SANDVIK
SANDVIK CoroTurn 111 Boring Bar for Back Boring
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
- | 21.59 | - | Right-hand | - | 203.2 | - | 15.88 | - |
SANDVIK
CoroBore 825, Fine Boring Tools, Boring Tool Set, 825-TC
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | 19 ~ 136 | Internal Diameter | - | Screw-on | - | - | - | - |
SANDVIK
SANDVIK Cylindrical Shank to CoroTurn SL Quick Change Damped Adaptor
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
- | 99.9998 ~ 275 | - | Right-hand / IKOU | - | 880 ~ 4000 | - | 11.6 | 80 ~ 80 | 250 | - |
SANDVIK
SANDVIK Steel Blank with Coromant Capto Coupling
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
- | - | - | IKOU | - | 60 ~ 200 | - | 32 ~ 160 | - |
BIG KAISER
Insert Holder For EWN Boring Head Replacement
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | - | Internal Diameter | - | - | - | - | - | - |
SANDVIK
SANDVIK CoroBore 826 Fine Boring Head
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
- | 150 | - | - | - | 24 | - | 34 | - |
SANDVIK
SANDVIK CoroBore 825 Fine Boring Tool
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
- | 19 ~ 136 | - | IKOU | - | 25 ~ 200 | - | 18 ~ 25 | - |
BIG KAISER
EWN Boring Head Set (For Finishing / Insert Holder Type)
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | 20 ~ 100 | Internal Diameter | - | - | - | - | - | - |
BIG KAISER
SW Boring Head (Rough Highly Rigid Type)
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
- | 20 ~ 148 | Internal Diameter | - | - | - | - | - | - |
SANDVIK
SANDVIK CoroThread 266 Boring Bar for Thread Turning
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
- | 20 ~ 63 | - | Right-hand / Left-hand | - | 125 ~ 406.4 | - | 15.88 ~ 50.8 | - |
BIG KAISER
EWB Boring Head (High-Speed Finishing / Automatic Balance Compensation Mechanism Built-In)
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | 32 ~ 85 | Internal Diameter | - | - | - | - | - | - |
SANDVIK
SANDVIK Coromant Capto to Fine Boring Head Adaptor
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
- | 3 | - | IKOU | - | 48 ~ 85 | - | - | - |
SANDVIK
SANDVIK CoroTurn 107 Boring Bar for Back Boring
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
- | 26.6954 ~ 40.1066 | - | Right-hand / Left-hand | - | 250 ~ 304.8 | - | 19.05 ~ 31.75 | - |
SANDVIK
SANDVIK Coromant Capto Extension Adaptor
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
- | - | - | IKOU | - | - | - | - | - |
SANDVIK
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
- | - | Internal Diameter | Right-hand / Left-hand | - | 24.1 ~ 62.7 | - | 16 ~ 32 | - |
SANDVIK
CoroCut MB Solid-Carbide Boring Tool Bit MB-E
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
- | - | Internal Diameter | - | - | - | - | - | - |
SANDVIK
CoroTurn XS Insert Bar for Turning CXS-..T098
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
- | 0.3 ~ 7.2 | Internal Diameter / Inner diameter profiling | Right-hand / Left-hand | - | 27.25 ~ 72.25 | - | 4 ~ 7 | - |
SANDVIK
Solid-Carbide Boring Tool Bit, CoroTurn 111, Screw Clamp, E...-SCLPR / L
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
C (80° Diamond-Shape) | 10 ~ 16 | Internal Diameter | Right-hand / Left-hand | Screw-on | 125 ~ 180 | 11° | 8 ~ 12 | 48 ~ 72 |
SANDVIK
Sandvik COROMANT CAPTO Manual Clamp Holder
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - | - |
SANDVIK
SANDVIK CoroTurn 111 Boring Bar for Turning
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
- | 6.604 ~ 30.5054 | - | Right-hand / Left-hand | - | 80 ~ 304.8 | - | 4.78 ~ 25.4 | - |
SANDVIK
SANDVIK CoroBore 825 Fine Boring Head
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
- | 150 | - | - | - | - | - | - | - |
SANDVIK
SANDVIK Coromant Capto to VL Adaptor
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
- | - | - | IKOU | - | - | - | - | - |
KYOCERA
S...SVN-XN Type (Round Shank, Standard Type)
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
- | - | - | Right-hand | - | 100 | - | - | - |
SANDVIK
CORO-TURN SL, 570-Type Cutting Head
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
D (55° Diamond-Shape) | 50 ~ 80 | Internal Diameter | Right-hand / Left-hand | - | 32 ~ 40 | - | 40 ~ 60 | - |
SANDVIK
Cutting Head for CORO-TURN SL CORO-TURN 107
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
C (80° Diamond-Shape) | 20 ~ 32 | Internal Diameter | Right-hand / Left-hand | Screw-on | - | - | 16 ~ 25 | 20 |
SANDVIK
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
C (80° Diamond-Shape) | 25 ~ 50 | Internal Diameter | Right-hand / Left-hand | - | 32 ~ 55 | - | - | - |
SANDVIK
CoroTurn SL, 570 Type T-Max P, Head for Back Boring
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
D (55° Diamond-Shape) | 50 | Internal Diameter / Inner diameter profiling / Pull | Left-hand | Cable clamp | - | 0° | 40 | 20 |
SANDVIK
Cartridge CoroTurn 107 Screw Clamp STFCR / L
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | 20 ~ 55 | Internal Diameter / Inner diameter profiling | Right-hand / Left-hand | Screw-on | 25 ~ 63 | - | - | - |
SANDVIK
CoroTurn XS Insert Bar For Profiling CXS-..TE98 Profiling
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
- | 4.2 ~ 6.2 | Internal Diameter / Inner diameter profiling | Right-hand / Left-hand | - | 37.26 ~ 52.25 | - | 4 ~ 6 | - |
SANDVIK
CoroTurn XS Insert Bar For Back Boring B090
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
- | 1.95 ~ 7.2 | Internal Diameter / Inner diameter profiling / Pull | Right-hand | - | 52.25 | - | 5 ~ 7 | - |
SANDVIK
CoroTurn XS Insert Bar For Grooving CXS-..G
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
- | 4.2 ~ 7.2 | Internal Diameter / Inner diameter profiling | Right-hand / Left-hand | - | 27.3 ~ 57.8 | - | 4 ~ 7 | - |
SANDVIK
CoroTurn XS Insert Bar For Face Grooving CXS-..F
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
- | 6.2 | Internal Diameter | Right-hand / Left-hand | - | 37.3 | - | 6 | - |
SANDVIK
Cartridge T-Max P Lever Clamp For Negative Inserts PTFNR / L
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | 50 ~ 70 | Internal Diameter | Right-hand / Left-hand | Lever lock | 55 ~ 70 | - | - | - |
SANDVIK
CoroTurn SL, Coromant Capto, Short, Inner Diameter Turning, C4/C5/C6-570-2C-R/L
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
- | 20 ~ 50 | Internal Diameter | Right-hand / Left-hand | - | - | - | - | - |
SANDVIK
CoroBore 825, Fine Boring Tool Cylindrical Shank 825-TC
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | 19 ~ 28 | Internal Diameter | - | Screw-on | - | - | - | - |
SANDVIK
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
T (Triangle) | - | Internal Diameter | Right-hand | Screw-on | 15.9 | - | - | 11 |
SANDVIK
Coromant Capto Cutting Head For Inner-Diameter Turning DCLN / DDUN
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
C (80° Diamond-Shape) | 25 ~ 50 | Internal Diameter | Right-hand / Left-hand | Cable clamp | - | 0° | - | - |
SANDVIK
Coromant Capto Cutting Head For Inner-Diameter Turning PDUNR / L
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
D (55° Diamond-Shape) | 32 ~ 63 | Internal Diameter / Inner diameter profiling | Right-hand / Left-hand | Screw-on | - | - | - | - |
SANDVIK
Coromant Capto Cutting Head For Inner-Diameter Turning PSKNR / L
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
S (Rectangular) | 32 ~ 63 | Internal Diameter | Right-hand / Left-hand | Screw-on | - | - | - | - |
SANDVIK
Coromant Capto Cutting Head For Inner-Diameter Turning SVQBR / L
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
V (35° Diamond-Shaped) | 22 ~ 63 | Internal Diameter / Inner diameter profiling | Right-hand / Left-hand | Screw-on | - | 5° | - | - |
SANDVIK
DuoBore Twin-Edge Boring Tool 391.68A
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
C (80° Diamond-Shape) / T (Triangle) | 25 ~ 123 | Internal Diameter | - | - | - | - | - | - |
KYOCERA
Kyocera, Inner Diameter Boring Holder, A-DCLN Type
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
- | - | Internal Diameter | - | Cable clamp | - | - | - | - |
SANDVIK
SANDVIK Coromant Capto Reduction Adaptor
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
- | - | - | IKOU | - | 90 ~ 110 | - | - | - |
SANDVIK
SANDVIK CoroTurn 107 Boring Bar for Turning
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
- | 8.6868 ~ 64.7954 | - | Right-hand / Left-hand / IKOU | - | 80 ~ 355.6 | - | 6.35 ~ 50.8 | - |
SANDVIK
SANDVIK Coromant Capto to Weldon Adaptor
Applicable Tip Shape | Minimum Machining Diameter | Application | Cutting Direction | Clamp Shape | Overall Length L1 | Clearance angle | Shank diameter | Protrusion length (L/D) |
---|---|---|---|---|---|---|---|---|
- | - | - | IKOU | - | - | - | 6 ~ 50 | - |