Configure
- d2(mm)
- 28
- 30
- 33
- 37
- 40
- 44
- 49
- 54
- 65
- 70
- 75
- 85
- 90
- 95
- 100
- 105
- 110
- 120
- 125
- 130
- 135
- d3(mm)
- 23
- 25
- 28
- 33
- 35
- 39
- 44
- 49
- 59
- 64
- 68
- 78
- 82
- 87
- 92
- 97
- 100
- 110
- 115
- 120
- 125
- d4(mm)
- 11
- 13
- 16
- 18
- 21
- 26
- 32
- 38
- 42
- 48
- 52
- 58
- 62
- 68
- 72
- 77
- 83
- 88
- 93
- 98
- 103
- B(mm)
- 14
- 16
- 18
- 20
- 22
- 25
- 26
- 28
- 32
- b(mm)
- 4
- 5
- 6
- 7
- 8
- 10
- t(mm)
- 2
- 2.5
- 3
- 3.5
- 4
- Tightening torque TAS1)(Nm)
- 4.5
- 8
- 18
- 35
- Permissible axial load(kN)
- 35
- 40
- 60
- 80
- 90
- 130
- 160
- 190
- 210
- 240
- 300
- 340
- 380
- 490
- 520
- 620
- 650
- 680
- 710
- 740
- d5(mm)
- 21
- 23
- 26
- 29
- 32
- 36
- 41
- 46
- 54
- 60
- 64
- 74
- 78
- 83
- 88
- 93
- 98
- 107
- 112
- 117
- 122
- Wrench size sw(mm)
- 6
- 24
- 27
- 30
- 34
- 36
- 41
- 46
- 50
- 65
- 70
- 80
- 85
- 90
- 95
- 100
- Est. shipping days
- All
- Within 4 working days
Locknuts KMT with Locking Pins
Part number:
possible part numbers found.Part number list
Number of items
| Part number |
|---|
Unit price (excluding VAT)(Unit price including VAT) | Standard shipping days |
|---|
21.47 € ( 25.55 € ) | 4 working days |
21.75 € ( 25.88 € ) | 4 working days |
23.71 € ( 28.21 € ) | 4 working days |
25.54 € ( 30.39 € ) | 4 working days |
25.54 € ( 30.39 € ) | 4 working days |
28.51 € ( 33.93 € ) | 4 working days |
30.29 € ( 36.05 € ) | 4 working days |
32.79 € ( 39.02 € ) | 4 working days |
40.66 € ( 48.39 € ) | 4 working days |
44.01 € ( 52.37 € ) | 4 working days |
49.45 € ( 58.85 € ) | 4 working days |
56.25 € ( 66.94 € ) | 4 working days |
60.16 € ( 71.59 € ) | 4 working days |
65.34 € ( 77.75 € ) | 4 working days |
73.89 € ( 87.93 € ) | 4 working days |
77.90 € ( 92.70 € ) | 4 working days |
85.52 € ( 101.77 € ) | 4 working days |
97.52 € ( 116.05 € ) | 4 working days |
111.79 € ( 133.03 € ) | 4 working days |
117.71 € ( 140.07 € ) | 4 working days |
123.98 € ( 147.54 € ) | 4 working days |
More Information
Basic information
Material: KMT: Steel.
Strength min. 350 N/mm2.
Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up to 0.005 mm. Slotnut-design. Up to size 15 with two additional wrench flats.
