Drill Bits for Electric Drilling Machines

?* Information on days to ship

• 

  Mist Diamond Optional Parts

  MIYANAGA

  [Features]
  Hands-free water supply sets, cutting powder extruded rods, etc. are available.

  • Volume Discount

  Starting from∗ ：	4.83 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Deltagon Bit for Vibration

  MIYANAGA

  [Features]
  · Drilling nearly perfect circles is possible.
  · Improved positioning performance.
  · 3-flute type that greatly improves workability and is affordable.
  · Incredible durability.
  · Increased hole drilling speed.
  · For pilot holes of concrete nails. (φ2.5, φ2.8)

  • Volume Discount

  Starting from∗ ：	7.28 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Chargeable Driver Drill for Tile

  MIYANAGA

  [Features]
  · The specially shaped carbide tip enables smooth drilling.
  · Can be used with rechargeable impact drills.
  · Adopts a specially shaped carbide tip for smooth drilling of tiles, etc.
  · The polishing angle corresponding to the blade diameter ensures the most efficient drilling.
  · With use of water, cutting performance and durability will be further improved.

  • Volume Discount

  Starting from∗ ：	9.73 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Spot Cutter

  ISHIHASHI

  The unique cross-sectional cutting edge shape provides the highest level of sharpness and durability.

  • Volume Discount

  Starting from∗ ：	14.39 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Musashi Twin Cutter

  ISHIHASHI

  The proprietary development of our "Double Special Point" enables light, sharp drilling that is free of back burrs.

  • Volume Discount

  Starting from∗ ：	6.61 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Brad Point Drill Bit Set

  DREMEL

  [Features]
  · Titanium-coated drill bit for wood.
  · 3.2 mm Shaft, Accessories for All Rotary Tools

  • Volume Discount

  Starting from∗ ：	20.91 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Drill Bit Set

  DREMEL

  With 7-piece drill bit set.
  
  [Features]
  · For wood, plastic, and soft metals.
  · Cannot be used for hard material such as glass and ceramic.
  · Accessories for all rotary tools

  • Volume Discount

  Starting from∗ ：	11.77 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Collet Chuck Retractable Precision Pin Type

  EARTH MAN

  [Features]
  · The collet chuck can also be stored inside the handle of the main unit.

  • Volume Discount

  Starting from∗ ：	9.05 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Narrow Shaft Masamune Drill

  ISHIHASHI

  Unique thinning demonstrates excellent centripetal force that makes hole punching unnecessary, enables work speed more than twice the normal speed and demonstrates outstanding sharpness and durability.

  • Volume Discount

  Starting from∗ ：	11.80 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Dry Type IT Bind Construction Design

  MIYANAGA

  [Features]
  · A dry cutting type that enables construction without concern for disposal of water and dirt.
  · Low-vibration and low-noise, enabling work at any time and place.
  · Efficient hole drilling is possible by using a size to match the IT carbide drill and IT diamond body being used.
  · Efficient drilling is possible by using a shank with a built-in pulse generation mechanism.
  · For the IT diamond body, the cutter part and the body part are coupled with screws, and when the cutting edge wears, it is possible to exchange only the cutter part, making it very economical.
  · Minimizes back surface peeling when punching through.
  · For seismic reinforcement work, waterproofing work and repair work of building outer walls in contexts where noise should not be generated, such as hospitals, schools, or when working at night.

  • Volume Discount

  Starting from∗ ：	6.62 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Diamond Drill for Wet Tile - Aqua-Shot

  MIYANAGA

  [Features]
  · Outstanding durability.
  · Water is supplied automatically to the cutting edge.
  · Can be used with an impact drill for easy cordless work.
  · Can be used with a 100 V electric drill.
  · Smoothly drills difficult-to-cut materials such as porcelain tiles.
  · Outstanding durability. Water is supplied automatically to the cutting edge.
  · Usable at electric drill rotation speeds from 1,000 to 3,000 rpm. Water is not supplied for other revolutions.
  · Body and shank can be easily attached/detached. Many sizes can be used.
  · Economical since only the cutter is exchanged.
  · The cutter can be replaced independently in the event that it wears down.
  · A water supply tank is built into the main body.
  · Water is supplied automatically to the cutting edge. Water supply tanks, hoses, and detent rods are not required.
  · Light work has been achieved.

  • Volume Discount

  Starting from∗ ：	4.59 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Poly-Click Series, Counter Bore Cutter

  MIYANAGA

  [Features]
  Carbide blade is used for a clean finish.

  • Volume Discount

  Starting from∗ ：	92.66 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Deltagon Bit for Rotation

  MIYANAGA

  Can drill holes in blocks, mortar, and regular tiles with rotation alone.
  
  [Features]
  · Straight shank. (Note that blade diameter is not the same as shank diameter.)

  • Volume Discount

  Starting from∗ ：	7.28 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Deltagon Bit for Vibration SG

  MIYANAGA

  [Features]
  · Drilling nearly perfect circles is possible.
  · Improved positioning performance.
  · The special shape firmly locks the bit in place.
  · 3-flute type that greatly improves workability and is affordable.
  · The special shape firmly locks the bit in place.
  · For pilot holes of concrete nails (φ2.5, 2.8).

  • Volume Discount

  Starting from∗ ：	7.53 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Drill for Porcelain Tile

  MIYANAGA

  [Features]
  · Cutting edge with superior sharpness and durability.
  · Adopts a specially shaped carbide tip for smooth drilling of porcelain tiles, etc.
  · Drilling porcelain tile, roof tile, granite, etc.
  · The polishing angle corresponding to the blade diameter ensures the most efficient drilling.
  · With use of water, cutting performance and durability will be further improved.

  Starting from∗ ：	8.93 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Chargeable Driver Drill for Blocks and Mortar

  MIYANAGA

  [Features]
  · Can drill as-is with a rechargeable drill without having to swap out the chuck.
  · Hexagonal shaft shank (width 6.35 mm) enables direct one-touch attachment to rechargeable impact screwdriver.
  · An integrated type with reduced flare and superior durability.
  · Adopts a unique carbide tip for incredible sharpness.

  • Volume Discount

  Starting from∗ ：	8.53 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Narrow Shaft Drill (Shank 6.5 Type)

  TRUSCO NAKAYAMA

  [Characteristics]
  Because the shank section has a trihedral angle and is resistant to slipping.
  Does not require a punch due to the specialized thinning included on the edge.
  Can be used with all kinds of materials including steel sheets, angles, new construction materials, mortar, and wood and is ideal for work at factories, outdoors, or at construction sites.
  [Application]
  Work Material: Common Steel, Softwood.

  Starting from∗ ：	11.46 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Narrow Shaft Drill (Shank 10 Type)

  TRUSCO NAKAYAMA

  [Characteristics]
  Because the shank section has a trihedral angle and is resistant to slipping.
  Does not require a punch due to the specialized thinning included on the edge.
  Can be used with all kinds of materials including steel sheets, angles, new construction materials, mortar, and wood and is ideal for work at factories, outdoors, or at construction sites.
  [Application]
  Work Material: Common Steel, Softwood.

  Starting from∗ ：	22.34 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Narrow Shaft Drill (Shank 13 Type)

  TRUSCO NAKAYAMA

  [Characteristics]
  Because the shank section has a trihedral angle and is resistant to slipping.
  Does not require a punch due to the specialized thinning included on the edge.
  Can be used with all kinds of materials including steel sheets, angles, new construction materials, mortar, and wood and is ideal for work at factories, outdoors, or at construction sites.
  [Application]
  Work Material: Common Steel, Softwood.

  Starting from∗ ：	32.09 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Hex shaft drill for iron working【1-10 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Characteristics]
  One-touch fitting to rechargeable impact drivers.
  Because the blade edge has undergone X-thinning, it is slip resistant and can be used to open holes accurately.
  [Use]
  Work Materials: Common Steel, Light Metal, Plastic, Wood, Steel, Aluminum, Woodwork, Acrylic Sheet.

  Starting from∗ ：	6.07 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Wet Mist Diamond Drill, One-Touch Type

  MIYANAGA

  Speedily drills difficult-to-cut materials such as porcelain tiles, stone materials, and roof tiles. Water is used to increase drilling efficiency by cooling the diamond blade tip and discharging chips.
  
  [Features]
  · Body and shank can be easily replaced with one touch.
  · Since the cutter and the body are connected by screws, if there is cutting edge wear, it is possible to replace only the cutter.
  · Enables low-vibration, low-noise drilling.
  · Dust will not clog in cracks. Minimizes back surface peeling when punching through.

  • Volume Discount

  Starting from∗ ：	14.81 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Wet Mist Diamond Drill, Threaded Type

  MIYANAGA

  [Features]
  · Optimal for small diameter low-vibration/low-noise work. The cutter is commonly used with a "One-Touch Wet Type Mist Diamond Drill Bit".

  • Volume Discount

  Starting from∗ ：	19.60 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Mist Diamond Drill Box Kit

  MIYANAGA

  [Features]
  · Items required for using Mist Dia all stored in 1 box.

  • Volume Discount

  Starting from∗ ：	185.38 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  S-Lock Shank Impact

  MIYANAGA

  [Features]
  · Can be used with the existing charge impact screwdriver (blade tip up to 35 mm).
  · It's possible to replace only the hex shaft of the shank, if it breaks due to metal fatigue or an overpowered electric motor.
  · The cutter can be attached/detached in a single action.

  Starting from∗ ：	8.27 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cobalt Masamune Blade【1-100 Pieces Per Package】

  ISHIHASHI

  Tip chisel has a sharp tapered cutting edge (US National Aircraft Standard) that demonstrates outstanding cutting performance with complete centripetal performance and twice as fast bite-in.

  • Volume Discount

  Starting from∗ ：	4.65 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Drill Bit

  DREMEL

  With 4/1-piece drill bit set.
  
  [Features]
  · For wood, plastic, and soft metals. Cannot be used for hard material such as glass and ceramic.
  · Accessories for all rotary tools

  Starting from∗ ：	8.58 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Taper Reamer w/ Grip

  EARTH MAN

  [Features]
  · 2-WAY grip that can also be used as T type.

  • Volume Discount

  Starting from∗ ：	23.47 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Drill for Short Stainless Steel

  EARTH MAN

  [Features]
  · Deviation minimized with short size, easily visible machined part. · Bites in hard for cross-thinning processing (3 mm or more).
  · Kovar

  • Volume Discount

  Starting from∗ ：	13.91 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Short Iron Drill, 10 Pairs No.35781

  EARTH MAN

  [Features]
  · Deviation minimized with short size, easily visible machined part. · Bites in hard for cross-thinning processing (3 mm or more).
  · Titanium coated high-speed steel.

  • Volume Discount

  Starting from∗ ：	11.09 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Use Drill, Set of 13

  EARTH MAN

  [Features]
  · Rapid type with quick scrap release.

  • Volume Discount

  Starting from∗ ：	21.74 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Drills for General Steel Material Set of 13

  EARTH MAN

  [Features]
  · Rapid type with quick scrap release.

  • Volume Discount

  Starting from∗ ：	12.75 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Hexagonal Shank Drill for Stainless Steel

  EARTH MAN

  [Features]
  · For drilling holes in stainless steel / difficult-to-cut material / general steel, etc.

  • Volume Discount

  Starting from∗ ：	11.25 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Hexagonal Shank Drill for General Metal Material

  EARTH MAN

  [Features]
  · For drilling holes in general steel, light metal, resin, or wood.

  • Volume Discount

  Starting from∗ ：	7.60 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Hexagonal Shank Rapid Type Drill for General Metal Material

  EARTH MAN

  [Features]
  · Rapid type with quick scrap release.

  • Volume Discount

  Starting from∗ ：	12.17 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Hexagonal Shank Corrugated Steel and Thin Steel Sheet Drill

  EARTH MAN

  [Features]
  · With a stopper that makes drilling easy.
  · Cross thinned for a good bite and excellent sharpness.

  • Volume Discount

  Starting from∗ ：	7.05 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Titanium Coated Drill Flute Set

  M & M

  [Features]
  · For drilling holes in general steel, stainless steel, light metal, etc.

  • Volume Discount

  Starting from∗ ：	21.23 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Hexagonal Shank Drill Bit Set for Woodworking (10-Piece Set)

  CUSTOM KOBO

  For drilling in wood and resin, etc. Stable work achieved with chuck and hexagonal shaft. Wood/resin, for rechargeable rotating drill

  • Volume Discount

  Starting from∗ ：	13.81 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Hexagonal Shank, HSS Titanium Steel Drill Blade Set (10-Piece Set)【10 Pieces Per Package】

  CUSTOM KOBO

  Enables clean and precise screw tapping. Punches hard for drilling holes quickly. For Rotary/Charging Drills, Ironworking/Wood/Light Alloys/Synthetic Resins

  • Volume Discount

  Starting from∗ ：	20.45 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Hexagonal Shank Combination Drill Blade Set (10-Piece Set)【10 Pieces Per Package】

  CUSTOM KOBO

  For both concrete and iron. Punches hard for drilling holes quickly.

  • Volume Discount

  Starting from∗ ：	16.88 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Hexagonal Shank Cobalt HSS Steel Drill Blade Set (10-Piece Set)【10 Pieces Per Package】

  CUSTOM KOBO

  Ideal for stainless steel and hard-to-cut materials. Punches hard for drilling holes quickly. For Rotary/Charging Drills, Difficult-to-cut Materials/Stainless Steel/General Steel/Cast Iron/Light Metals

  • Volume Discount

  Starting from∗ ：	26.64 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Short Size Cobalt HSS Steel Drill Blade Set (3 Sets)【3 Pieces Per Package】

  CUSTOM KOBO

  Cross thinning process. (Φ3.0 mm or more) Excellent bite. Difficult-to-cut materials, stainless steel, general steel materials, cast iron, light metal; for electric drill

  • Volume Discount

  Starting from∗ ：	6.62 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Concrete Drill Blade Set (6 Pieces)【6 Pieces Per Package】

  CUSTOM KOBO

  Excellent sharpness. Highly durable carbide tip. Electric drill bit for blocks, bricks, mortar, ALC, and for concrete

  • Volume Discount

  Starting from∗ ：	10.52 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Short Size Lower Cone Drill Blade Set (3 Sets)【3 Pieces Per Package】

  CUSTOM KOBO

  Short size for outstanding workability. The drill blade is strong and stable, and has a structure that helps prevent it from dropping out.

  • Volume Discount

  Starting from∗ ：	8.28 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Pilot Hole Cone Set (6 Pieces)【6 Pieces Per Package】

  CUSTOM KOBO

  It has excellent sharp cutting due to tapered & 2-line grooves. Wood/bamboo/plastic/aluminum/plasterboard, for electric drills, for drilling pilot holes

  • Volume Discount

  Starting from∗ ：	21.93 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Short Size Titanium Coating Drill Blade Set (3 Sets)【3 Pieces Per Package】

  CUSTOM KOBO

  Cross thinning process. (Φ3.0 mm or more) Excellent bite. Ironwork, woodwork, light alloy, synthetic resin For electric drills and for ironwork and woodwork

  • Volume Discount

  Starting from∗ ：	5.86 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...