T-angle linear actuator connectors, Stainless Steel
- Volume Discount
GN 191.1 Stainless Steel-T-angle linear actuator connectors are normally supplied mounted only in connection with a linear actuator and for function control.
By means of the clamping screw on the guide bore d1 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911.3 (article code see table of dimensions).
By means of the clamping screw on the guide bore d1 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911.3 (article code see table of dimensions).
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
191.1-G18-B18-2-NI
Basic information
| Bore d1 | G 18 | Bore d2 | B 18 | Identification No. | 2, with 2 Stainless Steel-clamping screws DIN 912 |
|---|---|---|---|---|---|
| Material | NI, Stainless Steel | Weight(kg) | 0.235 |
This page is T-angle linear actuator connectors, Stainless Steel, part number 191.1-G18-B18-2-NI.
You can find the detail information about specifications and dimensions on part number 191.1-G18-B18-2-NI.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.