Magnet Bis Catch
- Volume Discount
[Features]
The screw will always be fastened definitively against the surface.
Because the screw catch is completely locked to the bit by way of an automatic locking function, the projected dimensions of the bit cannot be changed when the impact screwdriver is used.
Screwing can be done with a long screw-driver, even when firmly grasped by a heavy-duty magnet.
[Uses]
For work done involving specific screwing on a flat surface as attached to a rechargeable, electric screwdriver.
The screw will always be fastened definitively against the surface.
Because the screw catch is completely locked to the bit by way of an automatic locking function, the projected dimensions of the bit cannot be changed when the impact screwdriver is used.
Screwing can be done with a long screw-driver, even when firmly grasped by a heavy-duty magnet.
[Uses]
For work done involving specific screwing on a flat surface as attached to a rechargeable, electric screwdriver.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
TMB-2065
Basic information
| Tip Type | Screw Catch | shank diameter(mm) | 6.35 | Overall Length(mm) | 65 |
|---|---|---|---|---|---|
| Single Product Set Product | Set Product | Tip size / Phillips (+) | No. 2 | Presence of magnet at the blade tip | N/A |
| Whether there is a double-end function | Available | Trusco Code | 270-9511 | Set Content | Double-end bit + No.2×65 bit 1 piece |
| Mass | 38 (g/set) |
This page is Magnet Bis Catch, part number TMB-2065.
You can find the detail information about specifications and dimensions on part number TMB-2065.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.