"Super Ball Wrench Set" (with Reinforced Handle)
[Features]
· Final tightening is also possible with the ballpoint shape, a hard to break, conveniently reinforced handle made by a stress distribution patented manufacturing method.
· As well as an insertion hole, it is possible to always turn the handle in the easy-to-rotate direction (5 directions), which enables comfortable final tightening.
· Hardness is HRC 60±1.
· Enables tightening of up to 4 times the normal force.
· Final tightening is also possible with the ballpoint shape, a hard to break, conveniently reinforced handle made by a stress distribution patented manufacturing method.
· As well as an insertion hole, it is possible to always turn the handle in the easy-to-rotate direction (5 directions), which enables comfortable final tightening.
· Hardness is HRC 60±1.
· Enables tightening of up to 4 times the normal force.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
SBL-1000
Basic information
| Type | Hex L-shape wrench | Tip Type | Ballpoint | Width across flat dimension(mm) | 10 / 2 / 3 / 4 / 5 / 6 / 8 / 1.5 / 2.5 |
|---|---|---|---|---|---|
| Single Product/Set Classification | Set Product | Set Content(mm) | 1.5、2、2.5、3、4、5、6、8、10 | Set Content(piece) | 9 |
| Trusco Code | 219-7952 | Mass(g) | 630/set | Features | The ball point shape allows final tightening by using hard to break, convenient reinforced handle, that is made by stress distribution patented manufacturing method. Due to an insertion hole it is possible to always turn the handle in the easy direction (5 directions), which enables comfortable final tightening. |
| Accessory | Holder auxiliary handle | Hardness | HRC60±1 |
This page is "Super Ball Wrench Set" (with Reinforced Handle), part number SBL-1000.
You can find the detail information about specifications and dimensions on part number SBL-1000.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.