End-Cutting Nippers 6901-130
[Features]
· Enables cutting of soft and hard wire and also thin piano wire.
· Joint section is made from two separate pieces for smooth movement.
· Hardness of the blades which have been carefully quenched is approximately HRC 64.
· Oil tempered and quenched chrome vanadium electrical steel is used for the material.
· Head finish: Polished.
· Handle Specification: Plastic Coating
· Enables cutting of soft and hard wire and also thin piano wire.
· Joint section is made from two separate pieces for smooth movement.
· Hardness of the blades which have been carefully quenched is approximately HRC 64.
· Oil tempered and quenched chrome vanadium electrical steel is used for the material.
· Head finish: Polished.
· Handle Specification: Plastic Coating
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
6901-130
Basic information
| Product Category | Nippers | Nipper Type | Nippers | Overall Length(mm) | 130 |
|---|---|---|---|---|---|
| With or without Spring | N/A | Piano Wire Cutting Performance(φ/mm) | 0.75 | Single Product/Set Classification | Single Item |
| Mass(g) | 111 | Soft Wire Cutting Performance(φ/mm) | 0.4-2 | Medium-hard Wire Cutting Capability(φ/mm) | 1.3 |
| Hard Wire Cutting Performance(φ/mm) | 1 | Main body: option | Main Body | JAN Code | 4003773017974 |
| Specifications | Head Finish: Polished / Handle Specification: Plastic Coating | Features | Hardness of the blades which have been carefully quench processed is approximately HRC64. Made from oil-quenched hardened chrome vanadium electrical steel. |
This page is End-Cutting Nippers 6901-130, part number 6901-130.
You can find the detail information about specifications and dimensions on part number 6901-130.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.