Holding Tools for O.D. Tuning (Application: End Face)

• 

  TUNGALOY

  Holder for Outer Diameter Machining PCLNR/L

  [Features]· Lever Lock Type· Approach Angle: 95° · Turning Insert Diamond 80°, Negative Type Insert Used

  Read more

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	End Face	Lever lock	Right-hand / Left-hand	Negative	16 ～ 32	16 ～ 32

  Regular price (excluding VAT):

  127.56 €～

  Standard shipping days:

  6 working days

  Configure now
• 

  KYOCERA

  DDJN Type (Outer Diameter Machining / Profiling)

  [Features] Machining applications: Outside diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert clearance angle: negative 0° (N); clamping method: double clamping (D).

  Read more

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	End Face	Cable clamp	Right-hand	Negative	-	-

  Regular price (excluding VAT):

  114.75 €

  Standard shipping days:

  6 working days

  Configure now
• 

  SANDVIK

  Shank Tool Bit / T-Max P Lever Clamp, PSSNR/L

  [Features]The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Read more

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  S (Rectangular)	End Face	Lever lock	Left-hand	Negative	40	40

  Regular price (excluding VAT):

  297.33 €

  Standard shipping days:

  6 working days

  Configure now
• 

  SANDVIK

  T-Max P Cutting Unit For Turning, C-PCLNR / L-12HP

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	End Face	-	Right-hand / Left-hand	-	-	-

  Regular price (excluding VAT):

  967.05 €

  Standard shipping days:

  8 working days

  Configure now
• 

  SANDVIK

  Coromant Capto, Cutting Head, CoroTurn RC Double Clamp, DDMNL

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	End Face	Cable clamp	Left-hand	-	-	-

  Regular price (excluding VAT):

  617.16 €～

  Standard shipping days:

  6 working days

  Configure now
• 

  SANDVIK

  Sandvik, T-Max P, Cutting Unit, Turning, C-PCLNR/L-HP

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	End Face	Pin Lock	Right-hand / Left-hand	Negative	-	-

  Regular price (excluding VAT):

  601.32 €～

  Standard shipping days:

  6 working days

  Configure now
• 

  SANDVIK

  Sandvik, T-Max P, Cutting Unit, Turning, DWLNR/L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  W (Hexagonal Type)	End Face	Cable clamp	Right-hand / Left-hand	Negative	-	-

  Regular price (excluding VAT):

  345.98 €～

  Standard shipping days:

  6 working days

  Configure now
• 

  SANDVIK

  Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DWLNR / L

  [Features]A high-rigidity double clamp holder for turning. Extremely easy to handle. Swap out inserts and shims using just the one wrench. Inserts are easy to swap out, even from the backside of the holder. A wide variety of insert types can be mounted by swapping out the clamp set and shims. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Read more

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  W (Hexagonal Type)	End Face	Cable clamp	Right-hand / Left-hand	Negative	16 ～ 32	16 ～ 32

  Regular price (excluding VAT):

  135.05 €～

  Standard shipping days:

  6 working days

  Configure now
• 

  SANDVIK

  Outer-Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DCLNR / L

  [Features]A highly rigid double clamp cutting head for lathe turningSupports the use of internal coolantHigh tool rigiditySupports the use of negative insertsSupports everything from roughing through to finishing

  Read more

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	End Face	Cable clamp	Right-hand / Left-hand	Negative	-	-

  Regular price (excluding VAT):

  345.98 €～

  Standard shipping days:

  6 working days

  Configure now
• 

  SANDVIK

  Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, TR-C-D13JCR / L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	End Face	Clamp-on	Right-hand / Left-hand	Pozidriv	-	-

  Regular price (excluding VAT):

  361.52 €～

  Standard shipping days:

  6 working days

  Configure now
• 

  SANDVIK

  Multi-Function Tool CoroPlex TT Twin Tool, CoroTurn RC Double Clamp, C-T-DCL / M

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape) / Other	End Face	Cable clamp	Left-hand	-	-	-

  Regular price (excluding VAT):

  1,037.29 €～

  Standard shipping days:

  6 working days

  Configure now
• 

  TUNGALOY

  Type M TAC Tool Bit for Outer Diameter, Multi-Clamp Type MWLNR/L

  Negative for Outer Diameter and End Face Cutting

  Read more

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  W (Hexagonal Type)	End Face	Other	Right-hand / Left-hand	Negative	20 ～ 25	20 ～ 25

  Regular price (excluding VAT):

  128.60 €～

  Standard shipping days:

  6 working days

  Configure now
• 

  TUNGALOY

  Turning A, One/Double Type DCLNR/L

  Negative for Outer Diameter and End Face Cutting

  Read more

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	End Face	Cable clamp	Right-hand / Left-hand	Negative	20 ～ 32	20 ～ 25

  Regular price (excluding VAT):

  128.60 €～

  Standard shipping days:

  6 working days

  Configure now
• 

  TUNGALOY

  Turning A, One/Double Type DWLNR/L

  Negative for Outer Diameter and End Face Cutting

  Read more

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  W (Hexagonal Type)	End Face	Cable clamp	Right-hand / Left-hand	Negative	20 ～ 32	20 ～ 25

  Regular price (excluding VAT):

  128.60 €～

  Standard shipping days:

  6 working days

  Configure now
• 

  ISCAR

  Tool Block SGTBF (Right-Angle Type)

  [Features] -Right-angled tool block.[Features] -Cut-off, deep grooving, flange grooving.

  Read more

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  Other	End Face	Other	No-hand	-	25 ～ 32	-

  Regular price (excluding VAT):

  247.61 €

  Standard shipping days:

  8 working days

  Configure now
• 

  ISCAR

  Tool Block SGTBR/L (Simple Mounting Type)

  Easy to mount tool block. For fixing.The blade can be replaced with 1 screw.

  Read more

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  Other	End Face	Other	Right-hand / Left-hand	-	19 ～ 25	-

  Regular price (excluding VAT):

  205.40 €～

  Standard shipping days:

  8 working days

  Configure now
• 

  ISCAR

  Holder for Outer Diameter Machining (Lever Lock Clamp) PCLNR/L / PCBNR/L

  [Features] Can be used for external machining.[Features] Lever clamp.

  Read more

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	End Face	Lever lock	Right-hand / Left-hand	-	20 ～ 32	20 ～ 32

  Regular price (excluding VAT):

  120.69 €～

  Standard shipping days:

  8 working days

  Configure now
• 

  TUNGALOY

  Model A Negative / Clamp-on Style ACLNR/L

  [Specifications]· Clamp Shape: Double Clamp· Insert Used: CN□□1606□□/CN□□1906□□· Rake Angle: Negative

  Read more

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  Other	End Face	Cable clamp	Right-hand / Left-hand	Negative	-	-

  Regular price (excluding VAT):

  126.65 €～

  Standard shipping days:

  6 working days

  Configure now
• 

  KYOCERA

  DCLN Type (Outer Diameter Machining / End Machining)

  [Features] Machining applications: Outside diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert clearance angle: negative 0° (N); clamping method: double clamping (D).

  Read more

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	End Face	Cable clamp	Right-hand / Left-hand	Negative	20 ～ 25	20 ～ 25

  Regular price (excluding VAT):

  118.16 €～

  Standard shipping days:

  6 working days

  Configure now
• 

  KYOCERA

  PCLN Type (External Diameter / End-Face Machining)

  [Features] Machining applications: Outside diameter and flange; compatible insert shape: C (80° two-bolt); relief angle: negative 0° (N); clamping method: pin lock (P), non-ISO standard.

  Read more

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	End Face	Lever lock	Right-hand / Left-hand	Negative	25 ～ 32	25 ～ 32

  Regular price (excluding VAT):

  121.32 €～

  Standard shipping days:

  6 working days

  Configure now
• 

  KYOCERA

  PTFN Type (End Face Machining)

  [Features] Machining applications: Flange; compatible insert shape: T (triangle); compatible clearance angle: negative 0° (N); clamping method: pin lock (P).

  Read more

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  T (Triangle)	End Face	Lever lock	Right-hand	Negative	20	20

  Regular price (excluding VAT):

  111.86 €

  Standard shipping days:

  6 working days

  Configure now
• 

  KYOCERA

  PRGC / PRXC / PRGN Types (External Diameter, End Face, Profiling)

  [Features] Machining applications: Outside diameter, flange and profiling; compatible insert shape: R (round); compatible insert clearance angle: positive 7 (C), negative 0° (N); clamping method: pin lock (P), non-ISO standard.

  Read more

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  R (Circular)	End Face	Lever lock	Right-hand	Pozidriv	-	-

  Regular price (excluding VAT):

  152.34 €

  Standard shipping days:

  6 working days

  Configure now
• 

  KYOCERA

  CCLN Type (Outer Diameter Machining / End Machining)

  [Features] Machining applications: Outer diameter and flange; compatible insert shape: C (80° with two screws); compatible insert clearance angle: negative 0° (N); clamping method: clamp-on (C).

  Read more

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	End Face	Clamp-on	Right-hand	Negative	-	-

  Regular price (excluding VAT):

  132.00 €

  Standard shipping days:

  6 working days

  Configure now
• 

  KYOCERA

  CELN Type (Outer Diameter Machining / End Machining)

  Outer diameter holder for clamp-on type ceramic tools.

  Read more

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  Other	End Face	Clamp-on	Right-hand	Negative	-	-

  Regular price (excluding VAT):

  92.93 €

  Standard shipping days:

  9 working days

  Configure now
• 

  KYOCERA

  SCLC Type (External Diameter / End-Face Machining)

  [Features] Machining applications: Outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamping method: screw-on (S).

  Read more

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	End Face	Screw-on	Right-hand / Left-hand	Pozidriv	12 ～ 20	12 ～ 20

  Regular price (excluding VAT):

  103.47 €～

  Standard shipping days:

  6 working days

  Configure now
• 

  KYOCERA

  SVPB Type (Outer Diameter, End Surface, Profile, Relief Machining)

  [Features] Machining applications: Outer diameter, flange and profiling; compatible insert shape: V (35° with two bolts); compatible insert clearance angle: positive 5° (B); clamping method: screw-on (S).

  Read more

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	End Face	Screw-on	Left-hand	Pozidriv	20 ～ 25	20 ～ 25

  Regular price (excluding VAT):

  129.74 €～

  Standard shipping days:

  6 working days

  Configure now
• 

  SANDVIK

  T-Max Shank Bit

  Unique shape exhibits high performance

  Read more

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  Other	End Face	Clamp-on	Right-hand	Negative	40	25

  Regular price (excluding VAT):

  340.93 €

  Standard shipping days:

  6 working days

  Configure now
• 

  SANDVIK

  CORO-TURN RC, Shank Bit for Negative Tips

  Unique shape exhibits high performance

  Read more

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	End Face	Cable clamp	Right-hand / Left-hand	Negative	20 ～ 32	20 ～ 32

  Regular price (excluding VAT):

  150.12 €～

  Standard shipping days:

  6 working days

  Configure now
• 

  SANDVIK

  COROMANT CAPTO, Cutting Head for CORO-TURN RC Negative Tip

  Unique shape exhibits high performance

  Read more

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	End Face	Cable clamp	Right-hand / Left-hand	Negative	-	-

  Regular price (excluding VAT):

  361.52 €～

  Standard shipping days:

  6 working days

  Configure now
• 

  SANDVIK

  COROMANT CAPTO, Cutting Head for CORO-TURN RC

  Unique shape exhibits high performance

  Read more

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	End Face	Cable clamp	No-hand	-	-	-

  Regular price (excluding VAT):

  561.34 €～

  Standard shipping days:

  8 working days

  Configure now
• 

  SANDVIK

  Tool Bit for Turning Processing

  Unique shape exhibits high performance

  Read more

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  S (Rectangular)	End Face	Lever lock	Right-hand / Left-hand	-	-	-

  Regular price (excluding VAT):

  591.62 €

  Standard shipping days:

  6 working days

  Configure now
• 

  SANDVIK

  Shank Tool Bit T-Max P Lever Clamp PCLNR / L

  [Features]The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Read more

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	End Face	Lever lock	Right-hand	Negative	20	20

  Regular price (excluding VAT):

  156.84 €

  Standard shipping days:

  6 working days

  Configure now
• 

  SANDVIK

  T-Max P Cutting Unit For Turning

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	End Face	-	Left-hand	-	-	-

  Regular price (excluding VAT):

  561.34 €

  Standard shipping days:

  8 working days

  Configure now
• 

  SANDVIK

  T-Max P Cutting Unit For Turning, C-DDUNR / L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	End Face	-	Left-hand	-	-	-

  Regular price (excluding VAT):

  401.49 €

  Standard shipping days:

  6 working days

  Configure now
• 

  SANDVIK

  T-Max P Cutting Unit For Turning, C-DRSNR / L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  R (Circular)	End Face	-	Right-hand / Left-hand	-	-	-

  Regular price (excluding VAT):

  401.49 €

  Standard shipping days:

  6 working days

  Configure now
• 

  SANDVIK

  T-Max P, Turning Cutting Unit, C8-PRSCL

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  R (Circular)	End Face	-	Left-hand	-	-	-

  Regular price (excluding VAT):

  499.58 €

  Standard shipping days:

  8 working days

  Configure now
• 

  SANDVIK

  T-Max P, Turning Cutting Unit, C8-PRSCR

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  R (Circular)	End Face	-	Right-hand	-	-	-

  Regular price (excluding VAT):

  499.58 €

  Standard shipping days:

  6 working days

  Configure now
• 

  SANDVIK

  T-Max S Shank Tool Bit For Turning, 177.9

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  T (Triangle)	End Face	-	No-hand	-	20 ～ 25	9 ～ 13

  Regular price (excluding VAT):

  173.81 €～

  Standard shipping days:

  6 working days

  Configure now
• 

  SANDVIK

  T-Max S Shank Tool Bit For Turning, CTFPR / L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  T (Triangle)	End Face	Clamp-on	Right-hand / Left-hand	-	12 ～ 20	12 ～ 20

  Regular price (excluding VAT):

  156.84 €～

  Standard shipping days:

  6 working days

  Configure now
• 

  SANDVIK

  T-Max S Cartridge For Turning Tool, CSKPR / L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  S (Rectangular)	End Face	Clamp-on	Left-hand	-	12	12

  Regular price (excluding VAT):

  156.84 €

  Standard shipping days:

  6 working days

  Configure now
• 

  SANDVIK

  CoroTurn RC Double Clamp, DSSNR / L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  S (Rectangular)	End Face	Cable clamp	Right-hand / Left-hand	Negative	20 ～ 40	20 ～ 40

  Regular price (excluding VAT):

  156.84 €～

  Standard shipping days:

  6 working days

  Configure now
• 

  SANDVIK

  CoroTurn HP Coromant Capto, Cutting Head For Inner Diameter Turning, C-PCLNR / L.-HP

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	End Face	Lever lock	Right-hand / Left-hand	-	-	-

  Regular price (excluding VAT):

  517.49 €～

  Standard shipping days:

  6 working days

  Configure now
• 

  SANDVIK

  CoroPlex TT Multi-Function Turning Tool, C-TB-CN

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	End Face	-	No-hand	-	0	-

  Regular price (excluding VAT):

  1,671.87 €

  Standard shipping days:

  8 working days

  Configure now
• 

  SANDVIK

  Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, SRSCR / L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  R (Circular)	End Face	Clamp-on	Right-hand / Left-hand	Pozidriv	-	-

  Regular price (excluding VAT):

  361.52 €～

  Standard shipping days:

  6 working days

  Configure now
• 

  SANDVIK

  Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, C-S-CN / BL

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	End Face	Clamp-on	No-hand	-	-	-

  Regular price (excluding VAT):

  644.90 €

  Standard shipping days:

  8 working days

  Configure now