Short Stem Extra Long Ball-Point Hex Wrench Set (Part Numbers)
- Volume Discount
[Features]
· The ball point can be tilted up to a maximum of approximately 25°.
· For the short underneck, the short length (L2) is set to less than half the standard length.
· Optimal for work in narrow spaces.
· In order to prevent fingertips from touching the work surface, the bend angle has been set to 95°, a slightly wider angle than the standard.
· The ball point can be tilted up to a maximum of approximately 25°.
· For the short underneck, the short length (L2) is set to less than half the standard length.
· Optimal for work in narrow spaces.
· In order to prevent fingertips from touching the work surface, the bend angle has been set to 95°, a slightly wider angle than the standard.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
SHKXB9S
Basic information
| Type | Hex L-shape wrench | Tip Type | Ballpoint | Width across flat dimension(mm) | 10 / 2 / 3 / 4 / 5 / 6 / 8 / 1.5 / 2.5 |
|---|---|---|---|---|---|
| Single Product/Set Classification | Set Product | Overall length (L dimension)(mm) | 100 / 112 / 160 / 180 / 200 / 140 / 90 / 126 / 224 | Hex bar wrench underneck length (H dimension) L-shape only(mm) | 12 / 14 / 16 / 19 / 6 / 7 / 8 / 9 / 11 |
| Material | SNCM · V | Finishing | Mat Chrome Processing | Hardness(HRC) | 55-60 |
| Set Content | 1.5、2、2.5、3、4、5、6、8、10 | Number Contained In A Packet | 9 | Features | 1.5 and 2 are standard hexagon type. |
| Supplement 1 | For the short underneck, the length (L2) is set to below 1/2 of the standard length. Ideal for working in small spaces. |
This page is Short Stem Extra Long Ball-Point Hex Wrench Set, part number SHKXB9S.
You can find the detail information about specifications and dimensions on part number SHKXB9S.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.