- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 21/4/2024 to 0:00 (CET) 22/4/2024. We apologize for the inconvenience.
T-Max Q-Cut Coromant Capto Cutting Unit C-R / LF151.23
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Groove Width (mm) | Maximum Groove Depth (mm) | Cutting Direction | Sheet size | Dimension L1 (mm) | Dimensions D 5m | Gauge Chip | Tip tightening torque (Nm) | Dimensions/f1 (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
352.44 € | 1 | 6 Days | 2 | 15 | Right-hand | 20 | 50 | 32 | N151.2-200- 5E | 2.5 | 22 | ||
352.44 € | 1 | 6 Days | 2 | 20 | Right-hand | 30 | 55 | 32 | N151.2-200- 5E | 2.5 | 22 | ||
303.65 € | 1 | 6 Days | 2 | 20 | Left-hand | 20 | 55 | 40 | N151.2-200- 5E | 2.5 | 27 | ||
352.44 € | 1 | 6 Days | 2.5 | 25 | Left-hand | 25 | 60 | 40 | N151.2-250- 5E | 3 | 27 | ||
352.44 € | 1 | 6 Days | 3 | 30 | Left-hand | 30 | 60 | 40 | N151.2-300- 5E | 3.5 | 27 | ||
352.44 € | 1 | 6 Days | 4 | 40 | Left-hand | 40 | 67 | 40 | N151.2-400- 5E | 5 | 27 | ||
303.65 € | 1 | 6 Days | 2 | 20 | Right-hand | 20 | 55 | 40 | N151.2-200- 5E | 2.5 | 27 | ||
303.65 € | 1 | 6 Days | 2.5 | 25 | Right-hand | 25 | 60 | 40 | N151.2-250- 5E | 3 | 27 | ||
303.65 € | 1 | 6 Days | 3 | 30 | Right-hand | 30 | 60 | 40 | N151.2-300- 5E | 3.5 | 27 | ||
303.65 € | 1 | 6 Days | 4 | 40 | Right-hand | 40 | 67 | 40 | N151.2-400- 5E | 5 | 27 | ||
393.26 € | 1 | 6 Days | 3 | 30 | Left-hand | 30 | 60 | 50 | N151.2-300-5E | 3.5 | 35 | ||
339.08 € | 1 | 6 Days | 4 | 40 | Left-hand | 40 | 67 | 50 | N151.2-400-5E | 5 | 35 | ||
339.08 € | 1 | 6 Days | 5 | 50 | Left-hand | 50 | 75 | 50 | N151.2-500-5E | 5 | 35 | ||
393.26 € | 1 | 6 Days | 6 | 60 | Left-hand | 60 | 76 | 50 | N151.2-600-5E | 5 | 35 | ||
339.08 € | 1 | 6 Days | 3 | 30 | Right-hand | 30 | 60 | 50 | N151.2-300-5E | 3.5 | 35 | ||
339.08 € | 1 | 6 Days | 4 | 40 | Right-hand | 40 | 67 | 50 | N151.2-400-5E | 5 | 35 | ||
393.26 € | 1 | 6 Days | 5 | 50 | Right-hand | 50 | 75 | 50 | N151.2-500-5E | 5 | 35 | ||
393.26 € | 1 | 6 Days | 6 | 60 | Right-hand | 60 | 76 | 50 | N151.2-600-5E | 5 | 35 | ||
455.48 € | 1 | 6 Days | 3 | 30 | Right-hand | 30 | 65 | 63 | N151.2-300-5E | 3.5 | 45 | ||
455.48 € | 1 | 6 Days | 4 | 40 | Right-hand | 40 | 67 | 63 | N151.2-400-5E | 5 | 45 | ||
455.48 € | 1 | 6 Days | 5 | 50 | Right-hand | 50 | 75 | 63 | N151.2-500-5E | 5 | 45 |
Loading...
Basic information
| Application | Outer Diameter Grooving / Cutting off / Profiling | Number of corners for tip use | 1 Corner | Specifications | Coolant Inlet: Radially from the Taper |
|---|
Configure
Basic Attributes
-
Groove Width(mm)
-
Maximum Groove Depth(mm)
-
Cutting Direction
- Right-hand
- Left-hand
-
Sheet size
-
Dimension L1(mm)
-
Dimensions D 5m
- 32
- 40
- 50
- 63
-
Gauge Chip
-
Tip tightening torque(Nm)
-
Type
- C3-RF151.23
- C4-LF151.23
- C4-RF151.23
- C5-LF151.23
- C5-RF151.23
- C6-RF151.23
Filter by standard shipping days
-
- All
- 6 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.