EN / UK

Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Screw-Hole-Related Tools（Page 9）

Search by sub-category

713

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

Point Tap for Difficult-to-Cut Materials EH-PO

YAMAWA MFG

Suitable for tapping high-hardness steels of 35 to 45 HRC such as high carbon steel, alloy steel forgings, tempering material, mold material, etc.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.05 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

For Tapered Screw for Pipe for Viscous Material (Long Screw Type Interflap: Left Twisted Spiral) INT-PT

YAMAWA MFG

[Features]
· Tap that reduces cutting torque by removing 1 thread per land with loose leftward twist.
· It is a tap particularly suitable for thread processing of viscous materials such as stainless steel and chrome molybdenum steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	120.56 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Non-Ferrous Metal Roll Tap N+RS / N-RS

YAMAWA MFG

A roll tap suitable for threading non-ferrous materials (aluminum casting, aluminum die casting, brass etc.).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.00 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Carbide Solid Mill Thread Metric Screw (ISO)

CARMEX

Enables internal threading to be performed in a single pass.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	229.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread G (55°)

CARMEX

Threading can be performed for both internal and external threads with a single pass.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	229.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread Unified Screw (UN)

CARMEX

For internal threading.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	229.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread BSPT

CARMEX

For both internal and external threading.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	229.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread NPT

CARMEX

For both inner/outer diameter threads.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	229.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread NPTF

CARMEX

Select to compare

Configure now
Starting from^∗ ：	229.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread with Oil Hole ISO

CARMEX

Metric thread / for I.D.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	229.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Mill Thread G (55°) Solid Carbide with Oil Hole

CARMEX

Whitworth screw, I.D./O.D. common type.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	273.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread with Oil Hole BSPT

CARMEX

BSPT thread, I.D./O.D. common type.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	273.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread with Oil Hole UN

CARMEX

For unified screws and inner diameter screws.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	273.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread with Oil Hole NPT

CARMEX

NPT thread, I.D./O.D. common type.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	273.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread with Oil Hole NPS

CARMEX

Internal and external use inch shank.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	273.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread with Oil Hole NPSF

CARMEX

Inch shank for both inner and outer diameters.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	273.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

MTZ Jet Mill Thread with Oil Hole ISO

CARMEX

For metric I.D. thread.

[Features]
· New type of carbide solid mill thread with oil holes inside the spiral groove.
· Efficiently conveys cooling fluid to the cutting edge for smoother machining.
· Especially effective with through holes.
· Effective for cutting powder removal.
· Also suitable for machinery that does not include an external lubricating device.

Select to compare

Configure now
Starting from^∗ ：	263.46 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

MTZ Jet Mill Thread with Oil Hole BSPT

CARMEX

For both internal and external threading.

[Features]
· New type of carbide solid mill thread with oil holes inside the spiral groove.
· Efficiently conveys cooling fluid to the cutting edge for smoother machining.
· Especially effective with through holes.
· Effective for cutting powder removal.
· Also suitable for machinery that does not include an external lubricating device.

Select to compare

Configure now
Starting from^∗ ：	305.88 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

MTZ Jet Mill Thread with Oil Hole BSW

CARMEX

Select to compare

Configure now
Starting from^∗ ：	263.46 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Neck Narrowed Q-Type, with Oil Hole for Inner Diameter Meter Threads

CARMEX

For internally threaded metric screws.

[Features]
· For thread cutting deep, large diameter holes.
· With neck thinly processed and an oil hole, it is suitable for screw-cutting deep holes of medium to thick diameters.
· Stable processing without causing chatter is possible.
· Deep hole drilling can be performed with one pass.
· Blade length is shorter, so cutting resistance decreases.
· Able to thread long blade lengths of up to 3D

Select to compare

Configure now
Starting from^∗ ：	349.53 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

For Large Diameter Unified Screw Type Q for UN Inner Diameter Unified Screw

CARMEX

For internally threaded unified screws.

[Features]
· For thread cutting deep, large diameter holes.
· With neck thinly processed and an oil hole, it is suitable for screw-cutting deep holes of medium to thick diameters.
· Stable processing without causing chatter is possible.
· Deep hole drilling can be performed with one pass.
· Blade length is shorter, so cutting resistance decreases.
· Able to thread long blade lengths of up to 3D

Select to compare

Configure now
Starting from^∗ ：	349.53 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid for Outer Diameter, Mill Thread ISO

CARMEX

Metric thread / for O.D. thread.

[Features]
· The spiral blade enables a clean finish.
· Machining time is reduced by using three to six flutes

Select to compare

Configure now
Starting from^∗ ：	342.45 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid for Outer Diameter, Mill Thread UN

CARMEX

For unified screws and outer diameter screws.

[Features]
· The spiral blade enables a clean finish.
· Machining time is reduced by using three to six flutes

Select to compare

Configure now
Starting from^∗ ：	349.53 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Tapered End Mill

CARMEX

[Features]
· Carbide solid tapered end mills are used for pre-process machining when thread milling the screws of tapered shapes such as pipe screws.
· Increases the service life of solid carbide type mill threads or mill thread tips.
· Equal and proper load will be applied to the cutting edge of the mill thread cutter.
· By applying taper shape pre-processing, the machining time of the mill thread is shortened

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	119.87 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Mini Mill Thread G55°

CARMEX

For both G (55°) inner and outer diameter thread (MT7).

[Features]
· Mini mill thread is a carbide solid mill thread developed for threading the inside diameter of very small holes.
· Achieves phenomenal performance due to its highly precise blade shape and multiple-layer titanium aluminum nitride coated high performance ultrafine particle carbide (MT7).
· Small diameter threading from M1 x 0.25 (pilot hole diameter φ0.75 mm) is possible.
· Because high-speed cutting can be performed, machining time is shortened.
· The blade length is short (3 ridges), so cutting load is not applied.
· Can be used to cut the effective thread up to the edge of blind holes.
· Enables thread cutting of difficult-to-cut and high hardness materials.

Select to compare

Configure now
Starting from^∗ ：	211.31 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Jet Mini Mill Thread for Aircraft UNJ

CARMEX

It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide and since it has lubrication hole in spiral groove, it is also suitable for machines that do not have external lubrication device.

Select to compare

Configure now
Starting from^∗ ：	213.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Jet Mini Mill Thread for Aircraft MJ

CARMEX

Select to compare

Configure now
Starting from^∗ ：	217.83 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Mill Thread, No Finishing Flute 60°

CARMEX

It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide, and is effective for threading deep holes for both internal and outer diameter threads.

Select to compare

Configure now
Starting from^∗ ：	208.53 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

DMT 3in1 ISO Internal Diameter Metric Thread 60° with Internal Lubrication Hole

CARMEX

With internal coolant hole, up to screw depth D1 x 2.

[Features]
· 3 functions with one tool. (drilling + threading + chamfering).
· Thanks to the circular arc helical machining, thread cutting, chamfering and drilling are completed in one step.
· Drilling tools are not required.
· High-performance tools shorten the cycle time and reduce the machining costs.
· Can be used for both blind holes and through holes.
· Because one tool can be used for drilling, threading, and chamfering, less time is spent replacing tools.
· Thread processing with finished blade can be performed.
· Both right-handed and left-handed threads can be processed with the same tool.

Select to compare

Configure now
Starting from^∗ ：	298.23 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

DMT 3in1 UN Internal Diameter Unified Thread 60° with Internal Lubrication Hole

CARMEX

Select to compare

Configure now
Starting from^∗ ：	304.42 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Hard Cut ISO

CARMEX

[Features]
· This new tool meets the needs of the mold industry.
· High-speed cutting enabled.
· Shortens the machining time.
· The blade length is short, so cutting load is not applied.
· Can be used to cut the effective thread up to the edge of blind holes.

Select to compare

Configure now
Starting from^∗ ：	244.68 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Hard Cut UN

CARMEX

Select to compare

Configure now
Starting from^∗ ：	218.26 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Slim Head Type Hard Cut MTH ISO

CARMEX

[Features]
· For mini mill thread type hard cuts, we have developed an innovative tool capable of threading high hardness materials up to HRC 62 in one pass.
· Shortens machining time because the same tool can be used for thread cutting and chamfering.
· Compatible with relatively large diameters.
· The unique coating technology demonstrates excellent resistance to abrasion and heat.
· Excellent carbide grade which also handles hardened steel.
· Cutting chips are reduced, providing machining stability.
· The cycle time is short, increasing productivity.
· Supports screw depths up to twice the machining thread diameter.

Select to compare

Configure now
Starting from^∗ ：	266.94 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Spiral Tap Series, General Purpose Whitworth Screw, EX-SFT-W

OSG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	9.74 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Spiral Tap Series, General Purpose (Left Hand Thread), EX-SFT-L

OSG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	12.94 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap Series, Ultra-Synchronized Tap, US-AL-SFT

OSG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.10 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, General Homo Treatment Long Shank, EX-LT-H-POT

OSG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.02 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series X Performer Long Shank LT-S-XPF

OSG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	25.83 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Taper Tap Series for Pipes Interrupted Thread (PT) EX-IRT-PT

OSG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	26.27 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Taper Tap Series for Pipes TIN Coating Interrupted Thread Short Screws Long Shank TIN-LT-S-IRT

OSG

Select to compare

Configure now
Starting from^∗ ：	64.89 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Taper Tap Series for Pipes TIN Coated Short Screws Long Shank TIN-LT-S-TPT

OSG

Select to compare

Configure now
Starting from^∗ ：	53.57 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Taper Tap Series for Pipes TIN Coated Long Shank TIN-LT-TPT

OSG

Select to compare

Configure now
Starting from^∗ ：	47.40 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Screw Cutting Round Die Series, Tapered Screw Cutting Round Solid Dies, TPD-S-NPT

OSG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	69.25 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Screw Cutting Round Die Series, Tapered Screw Cutting Round Solid Dies, TPD-S-NPT

OSG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	94.79 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Screw Cutting Round Die Series, Tapered Screw Cutting Round Solid Type, TPD-S-NPTF

OSG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	90.46 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	Point Tap for Difficult-to-Cut Materials EH-PO	For Tapered Screw for Pipe for Viscous Material (Long Screw Type Interflap: Left Twisted Spiral) INT-PT	Non-Ferrous Metal Roll Tap N+RS / N-RS	Carbide Solid Mill Thread Metric Screw (ISO)	Carbide Solid Mill Thread G (55°)	Carbide Solid Mill Thread Unified Screw (UN)	Carbide Solid Mill Thread BSPT	Carbide Solid Mill Thread NPT	Carbide Solid Mill Thread NPTF	Carbide Solid Mill Thread with Oil Hole ISO	Mill Thread G (55°) Solid Carbide with Oil Hole	Carbide Solid Mill Thread with Oil Hole BSPT	Carbide Solid Mill Thread with Oil Hole UN	Carbide Solid Mill Thread with Oil Hole NPT	Carbide Solid Mill Thread with Oil Hole NPS	Carbide Solid Mill Thread with Oil Hole NPSF	MTZ Jet Mill Thread with Oil Hole ISO	MTZ Jet Mill Thread with Oil Hole BSPT	MTZ Jet Mill Thread with Oil Hole BSW	Neck Narrowed Q-Type, with Oil Hole for Inner Diameter Meter Threads	For Large Diameter Unified Screw Type Q for UN Inner Diameter Unified Screw	Carbide Solid for Outer Diameter, Mill Thread ISO	Carbide Solid for Outer Diameter, Mill Thread UN	Carbide Solid Tapered End Mill	Mini Mill Thread G55°	Jet Mini Mill Thread for Aircraft UNJ	Jet Mini Mill Thread for Aircraft MJ	Carbide Solid Mill Thread, No Finishing Flute 60°	DMT 3in1 ISO Internal Diameter Metric Thread 60° with Internal Lubrication Hole	DMT 3in1 UN Internal Diameter Unified Thread 60° with Internal Lubrication Hole	Hard Cut ISO	Hard Cut UN	Slim Head Type Hard Cut MTH ISO	Spiral Tap Series, General Purpose Whitworth Screw, EX-SFT-W	Spiral Tap Series, General Purpose (Left Hand Thread), EX-SFT-L	Spiral Tap Series, Ultra-Synchronized Tap, US-AL-SFT	Point Tap Series, General Homo Treatment Long Shank, EX-LT-H-POT	Groove-Free Tap Series X Performer Long Shank LT-S-XPF	Taper Tap Series for Pipes Interrupted Thread (PT) EX-IRT-PT	Taper Tap Series for Pipes TIN Coating Interrupted Thread Short Screws Long Shank TIN-LT-S-IRT	Taper Tap Series for Pipes TIN Coated Short Screws Long Shank TIN-LT-S-TPT	Taper Tap Series for Pipes TIN Coated Long Shank TIN-LT-TPT	Screw Cutting Round Die Series, Tapered Screw Cutting Round Solid Dies, TPD-S-NPT	Screw Cutting Round Die Series, Tapered Screw Cutting Round Solid Dies, TPD-S-NPT	Screw Cutting Round Die Series, Tapered Screw Cutting Round Solid Type, TPD-S-NPTF
Starting from^∗	14.05 € *Unit price with basic configuration Volume Discount	120.56 € *Unit price with basic configuration	24.00 € Special price *Unit price with basic configuration Promotional pricing	229.39 € *Unit price with basic configuration	229.39 € *Unit price with basic configuration	229.39 € *Unit price with basic configuration	229.39 € *Unit price with basic configuration	229.39 € *Unit price with basic configuration	229.39 € *Unit price with basic configuration	229.39 € *Unit price with basic configuration	273.20 € *Unit price with basic configuration	273.20 € *Unit price with basic configuration	273.20 € *Unit price with basic configuration	273.20 € *Unit price with basic configuration	273.20 € *Unit price with basic configuration	273.20 € *Unit price with basic configuration	263.46 € *Unit price with basic configuration	305.88 € *Unit price with basic configuration	263.46 € *Unit price with basic configuration	349.53 € *Unit price with basic configuration	349.53 € *Unit price with basic configuration	342.45 € *Unit price with basic configuration	349.53 € *Unit price with basic configuration	119.87 € *Unit price with basic configuration Volume Discount	211.31 € *Unit price with basic configuration	213.39 € *Unit price with basic configuration	217.83 € *Unit price with basic configuration	208.53 € *Unit price with basic configuration	298.23 € *Unit price with basic configuration	304.42 € *Unit price with basic configuration	244.68 € *Unit price with basic configuration	218.26 € *Unit price with basic configuration	266.94 € *Unit price with basic configuration	9.74 € *Unit price with basic configuration Volume Discount	12.94 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	24.10 € *Unit price with basic configuration Volume Discount	14.02 € *Unit price with basic configuration Volume Discount	25.83 € *Unit price with basic configuration Volume Discount	26.27 € *Unit price with basic configuration Volume Discount	64.89 € *Unit price with basic configuration	53.57 € *Unit price with basic configuration	47.40 € *Unit price with basic configuration	69.25 € *Unit price with basic configuration Volume Discount	94.79 € *Unit price with basic configuration Volume Discount	90.46 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	8 Days	6 Days	Same day	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days
Screw Types	Meter	Taper for Pipe	Meter	Meter	Parallel for Pipes	Unified	Parallel for Pipes	Parallel for Pipes	Parallel for Pipes	Meter	Parallel for Pipes	Parallel for Pipes	Unified	Parallel for Pipes	Parallel for Pipes	Parallel for Pipes	Meter	Parallel for Pipes	Whitworth	Meter	Unified	Meter	Unified	Taper for Pipe	Whitworth	Other	Other	Meter	Meter	Unified	Meter	Unified	Meter	Whitworth	Meter	Meter	Meter	Meter	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe
Screw size (Nominal)	M3 ～ M24	1/2-14	M10	M3 ～ M27	-	-	-	-	-	M4 ～ M24	-	-	-	-	-	-	M6 ～ M20	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	M3 ～ M12	W1/8	M3 ～ M30	M3 ～ M24	M3 ～ M20	M3 ～ M12	R1 ～ R7/8	Rc1/2 ～ Rc3/8	Rc1/2 ～ Rc3/8	Rc1/2 ～ Rc3/8	R1 ～ R7/8	NPT1 ～ NPT3/8	NPTF1 ～ NPTF3/8
Pitch (P), Number of Threading(mm)	0.5 ～ 3	-	1.5	0.5 ～ 3	11 ～ 28	-	-	-	-	0.5 ～ 3	-	-	-	-	-	-	1 ～ 2.5	-	-	1 ～ 4	-	1 ～ 2	-	-	-	-	-	-	1 ～ 2	-	0.4	-	0.5 ～ 1.75	40	0.5 ～ 3.5	0.5 ～ 3	0.5 ～ 2.5	0.5 ～ 1.75	11 ～ 28	14 ～ 28	14 ～ 28	14 ～ 28	11 ～ 28	11.5 ～ 27	11.5 ～ 27
Chamfer threads (Lcf)	4.5P	3P	4P	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	2.5P	2.5P	3P	5P	-	2.5P	2.5P	2.5P	2.5P	-	-	-
Tool Material Type	Cobalt HSS	High-speed steel	High-speed steel	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	JIS-SKS	Alloy HSS	Alloy HSS
work material	High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Copper (Cu)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○]	Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Quenched and tempered steel (45 to 55 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Quenched and tempered steel (45 to 55 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Tool Steel (Before SKD Hardening)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Tool Steel (Before SKD Hardening)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	-	-	-
Tap Type	Point tap	Tap for pipes	Roll tap	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Spiral Tap	Spiral Tap	Spiral Tap	Point tap	Roll tap	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Die	Die	Die
Hole type	For through hole	For through hole	For through hole / For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	-	-	-	For blind hole	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	-	-	-
Coating Y/N	N/A	N/A	N/A	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	N/A	N/A	Available / N/A	N/A	Available	N/A	Available	Available	Available	N/A	N/A	N/A
Coating Type	-	-	-	TiAlN	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Non-Coated	Non-Coated	Non-Coated / Other	Non-Coated	Other	Non-Coated	TiN	TiN	TiN	Non-Coated	Non-Coated	Non-Coated
Overall Length (L)(mm)	46 ～ 120	80	75	58 ～ 120	58 ～ 105	58 ～ 105	58 ～ 105	58 ～ 105	58 ～ 105	58 ～ 120	64 ～ 105	64 ～ 105	64 ～ 105	64 ～ 73	63 ～ 76	63 ～ 76	58 ～ 101	64 ～ 101	58 ～ 73	73 ～ 160	73 ～ 105	73 ～ 84	73 ～ 84	58 ～ 84	64 ～ 105	58 ～ 73	58 ～ 64	58 ～ 101	64 ～ 84	64	39	39 ～ 84	58 ～ 84	46	46 ～ 135	46 ～ 120	100 ～ 150	80 ～ 150	55 ～ 95	120 ～ 150	100 ～ 150	100 ～ 150	-	-	-