Configure

Clear all

Phoenix Head Replaceable Type Drills

An indexable drill is a drill with a replaceable tip attached to the tip of the drill. Drills are tools that perform drilling, which is indispensable for machining, however, if used for a long time, the cutting edge will wear. In this case, you must either grind the cutting edge to improve cutting performance, or replace the drill body before using it. With the indexable drill, if the cutting edge becomes worn, it is possible to replace only the insert at the tip instead of the drill body, so maintenance work time and cost reduction can be expected, especially when the machining diameter is large. There are many variations in the shape and size of the drill, and the shape and material of the tip to be mounted also vary. There are drills that can handle multiple inserts, and various work materials and holes can be machined.
  • Magic Drill DRA Type Tip

      KYOCERA

      Magic Drill DRA Type Tip

      It is an insert for MagicDrill DRA type that has high centripetal force with a special 2-step tip angle and achieves excellent cylindricity, roundness and surface roughness in steel machining.
      Read more
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      9 ~ 25-General Steel[○/◎] / Stainless Steel[○/◎] / Cast Iron[○/◎]---Available--
      Regular price (excluding VAT):
      82.29 €
      Standard shipping days:
      6 working days
      Configure now
    • Super U Drill - Cylindrical Shank

        SANDVIK

        Super U Drill - Cylindrical Shank

        With an indexable drill, balanced cutting and table feed up to twice as high are possible through stepped biting at the entrance, improving the precision of the processed hole.
        Read more
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        12.5 ~ 6328 ~ 220General Steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]-91 ~ 331End Mill Shank / Straight Shank--N/A
        Regular price (excluding VAT):
        616.76 €
        Standard shipping days:
        6 working days
        Configure now
      • SANDVIK CoroDrill 880 Indexable Insert Drill

          SANDVIK

          SANDVIK CoroDrill 880 Indexable Insert Drill

          [Specifications]・Drill type: Indexable insert drill・eClass-5.1: 21010103[Features]・Wiper geometry for best surface finish or higher feed possibilities・Optimized chip channels for accelerated chip evacuation・Easy identification thanks to laser marking with drill, insert, and screw codes on the drill shank・Two or four cutting edges depending on drill diameter・Optimized geometries assure high performance in most materials・Optimized grades assure longer insert tool life
          Read more
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          12 ~ 84212.77 ~ 339.15General Steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]-295 ~ 404----
          Regular price (excluding VAT):
          613.85 €
          Standard shipping days:
          5 working days
          Configure now
        • SANDVIK CoroDrill 870 Exchangeable Tip Drill

            SANDVIK

            SANDVIK CoroDrill 870 Exchangeable Tip Drill

            [Specifications]・eClass-5.1: 21010103[Features]・Secure and reliable cutting process・High penetration rates and excellent hole quality・Long, predictable tool life and high productivity・Low cost per hole・Internal coolant・Easy handling and secure tip changes・Optimized chip control and evacuation・Tailor Made options available for tool body and tips
            Read more
            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            10.00 - 10.49 ~ 31.00 - 33.00-General Steel[○] / Stainless Steel[○] / Cast Iron[○]------
            Regular price (excluding VAT):
            356.62 €
            Standard shipping days:
            5 working days
            Configure now
          • SANDVIK Coromant U Insert for Drilling

              SANDVIK

              SANDVIK Coromant U Insert for Drilling

              [Specifications]・Insert clearance angle: 7°・Grade type: Hard metal・eClass-5.1: 21011901
              Read more
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              --General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]------
              Regular price (excluding VAT):
              21.38 €
              Standard shipping days:
              5 working days
              Configure now
            • Super U Drill - Hole Drilling Tip

                SANDVIK

                Super U Drill - Hole Drilling Tip

                Ideal for machining requiring deep cutting and a highly rigid tip
                Read more
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                14~16 ~ 53~63-General Steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]------
                Regular price (excluding VAT):
                29.24 €
                Standard shipping days:
                6 working days
                Configure now
              • Sandvik Super U Drill - Cylindrical Shank

                  SANDVIK

                  Sandvik Super U Drill - Cylindrical Shank

                  [Features]· A Super U Drill.· Perfectly balanced cutting which engages the edge in steps improves hole drilling accuracy and table feed up to 200%.· Excellent roughness of machined surfaces can be realized by applying a wiper tip.[Applications]· For drilling of any workpiece.· Supports both drill rotation and workpiece rotation.
                  Read more
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  ---------
                  Regular price (excluding VAT):
                  782.91 €
                  Standard shipping days:
                  6 working days
                  Configure now
                • 2D Type Indexable Drill, P2D

                    OSG

                    2D Type Indexable Drill, P2D

                    Indexable drills that can stably perform hole drilling with 2D depth.
                    Read more
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    21 ~ 33.5-General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[○]Carbide121 ~ 160End Mill ShankN/ANon-CoatedAvailable
                    Regular price (excluding VAT):
                    316.60 €
                    Standard shipping days:
                    6 working days
                    Configure now
                  • SANDVIK CoroDrill 880 Insert for Drilling

                      SANDVIK

                      SANDVIK CoroDrill 880 Insert for Drilling

                      [Specifications]・Insert clearance angle: n/s・Grade type: Hard metal・eClass-5.1: 21011901[Features]・Wiper geometry for best surface finish or higher feed possibilities・Optimized chip channels for accelerated chip evacuation・Easy identification thanks to laser marking with drill, insert, and screw codes on the drill shank・Two or four cutting edges depending on drill diameter・Optimized geometries assure high performance in most materials・Optimized grades assure longer insert tool life
                      Read more
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      --General Steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]------
                      Regular price (excluding VAT):
                      20.54 €
                      Standard shipping days:
                      5 working days
                      Configure now
                    • Combat Z Drill
                      • Volume Discount

                      NIKKEN KOSAKUSHO

                      Combat Z Drill

                      [Features] You can conveniently drill holes with a powerful pilot drill.
                      Read more
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      --General Steel[○] / Cast Iron[○]------
                      Regular price (excluding VAT):
                      28.01 €
                      Standard shipping days:
                      7 working days
                      Configure now
                    • Tip for HT800WP Only 7632

                        GUHRING

                        Tip for HT800WP Only 7632

                        Chamfer blade insert for cast iron.
                        Read more
                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                        ---Carbide--AvailableTiAlNN/A
                        Regular price (excluding VAT):
                        66.06 €
                        Standard shipping days:
                        24 working days
                        Configure now
                      • Holder 3 x D HT800WP 4107

                          GUHRING

                          Holder 3 x D HT800WP 4107

                          [Features]· Enables stable machining with the reliable clamping method and highly rigid body.· Internal oil supply type.
                          Read more
                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                          --General Steel[◎] / High Hardness Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○]-101 ~ 254-N/A-Available
                          Regular price (excluding VAT):
                          411.81 €
                          Standard shipping days:
                          8 working days
                          Configure now
                        • SUMOCHAM (Head Replacement Type Drill Body) DCN-5D, Machining Diameter 6.0 mm–32.9 mm

                            ISCAR

                            SUMOCHAM (Head Replacement Type Drill Body) DCN-5D, Machining Diameter 6.0 mm–32.9 mm

                            The cutting force increases the clamping force of the head, which enables stable machining, and is a part for free-cutting steelOCHAM that achieves good internal lubrication through the coolant hole at the tip of the holder.
                            Read more
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            6.0~6.4 ~ 25.0~25.930 ~ 125General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]-89 ~ 224.5End Mill ShankN/A-N/A
                            Regular price (excluding VAT):
                            338.10 €
                            Standard shipping days:
                            6 working days
                            Configure now
                          • TIDC Head

                              TUNGALOY

                              TIDC Head

                              [Specifications]· Material Details: AH725· Tip Angle: 140°
                              Read more
                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              10 ~ 19.9--------
                              Regular price (excluding VAT):
                              111.97 €
                              Standard shipping days:
                              6 working days
                              Configure now
                            • Super U Drill (CoroDrill 880), CoroDrill 881, Reamer

                                SANDVIK

                                Super U Drill (CoroDrill 880), CoroDrill 881, Reamer

                                Unique shape exhibits high performance
                                Read more
                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                ---------
                                Regular price (excluding VAT):
                                586.77 €
                                Standard shipping days:
                                6 working days
                                Configure now
                              • Indexable Drill 3D Type P3D

                                  OSG

                                  Indexable Drill 3D Type P3D

                                  Indexable insert drill that can perform stable drilling with 3D depth.
                                  Read more
                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                  21 ~ 50.5-General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[○]Carbide142 ~ 252End Mill ShankN/ANon-CoatedAvailable
                                  Regular price (excluding VAT):
                                  355.70 €
                                  Standard shipping days:
                                  6 working days
                                  Configure now
                                • Aqua Drill EX VF Tip TVF

                                    NACHI(FUJIKOSHI)

                                    Aqua Drill EX VF Tip TVF

                                    A flat tip for insert drills that is ideal for high-efficiency, high-precision machining of large diameters.
                                    Read more
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    15.6 ~ 26.5-General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide---For General Steels (AlCrN, etc.)-
                                    Regular price (excluding VAT):
                                    121.43 €
                                    Standard shipping days:
                                    6 working days
                                    Configure now
                                  • Combat Z Drill Insert Tip

                                      NIKKEN KOSAKUSHO

                                      Combat Z Drill Insert Tip

                                      [Features]· An insert chip for Combat Z Drills.· It has a diamond shape at 86° and 2 corners each diagonally on the outer and inner circumferences, allowing a total of 4 corners to be used.
                                      Read more
                                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                      2.8 ~ 3.4-General Steel[○] / Cast Iron[○]---Available--
                                      Regular price (excluding VAT):
                                      17.23 €
                                      Standard shipping days:
                                      5 working days
                                      Configure now
                                    • Tip for HT800WP Only 4111

                                        GUHRING

                                        Tip for HT800WP Only 4111

                                        It is an insert for pilot hole with 145° tip angle.
                                        Read more
                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                        ---Carbide--AvailableOtherN/A
                                        Regular price (excluding VAT):
                                        111.60 €
                                        Standard shipping days:
                                        8 working days
                                        Configure now
                                      • Tip for HT800WP Only 4112

                                          GUHRING

                                          Tip for HT800WP Only 4112

                                          A widely applicable insert used for materials from general steel to stainless steel.
                                          Read more
                                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                          --General Steel[○]Carbide--AvailableOtherN/A
                                          Regular price (excluding VAT):
                                          111.60 €
                                          Standard shipping days:
                                          8 working days
                                          Configure now
                                        • Tip for HT800WP Only 4113

                                            GUHRING

                                            Tip for HT800WP Only 4113

                                            Insert dedicated for cast iron.
                                            Read more
                                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                            --Cast Iron[○]Carbide--AvailableOtherN/A
                                            Regular price (excluding VAT):
                                            116.63 €
                                            Standard shipping days:
                                            8 working days
                                            Configure now
                                          • Tip for HT800WP Only 4114

                                              GUHRING

                                              Tip for HT800WP Only 4114

                                              [Features]· Insert dedicated for aluminum.
                                              Read more
                                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                              --Aluminum[○]Carbide--N/A-N/A
                                              Regular price (excluding VAT):
                                              116.63 €
                                              Standard shipping days:
                                              8 working days
                                              Configure now
                                            • Tip for HT800WP Only 4115

                                                GUHRING

                                                Tip for HT800WP Only 4115

                                                [Features]· A dedicated insert for use with stainless steel.
                                                Read more
                                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                --Stainless Steel[○]Carbide--AvailableOtherN/A
                                                Regular price (excluding VAT):
                                                125.39 €
                                                Standard shipping days:
                                                8 working days
                                                Configure now
                                              • Tip for HT800WP Only 7635

                                                  GUHRING

                                                  Tip for HT800WP Only 7635

                                                  Insert for chamfering blades for aluminum.
                                                  Read more
                                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                  ---Carbide--N/A-N/A
                                                  Regular price (excluding VAT):
                                                  56.21 €
                                                  Standard shipping days:
                                                  24 working days
                                                  Configure now
                                                • Tip for HT800WP Only 7645

                                                    GUHRING

                                                    Tip for HT800WP Only 7645

                                                    An insert for chamfering blade which can be widely applied from general steel to stainless steel.
                                                    Read more
                                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                    ---Carbide--AvailableTiNN/A
                                                    Regular price (excluding VAT):
                                                    66.06 €
                                                    Standard shipping days:
                                                    24 working days
                                                    Configure now
                                                  • Tip for RT800WP Only 2485

                                                      GUHRING

                                                      Tip for RT800WP Only 2485

                                                      FIRE coated RT blade tip dedicated for RT800WP.
                                                      Read more
                                                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                      16 ~ 40.5--Carbide--AvailableOtherN/A
                                                      Regular price (excluding VAT):
                                                      119.16 €
                                                      Standard shipping days:
                                                      8 working days
                                                      Configure now
                                                    • Holder 1.5 x D HT800WP 4106

                                                        GUHRING

                                                        Holder 1.5 x D HT800WP 4106

                                                        [Features]· Also suitable for hole drilling up to 1.5D and drilling deep pilot holes.· Internal oil supply type.
                                                        Read more
                                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                        --General Steel[◎] / High Hardness Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○]-84 ~ 194-N/A-Available
                                                        Regular price (excluding VAT):
                                                        329.39 €
                                                        Standard shipping days:
                                                        8 working days
                                                        Configure now
                                                      • Holder 1 x D HT800WP 4105

                                                          GUHRING

                                                          Holder 1 x D HT800WP 4105

                                                          [Features]· Can be used for both hole drilling up to 1 X D and chamfering at the same time.· Suitable for deep pilot hole machining.· Internal oil supply type.
                                                          Read more
                                                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                          --General Steel[◎] / High Hardness Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○]-81 ~ 173-N/A-Available
                                                          Regular price (excluding VAT):
                                                          470.29 €
                                                          Standard shipping days:
                                                          24 working days
                                                          Configure now
                                                        • Holder 10 x D HT800WP 4110

                                                            GUHRING

                                                            Holder 10 x D HT800WP 4110

                                                            [Features]· Enables stable machining with the reliable clamping method and highly rigid body.· Unique groove shape and coolant duct position provide excellent chip discharge properties.· Internal oil supply type.
                                                            Read more
                                                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                            --General Steel[◎] / High Hardness Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○]-182 ~ 441-N/A-Available
                                                            Regular price (excluding VAT):
                                                            655.63 €
                                                            Standard shipping days:
                                                            8 working days
                                                            Configure now
                                                          • Holder 3 x D with Oil Hole RT800WP 5242

                                                              GUHRING

                                                              Holder 3 x D with Oil Hole RT800WP 5242

                                                              [Features]· Unique tip clamping method enables tips to be quickly and easily interchanged even within the machine.· Can always machine with a new cutting edge, so productivity and consistency are excellent, and cost reductions and simplified tool management can be achieved.· Internal oil supply type.
                                                              Read more
                                                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                              -76 ~ 167General Steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]-130 ~ 231-N/A-Available
                                                              Regular price (excluding VAT):
                                                              612.11 €
                                                              Standard shipping days:
                                                              8 working days
                                                              Configure now
                                                            • Holder 5 x D HT800WP 4108

                                                                GUHRING

                                                                Holder 5 x D HT800WP 4108

                                                                [Features]· Enables stable machining with the reliable clamping method and highly rigid body.· Unique groove shape and coolant duct position provide excellent chip discharge properties.· Internal oil supply type.
                                                                Read more
                                                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                                --General Steel[◎] / High Hardness Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○]-124 ~ 334-N/A-Available
                                                                Regular price (excluding VAT):
                                                                495.50 €
                                                                Standard shipping days:
                                                                8 working days
                                                                Configure now
                                                              • Holder 5 x D with Oil Hole RT800WP 5243

                                                                  GUHRING

                                                                  Holder 5 x D with Oil Hole RT800WP 5243

                                                                  [Features]· Unique tip clamping method enables tips to be quickly and easily interchanged even within the machine.· Can always machine with a new cutting edge, so productivity and consistency are excellent, and cost reductions and simplified tool management can be achieved.· Internal oil supply type.
                                                                  Read more
                                                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                                  -112 ~ 247General Steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]-166 ~ 311-N/A-Available
                                                                  Regular price (excluding VAT):
                                                                  626.72 €
                                                                  Standard shipping days:
                                                                  8 working days
                                                                  Configure now
                                                                • Holder 7 x D HT800WP 4109

                                                                    GUHRING

                                                                    Holder 7 x D HT800WP 4109

                                                                    [Features]· Enables stable machining with the reliable clamping method and highly rigid body.· Unique groove shape and coolant duct position provide excellent chip discharge properties.· Internal oil supply type.
                                                                    Read more
                                                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                                    --General Steel[◎] / High Hardness Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○]-147 ~ 344-N/A-Available
                                                                    Regular price (excluding VAT):
                                                                    524.73 €
                                                                    Standard shipping days:
                                                                    8 working days
                                                                    Configure now
                                                                  • Holder 7 x D with Oil Hole RT800WP 5248

                                                                      GUHRING

                                                                      Holder 7 x D with Oil Hole RT800WP 5248

                                                                      [Features]· Unique tip clamping method enables tips to be quickly and easily interchanged even within the machine.· Can always machine with a new cutting edge, so productivity and consistency are excellent, and cost reductions and simplified tool management can be achieved.· Internal oil supply type.
                                                                      Read more
                                                                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                                      -148 ~ 327General Steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]-202 ~ 391-N/A-Available
                                                                      Regular price (excluding VAT):
                                                                      678.31 €
                                                                      Standard shipping days:
                                                                      24 working days
                                                                      Configure now
                                                                    • IDI-SG (140° General-Purpose Drill Head)

                                                                        ISCAR

                                                                        IDI-SG (140° General-Purpose Drill Head)

                                                                        [Features] 140° general purpose drill bit.Material: P (steel)Tool material: Carbide.
                                                                        Read more
                                                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                                        6.8 ~ 25.8-General Steel[○] / Quenched and tempered steel[○]Carbide--AvailableOtherN/A
                                                                        Regular price (excluding VAT):
                                                                        94.94 €
                                                                        Standard shipping days:
                                                                        6 working days
                                                                        Configure now
                                                                      • Cam Drill (Replaceable-Head Drill Body) DCM-3D Processing Diameter 7.5 mm–25.9 mm

                                                                          ISCAR

                                                                          Cam Drill (Replaceable-Head Drill Body) DCM-3D Processing Diameter 7.5 mm–25.9 mm

                                                                          Machining Diameter: 7.5 mm to 25.9 mm
                                                                          Read more
                                                                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                                          7.5~7.9 ~ 25.0~25.922 ~ 75General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○]-78.1 ~ 165End Mill ShankN/A-Available
                                                                          Regular price (excluding VAT):
                                                                          286.17 €
                                                                          Standard shipping days:
                                                                          6 working days
                                                                          Configure now
                                                                        • SUMOCHAM (Head Replacement Type Drill Body) DCN-3D, Machining Diameter 6.0 mm–32.9 mm

                                                                            ISCAR

                                                                            SUMOCHAM (Head Replacement Type Drill Body) DCN-3D, Machining Diameter 6.0 mm–32.9 mm

                                                                            Machining Diameter: 6.0 mm to 32.9 mm
                                                                            Read more
                                                                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                                            6.0~6.4 ~ 25.0~25.918 ~ 75General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]-77 ~ 174.5End Mill ShankN/A-N/A
                                                                            Regular price (excluding VAT):
                                                                            295.10 €
                                                                            Standard shipping days:
                                                                            6 working days
                                                                            Configure now
                                                                          • SUMOCHAM Head, Processing Diameter 6.0 mm–32.9 mm ICK/ICM/ICP

                                                                              ISCAR

                                                                              SUMOCHAM Head, Processing Diameter 6.0 mm–32.9 mm ICK/ICM/ICP

                                                                              [Features] ・ Standard type-3 types for P, M and K typesTool material: carbide.
                                                                              Read more
                                                                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                                              6 ~ 25.9-General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide--AvailableOtherN/A
                                                                              Regular price (excluding VAT):
                                                                              100.75 €
                                                                              Standard shipping days:
                                                                              6 working days
                                                                              Configure now
                                                                            • SUMOCHAM Head, Processing Diameter 8.0 mm–25.5 mm

                                                                                ISCAR

                                                                                SUMOCHAM Head, Processing Diameter 8.0 mm–25.5 mm

                                                                                Flat type, for carbon steel/alloy steel (ISO P type).
                                                                                Read more
                                                                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                                                8 ~ 25.5-General Steel[○] / Quenched and tempered steel[○]Carbide--AvailableOtherN/A
                                                                                Regular price (excluding VAT):
                                                                                106.55 €
                                                                                Standard shipping days:
                                                                                6 working days
                                                                                Configure now
                                                                              • For TDJ

                                                                                  TUNGALOY

                                                                                  For TDJ

                                                                                  [Specifications]· Material Details: T313W· Shape: Rectangle 90°
                                                                                  Read more
                                                                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                                                  ---------
                                                                                  Regular price (excluding VAT):
                                                                                  16.64 €
                                                                                  Standard shipping days:
                                                                                  6 working days
                                                                                  Configure now
                                                                                • For TDP

                                                                                    TUNGALOY

                                                                                    For TDP

                                                                                    [Specifications]· Material Details: T313W· Shape: Hexagon 80°
                                                                                    Read more
                                                                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                                                    ---------
                                                                                    Regular price (excluding VAT):
                                                                                    21.18 €
                                                                                    Standard shipping days:
                                                                                    6 working days
                                                                                    Configure now
                                                                                  • For TDR

                                                                                      TUNGALOY

                                                                                      For TDR

                                                                                      [Specifications]· Material Details: T313W
                                                                                      Read more
                                                                                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                                                      ---------
                                                                                      Regular price (excluding VAT):
                                                                                      18.67 €
                                                                                      Standard shipping days:
                                                                                      6 working days
                                                                                      Configure now
                                                                                    • For TDXCF

                                                                                        TUNGALOY

                                                                                        For TDXCF

                                                                                        [Specifications]· Material Details: GH130
                                                                                        Read more
                                                                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                                                        ---------
                                                                                        Regular price (excluding VAT):
                                                                                        28.60 €
                                                                                        Standard shipping days:
                                                                                        6 working days
                                                                                        Configure now
                                                                                      • Insert for TDX

                                                                                          TUNGALOY

                                                                                          Insert for TDX

                                                                                          [Specifications]· The wide variety of chip breakers and choice of materials allow for use with different types of workpiece and machining methods.
                                                                                          Read more
                                                                                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                                                          12.5~14.5 ~ 42.0~54.0--------
                                                                                          Regular price (excluding VAT):
                                                                                          12.29 €
                                                                                          Standard shipping days:
                                                                                          6 working days
                                                                                          Configure now
                                                                                        • For TIDCF

                                                                                            TUNGALOY

                                                                                            For TIDCF

                                                                                            [Specifications]· Material Details: HK20A/JP20A/GH730
                                                                                            Read more
                                                                                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                                                            ---------
                                                                                            Regular price (excluding VAT):
                                                                                            30.42 €
                                                                                            Standard shipping days:
                                                                                            6 working days
                                                                                            Configure now