Part number:
possible part numbers found.Part number |
---|
Order suspended |
Order suspended |
Order suspended |
Unit price (excluding VAT)(Unit price including VAT) | Standard shipping days |
---|
52.68 € ( 62.69 € ) | 7 working days |
54.56 € ( 64.93 € ) | 7 working days |
53.98 € ( 64.24 € ) | 7 working days |
93.56 € ( 111.34 € ) | 7 working days |
95.42 € ( 113.55 € ) | 7 working days |
60.76 € ( 72.30 € ) | 7 working days |
63.06 € ( 75.04 € ) | 7 working days |
62.06 € ( 73.85 € ) | 7 working days |
105.00 € ( 124.95 € ) | 7 working days |
107.30 € ( 127.69 € ) | 7 working days |
[Specifications]
・Type: CL. U-bar version. with two flanged washers and clamping screw GN 708.1, ULC. Clamping arm extended. with slotted hole. two flanged washers and clamping screw GN 708.1, AL. U-bar version. with two flanged washers, EL. Solid clamping bar with clasp for welding, UL. Clamping arm extended. with slotted hole and with two flanged washers
・Size: 130, 230
Toggle clamps GN 810.3 are latched in both end positions. In the clamped position, this prevents unintentional opening or opening caused by vibrations; and in the open position, it prevents self-closing of the toggle clamp, such as due to an extended clamping arm. The latching can be disabled with a single hand to allow for opening / closing. They work according to the toggle principle: lever and clamping bar move in the same direction. In the clamped position the operating lever is in its vertical position. Toggle clamps with forked clamping arm, with two flanged washers (type AL) can accommodate an application specific clamping screw. A clamping screw with neoprene rubber tip is also included for type CL. Type EL version can either be utilized by welding the clasp which can then accommodate an application specific hold-down fastener component, or by utilizing the bar in conjunction with the GN 809 holders for clamping screws to hold the work piece in place.