- | IP 67; (on the housing: IP 67; on the shaft: IP 67) | Aluminium | 100; ((24 V)) | - | - | - | - | 10-30 DC | - | -40-85 | - | Yes | DPV2 | - | - | - | - | 12000 | - | 98 | PROFIBUS DP | - | - | 8192 steps; 4096 revolutions; 25 bit | binary | - | - | - | - | Ø 58 / L = 94 | - | - | 6 | 1 pieces |
- | IP 67; (on the housing: IP 67; on the shaft: IP 67) | Aluminium | 100; ((24 V)) | - | - | - | - | 10-30 DC | - | -40-85 | - | Yes | DPV2 | - | - | - | - | 12000 | - | 98 | PROFIBUS DP | - | - | 8192 steps; 4096 revolutions; 25 bit | binary | - | - | - | - | Ø 58 / L = 110 | - | - | 10 | 1 pieces |
- | IP 65; (on the housing: IP 65; on the shaft: IP 64) | Aluminium | 230; ((10 V DC); 100 (24 V DC)) | - | - | - | - | 10-30 DC | - | -40-85 | - | Yes | - | 6steel (1.4104)
Max. shaft load axial (at the shaft end) [N]: 40
Max. shaft load radial (at the shaft end) [N]: 110
Fixing flange: synchro-flange | - | CANopen | - | 6000 | - | 98 | CAN | - | - | 8192 steps; 4096 revolutions; 25 bit | binary | - | - | - | - | Ø 58 / L = 94 | - | - | 6 | 1 pieces |
- | IP 65; (on the housing: IP 65; on the shaft: IP 64) | Aluminium | 230; ((10 V DC); 100 (24 V DC)) | - | - | - | - | 10-30 DC | - | -40-85 | - | Yes | - | 10steel (1.4104)
Max. shaft load axial (at the shaft end) [N]: 40
Max. shaft load radial (at the shaft end) [N]: 110
Fixing flange: clamping flange | - | CANopen | - | 6000 | - | 98 | CAN | - | - | 8192 steps; 4096 revolutions; 25 bit | binary | - | - | - | - | Ø 58 / L = 110 | - | - | 10 | 1 pieces |
- | IP 67 | Housing cap: aluminium; Housing: steel | 230; ((10 V DC); 100 (24 V DC)) | - | - | - | - | 10-30 DC | - | -40-85 | - | Yes | - | - | - | CIP (Common Industrial Protocol) | - | 12000 | Yes | 98 | DeviceNet | - | - | 8192 steps; 4096 revolutions; 25 bit | binary | - | - | - | - | Ø 58 / L = 110 | - | - | 10 | 1 pieces |
25 | IP 65 | flange: aluminium; housing: steel powder-coated | < 30 | - | - | - | - | 4.5-30 DC | - | -40-85 | Clock input; TTL-compatible signals; clock and clock (inv.) from drivers to RS 422; data output; synchronous serial; TTL-compatible signals, data, and data (inv.) | - | - | 6steel
Max. shaft load axial (at the shaft end) [N]: 40
Max. shaft load radial (at the shaft end) [N]: 110 | - | - | - | 12000 | - | 98 | SSI data interface | reversal of direction of rotation; reset to zero | 3 | 4096 resolution; 8192 revolutions; 25 bit | Gray code; (increasing code values when turned clockwise (seen on the shaft)) | - | - | - | - | Ø 36.5 / L = 69.5 | - | - | 6 | 1 pieces |
25 | IP 65 | flange: aluminium; housing: steel powder-coated | < 30 | - | - | - | - | 4.5-30 DC | - | -40-85 | Clock input; TTL-compatible signals; clock and clock (inv.) from drivers to RS 422; data output; synchronous serial; TTL-compatible signals, data, and data (inv.) | - | - | 10steel
Max. shaft load axial (at the shaft end) [N]: 40
Max. shaft load radial (at the shaft end) [N]: 110 | - | - | - | 12000 | - | 98 | SSI data interface | reversal of direction of rotation; reset to zero | 3 | 4096 resolution; 8192 revolutions; 25 bit | Gray code; (increasing code values when turned clockwise (seen on the shaft)) | - | - | - | - | Ø 36.5 / L = 79 | - | - | 10 | 1 pieces |
25 | IP 65 | flange: aluminium; housing: steel powder-coated | < 30 | - | - | - | - | 4.5-30 DC | Cable: 0.2 m, PUR; axial | -25-85 | Clock input; TTL-compatible signals; clock and clock (inv.) from drivers to RS 422; data output; synchronous serial; TTL-compatible signals, data, and data (inv.) | - | - | 10steel
Max. shaft load axial (at the shaft end) [N]: 40
Max. shaft load radial (at the shaft end) [N]: 110 | - | - | - | 12000 | - | 98 | SSI data interface | reversal of direction of rotation; reset to zero | 3 | 4096 resolution; 8192 revolutions; 25 bit | Gray code; (increasing code values when turned clockwise (seen on the shaft)) | - | - | - | - | Ø 36.5 / L = 69.5 | - | - | 10 | 1 pieces |
20 | IP 68; IP 69K | flange: aluminium; housing cap: steel scratch-resistant cathodic dip coating | < 100; ((10 V DC) ; ≤ 50 (24 V DC)) | III | - | 0.08 | - | 9-30 DC; ("supply class 2" to cULus) | Connector: 1 x M12, axial | -40-85 | - | Yes | - | 10steel (1.4104)
Max. shaft load axial (at the shaft end) [N]: 180
Max. shaft load radial (at the shaft end) [N]: 180
Fixing flange: synchro-flange | - | CANopen | - | 6000 | Yes | - | CAN | - | 5 | 4096 steps; 4096 revolutions; 24 bit | binary | - | - | - | - | Ø 36.5 / L = 100 | - | - | 10 | 1 pieces |
20 | IP 68; IP 69K | flange: aluminium; housing cap: steel scratch-resistant cathodic dip coating | < 100; ((10 V DC) ; ≤ 50 (24 V DC)) | III | - | 0.08 | - | 9-30 DC; ("supply class 2" to cULus) | Connector: 1 x M12, axial | -40-85 | - | Yes | - | 10steel (1.4104)
Max. shaft load axial (at the shaft end) [N]: 180
Max. shaft load radial (at the shaft end) [N]: 180
Fixing flange: synchro-flange | - | CANopen | - | 6000 | Yes | - | CAN | - | 5 | 4096 steps; 4096 revolutions; 24 bit | binary | - | - | - | - | Ø 36.5 / L = 100 | - | - | 10 | 1 pieces |
20 | IP 68; IP 69K | flange: aluminium; housing cap: steel scratch-resistant cathodic dip coating | < 100; ((10 V DC) ; ≤ 50 (24 V DC)) | III | - | 0.08 | - | 9-30 DC | Connector: 1 x M12, axial | -40-85 | - | Yes | - | - | CANopen interface | CANopen | - | 6000 | Yes | - | CAN | - | 5 | 4096 steps; 4096 revolutions; 24 bit | binary | - | - | - | - | Ø 36.5 / L = 100 | - | - | 10 | 1 pieces |
20 | IP 68; IP 69K | flange: aluminium; housing cap: steel scratch-resistant cathodic dip coating | < 100; ((10 V DC) ; ≤ 50 (24 V DC)) | III | - | 0.08 | - | 9-30 DC; ("supply class 2" to cULus) | Connector: 1 x M12, axial | -40-85 | - | Yes | - | 10steel (1.4104)
Max. shaft load axial (at the shaft end) [N]: 180
Max. shaft load radial (at the shaft end) [N]: 180
Fixing flange: synchro-flange | - | CANopen | - | 6000 | Yes | - | CAN | - | 5 | 4096 steps; 4096 revolutions; 24 bit | binary | - | - | - | - | Ø 36.5 / L = 100 | - | - | 10 | 1 pieces |
20 | IP 68; IP 69K | flange: aluminium; housing cap: steel scratch-resistant cathodic dip coating | < 100; ((10 V DC) ; ≤ 50 (24 V DC)) | III | - | 0.08 | - | 9-30 DC | Connector: 1 x M12, radial | -40-85 | - | Yes | - | - | CANopen interface | CANopen | - | 6000 | Yes | - | CAN | - | 5 | 4096 steps; 4096 revolutions; 24 bit | binary | - | - | - | - | Ø 36.8 / L = 76 | - | - | 10 | 1 pieces |
20 | IP 68; IP 69K | flange: stainless steel (1.4404 / 316L); housing: stainless steel (1.4404 / 316L) | < 100; ((10 V DC) ; ≤ 50 (24 V DC)) | III | - | 0.08 | - | 9-30 DC | Connector: 1 x M12, axial; Moulded body: stainless steel (1.4401 / 316) | -40-85 | - | Yes | - | 10stainless steel
Max. shaft load axial (at the shaft end) [N]: 180
Max. shaft load radial (at the shaft end) [N]: 180
Fixing flange: synchro-flange | - | CANopen | - | 6000 | Yes | - | CAN | - | 5 | 4096 steps; 4096 revolutions; 24 bit | binary | - | - | - | - | Ø 42 / L = 107.9 | - | - | 10 | 1 pieces |
20 | IP 65; (on the housing: IP 67; on the shaft: IP 64) | flange: aluminium; housing: stainless steel (1.4521 / 444) | < 75 | III | Connector: 1 x M12; Moulded body: stainless steel (1.4401 / 316) | 0.1 | -40-85 | 18-30 DC; (to PELV) | - | -40-85 | - | Yes | - | - | - | - | - | - | Yes | 98; (condensation not permissible) | IO-Link | - | 1 | 65536 steps; 32768 revolutions; 31 bit | - | 12000 | 1000 | 30 | 1.1 | Ø 36 / L = 65 | A | COM3 (230.4 kBaud) | 6 | 1 pieces |
20 | IP 68; IP 69K | flange: stainless steel (1.4404 / 316L); housing: stainless steel (1.4404 / 316L) | < 75 | III | Connector: 1 x M12; Moulded body: stainless steel (1.4401 / 316) | 0.1 | -40-85 | 18-30 DC; (to PELV) | - | -40-85 | - | Yes | - | - | - | - | magnetic | - | Yes | 98; (condensation not permissible) | IO-Link | - | 5 | 65536 steps; 32768 revolutions; 31 bit | - | 6000 | 1000 | 30 | 1.1 | Ø 42 / L = 107.9 | A | COM3 (230.4 kBaud) | 10 | 1 pieces |
20 | IP 65; (on the housing: IP 67; on the shaft: IP 65) | flange: aluminium; housing: stainless steel (1.4521 / 444) | < 75 | III | Connector: 1 x M12; Moulded body: stainless steel (1.4401 / 316) | 0.1 | -40-85 | 18-30 DC; (to PELV) | - | -40-85 | - | Yes | - | - | - | - | - | - | Yes | 98; (condensation not permissible) | IO-Link | - | 1 | 65536 steps; 32768 revolutions; 31 bit | - | 12000 | 1000 | 30 | 1.1 | Ø 58 / L = 79 | A | COM3 (230.4 kBaud) | 6 | 1 pieces |
20 | IP 65; (on the housing: IP 67; on the shaft: IP 65) | flange: aluminium; housing: stainless steel (1.4521 / 444) | < 75 | III | Connector: 1 x M12; Moulded body: stainless steel (1.4401 / 316) | 0.1 | -40-85 | 18-30 DC; (to PELV) | - | -40-85 | - | Yes | - | - | - | - | - | - | Yes | 98; (condensation not permissible) | IO-Link | - | 1 | 65536 steps; 32768 revolutions; 31 bit | - | 12000 | 1000 | 30 | 1.1 | Ø 58 / L = 79 | A | COM3 (230.4 kBaud) | 10 | 1 pieces |
