Square HSS End Mills
Search by sub-category
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
3S End Mill, 4-Flute Extra Long Blade
FUKUDA
Long blade for cutting such as deep grooving and wide widths Repolishing is easy- Volume Discount
Configure nowStarting from∗ ： 42.19 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
End Mill (Multi-Flute Center-Cutting Long Type), CC-EML
OSG
4-cutter end mill with centre cut in long design using cobalt high-speed steel as base material. Suitable for deep cuts.- Volume Discount
Configure nowStarting from∗ ： 19.92 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
End Mill (Multi-Flute Long-Shank Long Type), LS-EML
OSG
General purpose 4 flute cutter with long shank made of cobalt high speed steel as base material. Suitable for deep cuts.- Volume Discount
Configure nowStarting from∗ ： 32.54 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3S End Mill, 2-Flute (Standard Blade)
FUKUDA
Wide range of blade lengths and an abundance of sizes- Volume Discount
Configure nowStarting from∗ ： 24.88 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
G Standard End Mill, 2-Flute 2GE
NACHI(FUJIKOSHI)
General-purpose coated end-mill that performs machining of workpiece materials from carbon steel and stainless steel to aluminum.- Volume Discount
Configure nowStarting from∗ ： 34.77 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Multi-Flute Extra Long EXML
OSG
30°- 45° helix angle, cobalt high-speed steel, extra long type end mill.- Volume Discount
Configure nowStarting from∗ ： 28.84 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
LVS4T 4-Flute Blade Long Blade
SANKO MFG
A 4-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.- Volume Discount
Configure nowStarting from∗ ： 36.24 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Configure now
Starting from∗ ： 188.81 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 21.10 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Short
MISUMI
[Features]
-High-speed steel square cutter with 2 cutting edges and short cutting edge length, where the cutting edge diameter can be specified in 0.01 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Non-Coated
- 2 Flutes
- S (Short)
Configure nowMin. Shipping Days ： 7 Days -
SG-FAX End Mill, Long, 2-Flute SL2SGE
NACHI(FUJIKOSHI)
General-purpose coating end-mill. Suitable for deep grooving and grooving at depth.Configure nowStarting from∗ ： 72.81 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 43.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 69.28 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Multi-Flute Center Cut Short CC-EMS
OSG
Cobalt high speed steel centre cut.
Tool material: Cobalt high speed steel, Working material: General steel/stainless steel/cast iron/aluminium/copper
Coating: Uncoated, Standard/ageing category: Manufacturer's standard product, Number of flutes (pcs.): 4
Skew angle: standard spiral (30 to 44°).- Volume Discount
Configure nowStarting from∗ ： 16.82 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
XPM End Mill (2-Flute Deep-Carving Medium Type), DE-XPM-EDN
OSG
Long shank form end mill with 2 blades for deep engraving. Set with a shank radius thinner than the blade bore.- Volume Discount
Configure nowStarting from∗ ： 31.88 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
XPM, Slim-Shank Fine-Pitch Type, VSS-XPM-RESF
OSG
Slim shank roughing end mills; shank diameter is 1 mm smaller than blade diameter. Can freely adjust the extension and length.- Volume Discount
Configure nowStarting from∗ ： 82.91 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
End Mill (Roughing Medium Type), EX-REEN
OSG
Centre cutting series of heavy duty roughing cutters
Tool material: Cobalt high speed steel, Work material: General steel/stainless steel/cast iron/aluminium/copper
Coating: Uncoated, Standard/ageing category: Manufacturer's standard product, Helix angle: Standard helix (30 to 44°).- Volume Discount
Configure nowStarting from∗ ： 36.19 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3S End Mill, 2-Flute Long Blade
FUKUDA
Long blade for deep grooving such as die engraving and wide carving Abundant variety of sizes- Volume Discount
Configure nowStarting from∗ ： 30.66 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
End Mill for Keyway (Positive Tolerance)
FUKUDA
Endmill dedicated for key groove machining. Positive blade diameter tolerance. A straight shank.Configure nowStarting from∗ ： 44.96 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
VSM4T 4-Flute Regular
SANKO MFG
A 4-flute end mill for finish machining. The outer diameter tolerance is positive.Configure nowStarting from∗ ： 30.63 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
AL1T for 1-Flute Aluminum Sash
SANKO MFG
An end mill for machining aluminium wings.
Tool material: Cobalt high-speed steel, Working material: Aluminium
Coating: Uncoated, Standard/ageing category: Manufacturer's standard product, Number of cutting edges (pcs.): 1
Rotation angle: Standard helix (30 to 44°).Configure nowStarting from∗ ： 46.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SL Regular Slotting Blade
SANKO MFG
An end mill with a straight blade and 2 cutting edges.
Materials: HS-Co (cobalt high-speed steel)
Outer diameter tolerance: -0.03 to 0
Straight blade.Configure nowStarting from∗ ： 24.35 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 37.44 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MT Pattern Long End Mill with 2 Flutes LSLE-MT (SKH51)
TAIYO-TOOL
[Cutting Edge Shape Type]
· Square
[Tool Grade]
· High-speed steel
[Coating]
· Non-Coated
[Flute No.] 2-FluteConfigure nowStarting from∗ ： 91.46 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
![[AlCr-based coat] Carbide 4-blade End Mill EA824RD-3.0](//uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007523228_002.jpg?$product_view_b$)
[AlCr-based coat] Carbide 4-blade End Mill EA824RD-3.0
ESCO
【Product Specifications】
・Carbide alloy
・GSX coating
・This product supports applications from wet cutting of raw materials to a wide range of dry cutting.
・Tip dia.…3.0
・Length…45
・Blade L…7.5
・Shank dia.…6Configure nowStarting from∗ ： 45.52 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Short, Center Cut
MISUMI
The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!- Volume Discount
- AS
- 4 Flutes
- S (Short)
Configure nowStarting from∗ ： 48.41 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Regular, Center Cut
MISUMI
The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!- Volume Discount
- AS
- 4 Flutes
- R (Regular)
Configure nowStarting from∗ ： 54.30 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Long, Center Cut
MISUMI
The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!- Volume Discount
- AS
- 4 Flutes
- L (Long)
Configure nowStarting from∗ ： 72.57 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Short, Long Shank, Center Cut
MISUMI
The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!- Volume Discount
- AS
- 3 Flutes
- S (Short)
Configure nowStarting from∗ ： 59.65 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut
MISUMI
[Features]
-The coating exhibits excellent durability, even in high-speed machining where the tool is heavily loaded
-The coating exhibits high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- S (Short)
Configure nowStarting from∗ ： 45.93 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut
MISUMI
[Features]
-The coating exhibits excellent durability, even in high-speed machining where the tool is heavily loaded
-The coating exhibits high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- R (Regular)
Configure nowStarting from∗ ： 54.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut
MISUMI
[Features]
-The coating exhibits excellent durability, even in high-speed machining where the tool is heavily loaded
-The coating exhibits high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- L (Long)
Configure nowStarting from∗ ： 71.66 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut
MISUMI
[Features]
-The coating exhibits excellent durability, even in high-speed machining where the tool is heavily loaded
-The coating exhibits high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- AS
- 3 Flutes
- S (Short)
Configure nowStarting from∗ ： 56.26 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut
MISUMI
Powdered HSS with high durability is available more cheaply than the cobalt HSS market price- Volume Discount
- TiCN
- 4 Flutes
- S (Short)
Configure nowStarting from∗ ： 31.02 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiCN Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut
MISUMI
Powdered HSS with high durability is available more cheaply than the cobalt HSS market price- Volume Discount
- TiCN
- 4 Flutes
- R (Regular)
Configure nowStarting from∗ ： 41.08 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut
MISUMI
[Features]
-High-speed steel powder roughing type with long flute length expected to last long
-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TiCN
- 4 Flutes
- L (Long)
Configure nowStarting from∗ ： 57.44 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut
MISUMI
[Features]
-Long shank of high-speed steel powder expected to last a long time
-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TiCN
- 3 Flutes
- S (Short)
Configure nowStarting from∗ ： 54.64 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated High-Speed Steel Roughing End Mill, Short, Center Cut
MISUMI
[Features]
-High-speed roughing cutter made of steel, which offers both good machining performance and good price
-The coating has high oxidation resistance and high hardness, and has a long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- S (Short)
Configure nowStarting from∗ ： 30.95 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated High-Speed Steel Roughing End Mill, Regular, Center Cut
MISUMI
[Features]
-High-speed roughing cutter made of steel, which offers both good machining performance and good price
-The coating has high oxidation resistance and high hardness, and has a long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- R (Regular)
Configure nowStarting from∗ ： 39.21 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated High-Speed Steel Roughing End Mill, Long, Center Cut
MISUMI
[Features]
-High-speed steel roughing cutter that offers both good machining performance and reasonable price
-The coating has high oxidation resistance and high hardness, and has a long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- L (Long)
Configure nowStarting from∗ ： 47.64 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut
MISUMI
[Features]
-High-speed roughing cutter made of steel, which offers both good machining performance and good price
-The coating has high oxidation resistance and high hardness, and has a long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- AS
- 3 Flutes
- S (Short)
Configure nowStarting from∗ ： 43.81 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Powdered High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model
MISUMI
[Features]
-Uncoated short flutes of high-speed steel powder expected to last a long time
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 4 Flutes
- S (Short)
Configure nowStarting from∗ ： 39.37 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model
MISUMI
[Features]
-High speed steel powder roughers uncoated with normal flute length, expecting long life
-Can be reground. Please refer to the "Regrinding Service" page for details on how to proceed, what services you can avail, prices, etc.- Volume Discount
- Non-Coated
- 4 Flutes
- R (Regular)
Configure nowStarting from∗ ： 50.19 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Powdered High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model
MISUMI
[Features]
-High speed steel powder roughing, uncoated, with long flute length expected to last a long time
-Suitable for deep cavity milling
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 4 Flutes
- L (Long)
Configure nowStarting from∗ ： 71.06 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model
MISUMI
[Features]
-Uncoated long shank blade made of high-speed steel powder for roughing, which can be expected to have a long service life
-Suitable for milling deep cavities
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 3 Flutes
- S (Short)
Configure nowStarting from∗ ： 51.11 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
![[AlCr-based coat] Carbide 4-blade End Mill EA824RD-3.0](http://uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007523228_002.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| work material |
| Blade shape type |
| Number of flutes(sheet) |
| Tool Material Type |
| Machining Application |
| Shank diameter (d)(mm) |
| Coating |
| Overall Length (L)(mm) |
| Torsion Angle (θ) |
| Base Blade Y/N |
| Underneck length (ℓ1)(mm) |
| shank |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | FUKUDA | OSG | OSG | FUKUDA | NACHI(FUJIKOSHI) | OSG | SANKO MFG | EIKOSHA | OSG | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | FUKUDA | FUKUDA | SANKO MFG | SANKO MFG | SANKO MFG | EIKOSHA | TAIYO-TOOL | ESCO | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Short | AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Short, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Regular, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Long, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Short, Long Shank, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut | TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut | TiCN Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut | TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut | TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut | AS Coated High-Speed Steel Roughing End Mill, Short, Center Cut | AS Coated High-Speed Steel Roughing End Mill, Regular, Center Cut | AS Coated High-Speed Steel Roughing End Mill, Long, Center Cut | AS Coated High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut | Powdered High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model | Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model | Powdered High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model | Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model | ||||||||||||||||||||||||
| Starting from∗ | 42.19 € *Unit price with basic configuration Volume Discount | 19.92 € *Unit price with basic configuration Volume Discount | 32.54 € *Unit price with basic configuration Volume Discount | 24.88 € *Unit price with basic configuration Volume Discount | 34.77 € *Unit price with basic configuration Volume Discount | 28.84 € *Unit price with basic configuration Volume Discount | 36.24 € *Unit price with basic configuration | 188.81 € *Unit price with basic configuration | 21.10 € *Unit price with basic configuration | - | 72.81 € *Unit price with basic configuration | 43.90 € *Unit price with basic configuration | 69.28 € *Unit price with basic configuration | 16.82 € *Unit price with basic configuration Volume Discount | 31.88 € *Unit price with basic configuration Volume Discount | 82.91 € *Unit price with basic configuration Volume Discount | 36.19 € *Unit price with basic configuration Volume Discount | 30.66 € *Unit price with basic configuration Volume Discount | 44.96 € *Unit price with basic configuration | 30.63 € *Unit price with basic configuration | 46.41 € *Unit price with basic configuration | 24.35 € *Unit price with basic configuration | 37.44 € *Unit price with basic configuration Volume Discount | 91.46 € *Unit price with basic configuration | 45.52 € *Unit price with basic configuration | 48.41 € *Unit price with basic configuration Volume Discount | 54.30 € *Unit price with basic configuration Volume Discount | 72.57 € *Unit price with basic configuration Volume Discount | 59.65 € *Unit price with basic configuration Volume Discount | 45.93 € *Unit price with basic configuration Volume Discount | 54.00 € *Unit price with basic configuration Volume Discount | 71.66 € *Unit price with basic configuration Volume Discount | 56.26 € *Unit price with basic configuration Volume Discount | 31.02 € *Unit price with basic configuration Volume Discount | 41.08 € *Unit price with basic configuration Volume Discount | 57.44 € *Unit price with basic configuration Volume Discount | 54.64 € *Unit price with basic configuration Volume Discount | 30.95 € *Unit price with basic configuration Volume Discount | 39.21 € *Unit price with basic configuration Volume Discount | 47.64 € *Unit price with basic configuration Volume Discount | 43.81 € *Unit price with basic configuration Volume Discount | 39.37 € *Unit price with basic configuration Volume Discount | 50.19 € *Unit price with basic configuration Volume Discount | 71.06 € *Unit price with basic configuration Volume Discount | 51.11 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | Same day | 6 Days | 6 Days | Same day | 6 Days | 6 Days | Same day | 6 Days | 2 Days | 7 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||
| Blade diameter (D)(φ) | 3 ～ 60 | 3 ～ 40 | 10 ～ 40 | 0.8 ～ 100 | 1 ～ 50 | 3 ～ 40 | 3 ～ 60 | 20 ～ 50 | - | 2.7 ～ 25 | 3 ～ 30 | 3 ～ 40 | 6 ～ 50 | 2.5 ～ 40 | 8 ～ 50 | 10 ～ 25 | 6 ～ 50 | 3 ～ 50 | 3 ～ 30 | 3 ～ 40 | 6 ～ 12 | 2 ～ 49 | 1 ～ 60 | 5 ～ 50 | - | 6 ～ 30 | 6 ～ 30 | 10 ～ 30 | 6 ～ 30 | 5 ～ 32 | 6 ～ 30 | 10 ～ 30 | 6 ～ 30 | 6 ～ 32 | 6 ～ 30 | 10 ～ 30 | 6 ～ 30 | 5 ～ 50 | 6 ～ 50 | 10 ～ 50 | 6 ～ 30 | 5 ～ 30 | 6 ～ 30 | 10 ～ 25 | 6 ～ 30 |
| Blade length (ℓ)(mm) | 30 ～ 300 | 15 ～ 110 | 45 ～ 110 | 2 ～ 80 | 2 ～ 70 | 30 ～ 150 | 20 ～ 300 | 30 ～ 100 | - | 8 ～ 50 | 15 ～ 90 | 15 ～ 125 | 15 ～ 70 | 10 ～ 65 | 20 ～ 75 | 22 ～ 45 | 16 ～ 112 | 15 ～ 120 | 5 ～ 30 | 10 ～ 65 | 18 ～ 45 | 10 ～ 60 | 4 ～ 75 | 40 ～ 150 | - | 13 ～ 45 | 19 ～ 68 | 45 ～ 90 | 11 ～ 45 | 13 ～ 53 | 19 ～ 68 | 45 ～ 90 | 11 ～ 45 | 13 ～ 53 | 19 ～ 68 | 45 ～ 90 | 11 ～ 45 | 13 ～ 75 | 19 ～ 112 | 45 ～ 150 | 11 ～ 45 | 13 ～ 45 | 19 ～ 68 | 45 ～ 90 | 11 ～ 45 |
| work material | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | - | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | Aluminum[◎] | General Steel[○] / Quenched and tempered steel[○] | General Steel[○] | - | - | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] |
| Blade shape type | Square | Square | Square | Square | Square | Square | Square | Square | - | Square | Square | Square | Roughing | Square | Square | Roughing | Roughing | Square | For Keyway | Square | Square | Square | Square | Square | - | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing |
| Number of flutes(sheet) | 4 | 4 | 4 | 2 | 2 | 4 | 4 | 4 | - | 2 | 2 | 4 | 4 ～ 6 | 4 | 2 | 4 ～ 5 | 4 ～ 6 | 2 | 2 | 4 | 1 | 2 | 2 | 2 | - | 3 ～ 5 | 3 ～ 5 | 4 ～ 5 | 3 ～ 4 | 3 ～ 6 | 3 ～ 5 | 4 ～ 5 | 3 ～ 4 | 3 ～ 6 | 3 ～ 5 | 4 ～ 5 | 3 ～ 4 | 3 ～ 6 | 3 ～ 6 | 4 ～ 6 | 3 ～ 4 | 3 ～ 5 | 3 ～ 5 | 4 | 3 ～ 4 |
| Tool Material Type | Alloy HSS | Cobalt HSS | Cobalt HSS | Alloy HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | - | Cobalt HSS | Alloy HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Powder high-speed steel | Cobalt HSS | Alloy HSS | Alloy HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | High-speed steel | High-speed steel | - | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel |
| Machining Application | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side | Plane / Side / Groove / Countersinking | - | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove / Plunging (Z feed) | Other | Plane / Side / Groove / Inclined Cuts | Groove | Plane / Side / Groove / Inclined Cuts | - | - | - | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts |
| Shank diameter (d)(mm) | 6 ～ 42 | 6 ～ 32 | 10 ～ 32 | 6 ～ 42 | 6 ～ 42 | 6 ～ 32 | 6 ～ 42 | 20 ～ 42 | - | 6 ～ 25 | 6 ～ 25 | 6 ～ 32 | 6 ～ 42 | 6 ～ 32 | 6 ～ 42 | 9 ～ 24 | 6 ～ 42 | 6 ～ 42 | 6 ～ 25 | 6 ～ 32 | 8 ～ 12 | 6 ～ 32 | 4 ～ 32 | - | - | 6 ～ 25 | 6 ～ 25 | 10 ～ 25 | 6 ～ 25 | 6 ～ 32 | 6 ～ 25 | 10 ～ 25 | 6 ～ 25 | 6 ～ 32 | 6 ～ 25 | 10 ～ 25 | 6 ～ 25 | 6 ～ 42 | 6 ～ 42 | 10 ～ 42 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 10 ～ 25 | 6 ～ 25 |
| Coating | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiN | Non-Coated | Non-Coated | Non-Coated | - | TiCN / Non-Coated | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | Non-Coated | - | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiCN | TiCN | TiCN | TiCN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | Non-Coated | Non-Coated | Non-Coated |
| Overall Length (L)(mm) | 70 ～ 400 | 60 ～ 195 | 125 ～ 285 | 42 ～ 180 | 50 ～ 160 | 70 ～ 235 | 60 ～ 395 | 180 ～ 300 | - | 50 ～ 120 | 65 ～ 180 | 60 ～ 210 | 60 ～ 160 | 50 ～ 150 | 80 ～ 350 | 100 ～ 160 | 60 ～ 214 | 53 ～ 215 | 50 ～ 100 | 50 ～ 150 | 80 ～ 100 | 60 ～ 170 | 35 ～ 160 | 115 ～ 288 | - | 57 ～ 121 | 63 ～ 144 | 95 ～ 166 | 80 ～ 160 | 57 ～ 133 | 63 ～ 144 | 95 ～ 166 | 80 ～ 160 | 57 ～ 133 | 63 ～ 144 | 95 ～ 166 | 80 ～ 160 | 57 ～ 177 | 63 ～ 214 | 95 ～ 252 | 80 ～ 160 | 57 ～ 121 | 63 ～ 144 | 95 ～ 166 | 80 ～ 160 |
| Torsion Angle (θ) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | - | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Other | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | No torsion | No torsion | - | - | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) |
| Base Blade Y/N | Available | - | - | Available | - | - | Available | Available | - | Available | - | - | - | - | - | - | - | Available | Available | Available | Available | Available | - | - | - | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 28 ～ 66 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| shank | - | Straight | Straight | - | - | Straight | - | - | - | - | - | - | - | Straight | Straight | Straight | Straight | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
![[AlCr-based coat] Carbide 4-blade End Mill EA824RD-3.0](http://uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007523228_002.jpg?$product_view_c$)
Loading...
Filter by:
Stock
-
- Show only stock items
-
Blade diameter (D)(φ)
-
0.45～0.95
- 0.45
- 0.8
- 0.9
- 0.95
-
1～1.9
- 1
- 1/2
- 1.05
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.59
- 1.6
- 1.7
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.38
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.97
- 3
- 3/4
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 3.97
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.76
- 4.8
- 4.9
-
5～5.9
- 5
- 5/8
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.56
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.05
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.94
- 7
- 7/8
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
- 7.94
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.53
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.11
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.7
- 15.8
- 15.88
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.46
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.9
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.64
- 20.7
- 20.8
- 20.9
-
21～21.9
- 21
- 21.1
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.7
- 21.8
- 21.9
-
22～22.9
- 22
- 22.1
- 22.2
- 22.23
- 22.3
- 22.4
- 22.5
- 22.6
- 22.7
- 22.8
- 22.9
-
23～23.9
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.7
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.1
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.7
- 24.8
- 24.9
-
25～25.9
- 25
- 25.1
- 25.2
- 25.3
- 25.4
- 25.5
- 25.6
- 25.7
- 25.8
- 25.9
-
26～26.9
- 26
- 26.1
- 26.2
- 26.3
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
- 26.9
-
27～27.9
- 27
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7
- 27.8
- 27.9
-
28～28.9
- 28
- 28.1
- 28.2
- 28.3
- 28.4
- 28.5
- 28.6
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.6
- 29.7
- 29.8
- 29.9
-
30～30.9
- 30
- 30.1
- 30.2
- 30.3
- 30.4
- 30.5
- 30.6
- 30.7
- 30.8
- 30.9
-
31～31.9
- 31
- 31.1
- 31.2
- 31.3
- 31.4
- 31.5
- 31.6
- 31.7
- 31.75
- 31.8
- 31.9
-
32～32.9
- 32
- 32.1
- 32.2
- 32.3
- 32.4
- 32.5
- 32.6
- 32.7
- 32.8
- 32.9
-
33～33.9
- 33
- 33.1
- 33.2
- 33.3
- 33.4
- 33.5
- 33.6
- 33.7
- 33.8
- 33.9
-
34～34.9
- 34
- 34.1
- 34.2
- 34.3
- 34.4
- 34.5
- 34.6
- 34.7
- 34.8
- 34.9
-
35～35.9
- 35
- 35.1
- 35.2
- 35.3
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
- 35.9
-
36～36.9
- 36
- 36.1
- 36.2
- 36.3
- 36.4
- 36.5
- 36.6
- 36.7
- 36.8
- 36.9
-
37～37.9
- 37
- 37.1
- 37.2
- 37.3
- 37.4
- 37.5
- 37.6
- 37.7
- 37.8
- 37.9
-
38～38.9
- 38
- 38.1
- 38.2
- 38.3
- 38.4
- 38.5
- 38.6
- 38.7
- 38.8
- 38.9
-
39～39.9
- 39
- 39.1
- 39.2
- 39.3
- 39.4
- 39.5
- 39.6
- 39.7
- 39.8
- 39.9
-
40～40.9
- 40
- 40.1
- 40.2
- 40.3
- 40.4
- 40.5
- 40.6
- 40.7
- 40.8
- 40.9
-
41～41.9
- 41
- 41.1
- 41.2
- 41.3
- 41.4
- 41.5
- 41.6
- 41.7
- 41.8
- 41.9
-
42～42.9
- 42
- 42.1
- 42.2
- 42.3
- 42.4
- 42.5
- 42.6
- 42.7
- 42.8
- 42.9
-
43～43.9
- 43
- 43.1
- 43.2
- 43.3
- 43.4
- 43.5
- 43.6
- 43.7
- 43.8
- 43.9
-
44～44.9
- 44
- 44.1
- 44.2
- 44.3
- 44.4
- 44.5
- 44.6
- 44.7
- 44.8
- 44.9
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
85
-
90
-
95
-
100
[2.7-3/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-4/0.01φ Unit(s)][4.05-16/0.01φ Unit(s)][17-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]
-
-
Blade length (ℓ)(mm)
-
work material
-
Blade shape type
-
Number of flutes(sheet)
-
Tool Material Type
-
Machining Application
-
Shank diameter (d)(mm)
-
Coating
-
Overall Length (L)(mm)
-
Torsion Angle (θ)
-
Base Blade Y/N
-
Underneck length (ℓ1)(mm)
-
shank
Brand
CAD data type
-
- 2D
- 3D
Categories related to Square HSS End Mills
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.