Screw-Hole-Related Tools（Page 10）
Search by sub-category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Tap Wrenches
Modification/Removal Tools
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Configure now
Starting from∗ ： 69.59 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
INES Inner Diameter Thread Correction Tool
NOGAJAPAN
A tool to repair crushed inner-diameter threads.
[Features]
· Usable with screws of any diameter, pitch, etc. within the applicable range.
· Universal type supporting metric, inch, right, left, fine pitch, and coarse pitch threads.
· HSS blade moves along non-stripped screw grooves to repair the stripped parts.
* The Ines unit has a 60° blade. Purchase a replacement 55° blade separately for repairing pipe threads such as Whitworth threads or PT threads.Configure nowStarting from∗ ： 126.74 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters
CARMEX
For both internal and external threading
[Features]
· Ultrafine particle carbide and new type three-layer PVD coatingConfigure nowStarting from∗ ： 208.52 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MTI Mini Mill Thread, w / o Finishing Teeth, for Both 55° Inner / Outer Diameters
CARMEX
For both internal and external threading
[Features]
· Ultra-fine particle carbide with an advanced three layer PVD blue coatingConfigure nowStarting from∗ ： 208.52 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MTI Mini Mill Thread ISO, for Meter Screws and Inner-Diameter Screws
CARMEX
Metric thread / for I.D. thread
[Features]
· Ultra-fine particle carbide with an advanced three layer PVD blue coatingConfigure nowStarting from∗ ： 212.85 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Hard Cut ISO
CARMEX
Now with further improved cutting performance and beautiful surface finishing.
[Features]
· Lineup starting from the very small diameter of M1.4 x 0.3 is available.
· This new tool meets the needs of the mold industry.
· High-speed cutting enabled.
· Shortens the machining time.
· The blade length is short, so cutting load is not applied.
· Can be used to cut the effective thread up to the edge of blind holes.Configure nowStarting from∗ ： 390.43 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 69.82 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
A Tap Series, Spiral Tap, Long Shank A-LT-SFT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.Configure nowStarting from∗ ： 24.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
A Tap Series Point Tap Long Shank A-LT-POT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.Configure nowStarting from∗ ： 23.65 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hexagonal Shank Tapping Drill
RUKO
[Features]
· Hexagonal shaft shank design enables mounting to cordless screwdriver.
· Enables hole punching and thread cutting work in iron plate, etc., without having to replace the drill.
[Applications]
· For drilling and creating/repairing screw threads.
· Work materials: Iron, aluminum, copper.Configure nowStarting from∗ ： 65.03 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Adjustable Round Die For Tapered Pipe Thread (PT Screw)
TRUSCO NAKAYAMA
[Features]
· Dimensional adjustments can be made with the adjustment screw provided.
· Can also be used to modify screw threads.
[Applications]
· Work materials: low carbon steel.
· For male threading.- Volume Discount
Configure nowStarting from∗ ： 82.65 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Configure now
Starting from∗ ： 36.74 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spiral Tap Claw Tap 300 (for Metal Screws) EX0BMJ Series
SANDVIK
[Features]
· A high-productivity tap tool.
· Long tool life and excellent chip processing provide high stability.
· Oxidized type with excellent welding resistance.
· Taps are available for each work material, making selection easy.
[Applications]
· For blind hole machining.
· Work materials:
Stainless steel or steel.
[Material]
· High-Speed Steel (HSS-E)- Volume Discount
Configure nowStarting from∗ ： 31.33 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Claw Tap 300 TiN Coating (for Metal Screws / Coarse Type)
SANDVIK
[Features]
· A high-productivity tap tool.
· Long tool life and excellent chip processing provide high stability.
· TiN coating with high heat resistance ensures long service life even for work materials that are prone to heat buildup.
· Taps are available for each work material, making selection easy.
[Applications]
· For blind hole machining.
· Work materials: Steel.
[Material]
· High-Speed Steel (HSS-E)- Volume Discount
Configure nowStarting from∗ ： 45.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap CoroTap 200 (For Metric Threads)
SANDVIK
[Features]
· A high-productivity tap tool.
· The long tool life and excellent chip discharging capabilities help ensure high levels of stability.
· There are different taps for different work materials, making selecting a tap simple
[Applications]
· For machining through holes.
· Work material: heat-resistant alloys, steel, stainless steel.- Volume Discount
Configure nowStarting from∗ ： 26.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CoroTap 200 3 × DN Point Tap JIS EP0DM
SANDVIK
[Features]
·Wide selection of power strip for different work materials
·For work materials with long cutting chips- Volume Discount
Configure nowStarting from∗ ： 38.34 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Point Tap CoroTap 200, TiN Coated (For Metric Threads, Fine Type)
SANDVIK
[Features]
· A high-productivity tap tool.
· The long tool life and excellent chip discharging capabilities help ensure high levels of stability.
· The highly heat-resistant TiN coating ensures a long life, even for those work materials which are prone to building up heat.
· There are different taps for different work materials, making selecting a tap simple
[Applications]
· For machining through holes.
· Work material: steel, cast iron, aluminum alloy.Configure nowStarting from∗ ： 76.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Roll Tap Coro Tap 400 TiN Coated (for Blind and Through Holes, Non-Fluted)
SANDVIK
[Features]
· A high-productivity tap tool.
· Long tool life and excellent chip processing provide high stability.
· Rolling tap that does not emit chips.
· Taps are available for each work material, making selection easy.
[Applications]
· For blind hole or through hole machining.
· Work materials: Steel, stainless steel, aluminum alloy, nickel alloy.Configure nowStarting from∗ ： 81.23 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Solid Die D for Metric Threads
YAMAWA MFG
Solid die with improved die runout precision.
[Features]
· High-speed tool steel (HSS) is adopted, realizing stable machining.
· The front surface is the surface with a marking on the chamfering.
· The machining reference surface at the rear is set so that the end face makes close contact when the holder is attached.
· Screw adjustments are not required and die outer diameter precision is improved compared to adjustable dies as this is a solid die.
· Solves problems particular to adjustable type dies, realizing high precision screw machining.
[Applications]
· Convenient for cutting male threads on various work materials, whether hand turned or used with machinery.
· Combining with NC tooling enables machining with a MC.- Volume Discount
Configure nowStarting from∗ ： 52.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Solid Die D for Unified Threads (Fine)
YAMAWA MFG
[Features]
· Solid die with improved die runout precision. · High-speed tool steel (HSS) is adopted, realizing stable machining.
[Applications]
· Work material: Iron, light metals.
· For male thread machining.- Volume Discount
Configure nowStarting from∗ ： 56.94 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Solid Die D for Unified Threads (Coarse)
YAMAWA MFG
[Features]
· Solid die with improved die runout precision. · High-speed tool steel (HSS) is adopted, realizing stable machining.
[Applications]
· Work material: Iron, light metals.
· For male thread machining.- Volume Discount
Configure nowStarting from∗ ： 60.61 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Solid Die (For Left-Handed Threads) D LH for Metric Threads
YAMAWA MFG
Solid die for left-handed threads with improved die runout precision.
[Features]
· High-speed tool steel (HSS) is adopted, realizing stable machining.
· The front surface is the surface with a marking on the chamfering.
· The rear is sunk so that the end face makes close contact when the holder is attached.
· Screw adjustments are not required and die outer diameter precision is improved compared to adjustable dies as this is a solid die.
· Enables hand turned use or use with machinery.
· Solves problems particular to adjustable type dies, realizing high precision male screw machining.
[Applications]
· Ideal for male thread machining with iron or light metals.- Volume Discount
Configure nowStarting from∗ ： 79.16 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 461.87 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Thread Repair Tool Set
NOGAJAPAN
[Features]
· Thread right repair tool set.
· A NES set that includes an outer diameter screw thread repair tool.
[Applications]
· A tool to repair crushed screws.Configure nowStarting from∗ ： 357.37 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
LeaderSert® (Thread Repair Kit)
NOGAJAPAN
[Features]
· Innovative system where no tap is used for repairing female screws.
· When tapping and inserting the threading insert directly into the pilot hole, attach a plastic guide to the tip to insert in a true circle. (PAT.PEND)
[Applications]
· For repairing and reinforcing female threads.Configure nowStarting from∗ ： 102.85 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
RENNSTEIG, Extractor Set (Square), 471-901-3【5 Pieces Per Package】
RENNSTEIG
[Features]
· An extractor that uses high-quality steel.
· Exhibits exceptional durability and high workability.
· 2-flute specification and tip center punching specification ensure firm holding of screws and bolts.
[Applications]
· For the extraction of things like bolts and pipes that had broken inside.Configure nowStarting from∗ ： 120.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 191.91 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 18.97 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Hand Tap (SKS2) EA829DB-24B
ESCO
【Product Specifications】
・Material-SKS_2
・JIS 3 class
・Tap to finish
・Nominal diameter -M24×2.0
・Length-95mm
・■Width-15mmConfigure nowStarting from∗ ： 93.32 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Hand Tap (SKS2) EA829DB-24C
ESCO
Materials: JIS-SKS (TS für Kaltarbeit)_2 / JIS grade 3 / finishing tap / overall Length: 95 mm / width: 15 mmConfigure nowStarting from∗ ： 111.94 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Spiral Tap Set (ISO) EA829DS-1
ESCO
【Product Specifications】
・For blind hole
・Size-M3x0.5・M4x0.7・M5x0.8・M6x1.0・M8x1.25・M10x1.5・M12x1.75(Each 2pcs.)
・Material-HSS
・ISOConfigure nowStarting from∗ ： 252.95 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
![[HSS]Spiral Tap&Drill Set EA829DS-21](//uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007536323_002.jpg?$product_view_b$)
[HSS]Spiral Tap&Drill Set EA829DS-21
ESCO
【Product Specifications】
・Drill Size (Extra Masamune )…Dia 2.5・3.3・4.2・5.0・6.8・8.5・10.3mm(Each 1 Pcs )
・Tap Size …M3×0.5・M4×0.7・M5×0.8・M6×1.0・M8×1.25・M10×1.5・M12×1.75(Each 2 Pcs )
・Material …3-Way Tap ：SKHDrill ：HSS
・3-Way Tap With HandleConfigure nowStarting from∗ ： 276.05 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Spiral Jet Tap Set (ISO) EA829DT-11
ESCO
【Product Specifications】
・Set of 1pc for each size of spiral tap (for blind hole) and jet tap (for through hole).
・Size-M3x0.5・M4x0.7・M5x0.8・M6x1.0・M8x1.25・M10x1.5・M12x1.75
・Material-CO-HSS
・ISOConfigure nowStarting from∗ ： 334.03 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Spiral Jet Tap Set (ISO) EA829DT-6
ESCO
【Product Specifications】
・Set of 1pc for each size of spiral tap (for blind hole) and jet tap (for through hole).
・Size-M3x0.5・M4x0.7・M5x0.8・M6x1.0・M8x1.25・M10x1.5・M12x1.75
・Material-HSS
・ISOConfigure nowStarting from∗ ： 270.97 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Tap Set EA829DV-1
ESCO
【Product Specifications】
・2pcs. each(middle, finishing)
・Size-M3x0.5・M4x0.7・M5x0.8・M6x1.0・M8x1.25・M10x1.5・M12x1.75
・Material-SKS_2
・ISOConfigure nowStarting from∗ ： 139.03 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
![[SKS_2]Tap set EA829DV-21](//uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007536424_002.jpg?$product_view_b$)
[SKS_2]Tap set EA829DV-21
ESCO
【Product Specifications】
・Size …・Coarse Pitch ：M3×0.5・M4×0.7・M5×0.8・M6×1.0・M8×1.25・M10×1.5・M12×1.75・Old JIS ：M3×0.6・M4×0.75・M5×0.9・Fine Pitch ：M6×0.75・M8×1.0・M10×1.25・M12×1.25
・The inside 3-Way Tap Each 1 Pcs Including
・Material …SKS_2Configure nowStarting from∗ ： 142.82 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Circle Dice (38mm Diameter) EA829ML-12
ESCO
【Product Specifications】
・Material …SKS_2
・Dice Dia …38mm
・Nominal …M12×1.0Configure nowStarting from∗ ： 101.76 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Circle Dice (63mm Diameter) EA829MM-30
ESCO
【Product Specifications】
・Material …SKS_2
・Dice Dia …63mm
・Nominal …M30×1.5Configure nowStarting from∗ ： 303.65 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Circle Dice (For Left Thread・38mm Diameter) EA829MW-112
ESCO
【Product Specifications】
・Material …SKS_2
・Dice Dia …38mm
・Nominal …M12×1.5Configure nowStarting from∗ ： 117.82 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Circle Dice (For Left Thread・38mm Diameter) EA829MW-116B
ESCO
【Product Specifications】
・Material …SKS_2
・Dice Dia …38mm
・Nominal …M16×2.0Configure nowStarting from∗ ： 117.77 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Circle Dice (For Left Thread・50mm Diameter) EA829MW-220B
ESCO
【Product Specifications】
・Material …SKS_2
・Dice Dia …50mm
・Nominal …M20×2.5Configure nowStarting from∗ ： 137.78 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Circle Dice (For Left Thread・50mm Diameter) EA829MW-224B
ESCO
【Product Specifications】
・Material …SKS_2
・Dice Dia …50mm
・Nominal …M24×3.0Configure nowStarting from∗ ： 137.67 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Circle Dice (For Left Thread・25mm Diameter) EA829MW-6
ESCO
【Product Specifications】
・Material …SKS_2
・Dice Dia …25mm
・Nominal …M6×1.0Configure nowStarting from∗ ： 77.02 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
![[HSSE] Spiral Tap EA829S-14](//uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007548304_001.jpg?$product_view_b$)
[HSSE] Spiral Tap EA829S-14
ESCO
【Product Specifications】
・Material-High vanadium high-speed steel (HSSE)
・Nominal…M14 x 2
・Length…88mmConfigure nowStarting from∗ ： 56.05 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
![[HSSE] Spiral Tap EA829S-30C](//uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007548775_001.jpg?$product_view_b$)
[HSSE] Spiral Tap EA829S-30C
ESCO
【Product Specifications】
・Material-High vanadium high-speed steel (HSSE)
・Nominal…M30 x 2
・Length…135mmConfigure nowStarting from∗ ： 341.49 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
![[HSS]Spiral Tap&Drill Set EA829DS-21](http://uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007536323_002.jpg?$product_view_b$)
![[SKS_2]Tap set EA829DV-21](http://uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007536424_002.jpg?$product_view_b$)
![[HSSE] Spiral Tap EA829S-14](http://uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007548304_001.jpg?$product_view_b$)
![[HSSE] Spiral Tap EA829S-30C](http://uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007548775_001.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | NOGAJAPAN | CARMEX | CARMEX | CARMEX | CARMEX | OSG | OSG | OSG | RUKO | TRUSCO NAKAYAMA | YAMAWA MFG | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | TRUSCO NAKAYAMA | NOGAJAPAN | NOGAJAPAN | RENNSTEIG | TRUSCO NAKAYAMA | ENGINEER | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO |
| Product Series | MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters | MTI Mini Mill Thread, w / o Finishing Teeth, for Both 55° Inner / Outer Diameters | MTI Mini Mill Thread ISO, for Meter Screws and Inner-Diameter Screws | Screw Cutting Round Die Series, General Round Dies for Screw Cutting, RD-H | Spiral Tap Claw Tap 300 TiN Coating (for Metal Screws / Coarse Type) | Point Tap CoroTap 200, TiN Coated (For Metric Threads, Fine Type) | Roll Tap Coro Tap 400 TiN Coated (for Blind and Through Holes, Non-Fluted) | Hexagonal Re-Threading Die Set (Metric Coarse Screw)【10 Pieces Per Package】 | RENNSTEIG, Extractor Set (Square), 471-901-3【5 Pieces Per Package】 | ||||||||||||||||||||||||||||||||||||
| Starting from∗ | 69.59 € *Unit price with basic configuration Volume Discount | 126.74 € *Unit price with basic configuration | 208.52 € *Unit price with basic configuration | 208.52 € *Unit price with basic configuration | 212.85 € *Unit price with basic configuration | 390.43 € *Unit price with basic configuration | 69.82 € *Unit price with basic configuration Volume Discount | 24.50 € *Unit price with basic configuration | 23.65 € *Unit price with basic configuration | 65.03 € *Unit price with basic configuration | 82.65 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 36.74 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 31.33 € *Unit price with basic configuration Volume Discount | 45.42 € *Unit price with basic configuration Volume Discount | 26.00 € *Unit price with basic configuration Volume Discount | 38.34 € *Unit price with basic configuration Volume Discount | 76.42 € *Unit price with basic configuration | 81.23 € *Unit price with basic configuration | 52.80 € *Unit price with basic configuration Volume Discount | 56.94 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 60.61 € *Unit price with basic configuration | 79.16 € *Unit price with basic configuration Volume Discount | 461.87 € *Unit price with basic configuration | 357.37 € *Unit price with basic configuration | 102.85 € *Unit price with basic configuration | 120.10 € *Unit price with basic configuration | 191.91 € *Unit price with basic configuration | 18.97 € *Unit price with basic configuration | 93.32 € *Unit price with basic configuration | 111.94 € *Unit price with basic configuration | 252.95 € *Unit price with basic configuration | 276.05 € *Unit price with basic configuration | 334.03 € *Unit price with basic configuration | 270.97 € *Unit price with basic configuration | 139.03 € *Unit price with basic configuration | 142.82 € *Unit price with basic configuration | 101.76 € *Unit price with basic configuration | 303.65 € *Unit price with basic configuration | 117.82 € *Unit price with basic configuration | 117.77 € *Unit price with basic configuration | 137.78 € *Unit price with basic configuration | 137.67 € *Unit price with basic configuration | 77.02 € *Unit price with basic configuration | 56.05 € *Unit price with basic configuration | 341.49 € *Unit price with basic configuration |
| Min. Shipping Days | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | Same day | 6 Days | 6 Days | 6 Days | 5 Days | 6 Days | 12 Days | 6 Days | Same day | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 5 Days | 9 Days | 9 Days | 8 Days | 9 Days | 9 Days | 9 Days | 8 Days | 9 Days | 9 Days | 9 Days | 9 Days | 9 Days | 9 Days | 9 Days | 9 Days | 7 Days | 9 Days |
| Screw Types | Taper for Pipe | - | Meter | Meter | Meter | Meter | Meter / Whitworth | Meter | Meter | Meter | Taper for Pipe | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Unified | Unified | Meter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Screw size (Nominal) | R1 ～ R3/8 | - | - | - | M1 ～ M3 | - | W1 ～ M25 | M2 ～ M24 | M2 ～ M24 | M6 | 1/2 ～ 3/4 | M6 ～ M14 | M5 ～ M10 | M4 ～ M10 | M5 ～ M8 | M3 ～ M24 | M8 ～ M12 | M8 ～ M12 | M1 ～ M50 | No.10 | No.6 | M1 ～ M48 | - | - | - | - | - | M1.4 ～ M6.0 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Pitch (P), Number of Threading(mm) | 11 ～ 28 | - | - | - | 0.25 ～ 0.5 | 2 | 0.35 ～ 40 | 0.25 ～ 3 | 0.25 ～ 3 | 1 | - | 1 ～ 1.5 | 0.8 ～ 1.5 | 0.7 ～ 1.5 | 0.8 ～ 1.25 | 0.5 ～ 3 | 1 | 1.25 ～ 1.75 | 0.2 ～ 5 | 32 | 32 | 0.5 ～ 5 | - | - | - | - | - | 0.3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Chamfer threads (Lcf) | - | - | - | - | - | - | - | 2.5P | 5P | - | - | 2 ～ 4 | 2P | 2.5P | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tool Material Type | Alloy HSS | - | Carbide | Carbide | Carbide | Carbide | High-speed steel | Powder high-speed steel | Powder high-speed steel | High-speed steel | Alloy HSS | - | - | - | - | - | - | - | High-speed steel | High-speed steel | High-speed steel | High-speed steel | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| work material | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Tool Steel (Before SKD Hardening)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tap Type | Die | Modification/removal Tool | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Die | Spiral Tap | Point tap | Hand Tap | Die | Roll tap | Spiral Tap | Spiral Tap | Point tap | Point tap | Point tap | Roll tap | Die | Die | Die | Die | Die | Modification/removal Tool | Modification/removal Tool | Modification/removal Tool | Tap wrench | Hand Tap | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Hole type | - | - | For blind hole | For blind hole | For blind hole | For blind hole | - | For blind hole | For through hole | For through hole / For blind hole | - | For through hole | For blind hole | For blind hole | - | - | - | - | - | - | - | - | - | For blind hole | For blind hole | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Coating Y/N | N/A | - | Available | Available | Available | Available | N/A | Available | Available | N/A | - | Available | Available | Available | N/A | Available | Available | - | N/A | N/A | N/A | N/A | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Coating Type | Non-Coated | - | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Non-Coated | Other | Other | Non-Coated | - | - | Other | TiN | - | TiCN | TiN | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Overall Length (L)(mm) | - | 109 ～ 163 | 39 ～ 58 | 39 ～ 64 | 39 | 84 | - | 80 ～ 200 | 80 ～ 200 | 60 | - | 62 ～ 88 | 60 ～ 75 | 52 ～ 75 | 60 ～ 70 | 46 ～ 120 | 70 | 70 ～ 82 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
![[HSS]Spiral Tap&Drill Set EA829DS-21](http://uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007536323_002.jpg?$product_view_c$)
![[SKS_2]Tap set EA829DV-21](http://uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007536424_002.jpg?$product_view_c$)
![[HSSE] Spiral Tap EA829S-14](http://uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007548304_001.jpg?$product_view_c$)
![[HSSE] Spiral Tap EA829S-30C](http://uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007548775_001.jpg?$product_view_c$)
Loading...
Filter by:
Stock
-
- Show only stock items
-
Screw Types
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No0UN
- NO.0-80UNF
- No.0-80UNF
- No.10
- S0.1
- NO.1-72UNF
- No.1-72UNF
- NO.1-64UNC
- No.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12-32UNEF
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- No.4
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- No.6
- S0.6
- NO.6-40UNF
- No.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1"
- 1UN
- 1UNS
- G1
- G 1"
- M1
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PF 1
- PT 1
- R1
- Rp1
- S1
- UNC 1
- UNC 1"
- UNF 1"
- W1
- 1´-20UNEF
- 1´-14UNS
- 1'-12UNF
- 1´-12UNF
- 1´-11
- 1′-11
- 1-8UNC
- 1'-8UNC
- 1´-8UNC
- G1"-3"
- 1"1/2UN
- 1"1/2
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1´1/2-11
- 1′1/2-11
- 1 1/2-8UN
- 1"1/4UN
- 1"1/4
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1´1/4-11
- 1′1/4-11
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1´ 1/8-7UNC
- 1"1/16UN
- 1/2
- 1/2UN
- G1/2
- G 1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF 1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC 1/2
- UNF 1/2
- UNJF 1/2
- W1/2
- 1/2-28UNEF
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- G1/2 5/8
- 1/2W12
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1′3/4-11
- 1 3/4-8UN
- 1 3/8
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- G1/4
- G 1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PS 1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC 1/4
- UNF 1/4
- UNJF 1/4
- W1/4
- 1/4-32UNEF
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4W20
- W1"5/8
- 1 5/8-8UN
- W1"7/8
- 1 7/8-8UN
- 1'W8
- 1/8
- G1/8
- G 1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8SM40
- 1/8SM44
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- 1/16-28
- 1/16SM80
- M1.1
- G 1.1/2
- G 1.1/4
- G 1.1/8
- M1.2
- S1.2
- M1.4
- S1.4
- M1.6
- M1.7
- M1.8
- 2"
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- R2
- Rp2
- UNC 2
- UNF 2
- W2
- 2´-11
- 2′-11
- 2-8UN
- G2"1/2
- R2"1/2
- Rp2"1/2
- 2′1/2-11
- W2"1/4
- M2.2
- M2.3
- M2.5
- M2.6
- 3M
- EGM 3
- G3
- M3
- M3.0
- No3UN
- R3
- Rp3
- STI M3
- UNC 3
- UNF 3
- 3′-11
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3/4
- 3/4UN
- G3/4
- G 3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF 3/4
- R3/4
- Rp3/4
- UNC 3/4
- UNF 3/4
- W3/4
- 3/4-20UNEF
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8UN
- G3/8
- G 3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC 3/8
- UNF 3/8
- UNJF 3/8
- W3/8
- 3/8-32UNEF
- 3/8-24UNF
- 3/8-19
- 3/8-16UNC
- 3/8W16
- M3 - M10
- M3～10
- M3 - M12
- SM3/16
- W3/16
- 3/16SM24
- 3/16W24
- 3/16SM28
- 3/16SM32
- 3/16SM40
- M3 - M18
- SM3/32
- 3/32SM56
- 3/32SM100
- 3.5
- M3.5
- 4
- 4M
- EGM 4
- G4
- M4
- M4.0
- MF4
- No4UN
- R4
- Rp4
- STI M4
- UNC 4
- UNF 4
- №4-40UNC
- M4～6
- M4.5
- 5M
- EGM 5
- M5
- M5.0
- MF5
- No5UN
- STI M5
- UNC 5
- №5-40UNC
- 5/8
- 5/8UN
- G5/8
- G 5/8
- NPS5/8
- R5/8
- UNC 5/8
- UNF 5/8
- W5/8
- 5/8-24UNEF
- 5/8-18UNF
- 5/8-11UNC
- G5/8 3/4
- 5/8W11
- M5 - M12
- M5～13
- 5/16
- 5/16UN
- UNC 5/16
- UNF 5/16
- UNJF 5/16
- W5/16
- 5/16-32UNEF
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- 5/64SM64
- 5.5M
- M5.5
- 6
- EGM 6
- M6
- M6.0
- MF6
- No6UN
- STI M6
- UNC 6
- UNF 6
- UNJC 6
- No6-40UNF
- №6-32UNC
- M7
- MF7
- PG7
- 7 execution M3 - M12
- 7/8
- 7/8UN
- G7/8
- G 7/8
- NPS7/8
- R7/8
- UNC 7/8
- UNF 7/8
- W7/8
- 7/8-20UNEF
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- UNC 7/16
- UNF 7/16
- UNJF 7/16
- W7/16
- 7/16-28UNEF
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- SM7/32
- 7.5
- M7.5
- EGM 8
- M8
- MF8
- No8UN
- STI M8
- Tr8
- UNC 8
- UNF 8
- UNJC 8
- №8-32UNC
- 9
- M9
- PG9
- 9/16
- 9/16UN
- UNC 9/16
- UNF 9/16
- 9/16-18UNF
- 9/16-12UNC
- 9/16W12
- SM9/32
- SM9/64
- 9/64SM40
- M9.5
- EGM 10
- M10
- MF10
- No10UN
- STI M10
- Tr10
- Tr 10
- UNC10
- UNC 10
- UNF 10
- UNJF 10
- №10-32UNF
- №10-24UNC
- M10～25
- M11
- PG11
- SM11/32
- SM11/64
- 11/64SM40
- EGM 12
- M12
- MF12
- Mf12
- No12UN
- STI M12
- Tr12
- Tr 12
- UNC 12
- UNF 12
- M12 x 1.5
- M13
- PG13.5
- M14
- MF14
- Tr 14
- M15
- SM15/64
- 15/64SM28
- M16
- MF16
- Mf16
- PG16
- Tr16
- Tr 16
- M16 x 1.5
- M17
- M18
- MF18
- Tr18
- Tr 18
- M19
- M20
- MF20
- Mf20
- Tr 20
- M20 x 1.5
- M21
- PG21
- M22
- M22X
- MF22
- Tr 22
- M23
- M24
- M24X
- MF24
- Tr 24
- M25
- M25X
- MF25
- Mf25
- Tr 25
- M25 x 1.5
- M26
- MF26
- Tr 26
- M27
- MF27
- M28
- MF28
- Tr 28
- PG29
- M30
- MF30
- Tr 30
- M32
- Mf32
- M33
- M34
- M35
- M36
- PG36
- M37
- M38
- M39
- M40
- M42
- PG42
- M44
- M45
- M46
- M48
- M50
- M52
- M56
- M64
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Number of Threading(mm)
-
Chamfer threads (Lcf)
-
Tool Material Type
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Brand
-
- OSG (377)
- YAMAWA MFG (98)
- CARMEX (35)
- ESCO (25)
- SKC (25)
- TRUSCO NAKAYAMA (24)
- REX TOOLS (20)
- NACHI(FUJIKOSHI) (15)
- ISHIHASHI (13)
- SANDVIK (13)
- GEDORE (7)
- WERA (5)
- HAZET (4)
- NOGAJAPAN (4)
- TANOI MFG (4)
- GUHRING (3)
- RENNSTEIG (3)
- BAHCO (2)
- EIKOSHA (2)
- H & H (2)
- NS TOOL (2)
- RUKO (2)
- WIHA (2)
- FEIN (2)
- BERNSTEIN AG (1)
- ENGINEER (1)
- KANETEC (1)
- LIGHTSEIKI (1)
- MITSUTOMO (1)
- NEW STRONG (1)
- STAHLWILLE (1)
- WALTER PROTOTYP (1)
CAD data type
-
- 2D
- 3D
Categories related to Screw-Hole-Related Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.