 1.12 € ) | 4 working days |
1.00 € ( 1.19 € ) | 3 working days |
1.04 € ( 1.24 € ) | 4 working days |
1.07 € ( 1.27 € ) | 4 working days |
1.29 € ( 1.54 € ) | 4 working days |
1.71 € ( 2.03 € ) | 4 working days |
2.08 € ( 2.48 € ) | 4 working days |
1.00 € ( 1.19 € ) | 4 working days |
1.07 € ( 1.27 € ) | Stock item: 1 working dayAvailable for same-day shipping |
1.07 € ( 1.27 € ) | 4 working days |
1.12 € ( 1.33 € ) | 4 working days |
1.36 € ( 1.62 € ) | 4 working days |
1.76 € ( 2.09 € ) | 4 working days |
2.15 € ( 2.56 € ) | 4 working days |
More Information
Basic information
To be used for locating or for applying pressure, as a detent or for ejection.
Catalog
Loading...