Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Precision Machine Vises

173

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 12 Days or Less 15 Days or Less

?* Information on days to ship and prices

1
2
3
4
Next >>

V Block for Vises

MISUMI

A highly accurate V block which is essential for processing round products or chamfering with vises. The dimensions can be freely specified

Select to compare

Configure now
Min. Shipping Days ：	9 Days

Lock-Tight CV Precision Machine Vise

NABEYA

The opening is nearly doubled compared with vises of the same class. Equipped with a pressure replenishment mechanism which does not disturb the operation when the pressure drops, enabling cutting fluid or fine chips in the body to be ejected from the blow hole using the chip blow mechanism. For the mechanical type, the handle can be operated even on the fixed clamp side. The LTCV-TH is a hydraulic internal type with a specification in which the handle is operated from the fixed clamp side.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1,955.33 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Precision Modular Machine Vise

GERARDI

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1,880.12 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Precise Vise

SUPER TOOL

[Features]
· A precision vise for ultra-precision finishing.
· Can be utilized for a wide range of grinding, cutting, and drilling.
· The round object machining V-groove (G) is attached to the crosswise direction of the mobile jaw, or the lengthwise/crosswise direction (SPV80-150).
· Sub-zero treatment minimizes aging deterioration.

Select to compare

Configure now
Starting from^∗ ：	1,794.84 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Precision Sine Vise

SAKAESEIKI

[Features]
· Sine vise that is easy to use with high accuracy. The material used is SKS-3. Hardening hardness is set to HRC62°.
· Incline from 0 to 45° and suitable for precision angle grinding of small accessories.
· Able to set highly accurate angle setting, since it is the sign vise that a block gauge is used.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1,930.48 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Precision Screw Vise

SAKAESEIKI

[Features]
· A screw type precision vise machined with high accuracy.
· Maximum workpiece size is 150 mm.
The material used is SKS-3 with a hardening hardness of HRC62°.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	787.37 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

6355V Prismatic clamping block, single

AMF

Prismatic clamping block, single case hardened and ground The product is available per 1 peace.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	1,615.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Parallel Block for Vises - Plain Model

Parallel Block for Vises - Plain Model【2 Pieces Per Package】

MISUMI

[Features]
-Parallel block that allows you to set the height in 1 mm increments and freely adjust the span of the workpiece
-Raw material that is safe even when the tool is engaged and hardening material with low settling are available.

Select to compare

Configure now
Min. Shipping Days ：	10 Days

Parallel Block (Not Quenched), Stepped Model

MISUMI

[Features]
-The raw material makes it easy to avoid tool breakage during machining
[Application]
-Useful for drilling through the hole near the flange of a workpiece.

Select to compare

Configure now
Min. Shipping Days ：	10 Days

Lock-Tight Quick ONE Vise

NABEYA

The mechanical pressure increase mechanism can easily increase the pressure in 1 rotation, with minimal effect of changing temperature on the tightening force and no tool replacement, etc., required. Easy to set the tightening force by simply turning the adjustment dial by hand. Once the tightening force is set, the structure allows operation only at that tightening force. LTFH type is a vertical/horizontal machining center type that's used with angle plate adhered.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	2,589.32 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Lock-Tight FA Precision Machine Vise

NABEYA

[Features]
· Single units, multiple units, and connected use are possible.
· The parallel accuracy is within 0.01.
· The lifting prevention mechanism suppresses the lifting of workpieces.
· Higher accuracy than the old JIS O class.
· The body and fixed jaw are integrally molded to maintain high rigidity.
· The sliding surface has excellent wear resistance as it has been flame quenched (HRC45).
· The body is made of a ductile material that prevents warpage when tightened.
· The opening is nearly doubled compared with vises of the same class, making it capable of clamping large workpieces.
· It has a large opening depth and can securely tighten tall workpieces.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1,713.69 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Maker's Vise Wedge Locking Tool

NABEYA

[Features]
· The accuracy is higher than the former JIS 0 class.
· Tightening from the front is possible when mounted on a 1, 2 or 4-sided angle plate.
· Uses SCM440 material that is hardened to HRC50 or higher to retain precision for longer.
· Back surface has a guide block so precision can be easily improved

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1,688.60 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Precision Vise (Handle Type)

TRUSCO NAKAYAMA

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	414.95 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

RIKEN Precision Vise

RIKEN KEISOKUKI

For each of the normal, horizontal, and vertical positions, there is 5 μm accuracy for parallelism and squareness. This product has all faces fully quenched.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1,676.05 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Level Adjustment Block

SUPER TOOL

[Features]
· It moves straight up and down smoothly.
· Built-in bearing allows level adjustments to be made with minimal force.
· Ball swivel can be set to the desired angle.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	218.91 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Quick vise EA525DD-1

ESCO

[Features]
·Pull and drive orientation center lever to set jaws, then lower lock lever to fix object.
·Shape of mount base differs depending on size.
・ It is made of cast iron

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	275.56 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

High Precision Screw Vise

SAKAESEIKI

[Features]
· A screw type precision vise machined with high accuracy. Maximum workpiece size is 150 mm.
· The material used is SKS-3 with a quenching hardness of HRC62°.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1,789.24 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Precision 4-Jaw Vise

SAKAESEIKI

[Features]
· Multiple cavity parallel vise for electric discharge machining, grinding and light cutting of small accessories. Enhances work efficiency.
· Equipped with stoppers that allow multiple workpieces to be positioned with high accuracy.
· The fitting can be easily removed from the main body to allow for sludge cleaning.
· Available in SKS3 (HRC62°) material or martensitic stainless steel (HRC56°) material.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	2,730.85 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

6348PS Parallel supports-pairs, standard, 100 mm long

AMF

Parallel supports-pairs, standard, 100 mm long Plain parallel, fine-ground, in pairs.
Size data on front of product.
Sets offer a large range with 1 mm graduation.
Case-hardened.

Pair tolerance tp at height IT 5.
Rated dimensional tolerance in height and width to DIN ISO 2768m.
Remaining dimensions to DIN ISO 2768m. The product is available per 1 peace.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	54.81 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

6348SP Parallel supports-set, super-precision

AMF

Parallel supports-set, super-precision In wooden stand.
Plain parallel, fine-ground, in pairs.
Size data on front of product.
Sets offer a large range with 1 mm graduation.
Case-hardened.

Pair tolerance tp at height IT 5.
Rated dimensional tolerance in height and width 0.01 mm.
Remaining dimensions to DIN ISO 2768m. The product is available per 1 peace.

Select to compare

Configure now
Starting from^∗ ：	1,090.38 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

6349P Parallel supports-pairs, precision

AMF

Parallel supports-pairs, precision In wooden stand.
Plain parallel, fine-ground, in pairs.
Size data on the product.

Pair tolerance tp at height IT 5.
Rated dimensional tolerance in height 0.01 mm.
Remaining dimensions to DIN ISO 2768m. The product is available per 1 peace.

Select to compare

Configure now
Starting from^∗ ：	1,413.46 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Parallel connector, Type I, aluminium (10901)

NORELEM

· Lightweight version for weight-optimised structures

· Two-part, enables easy assembly

· Precise parallel connections

· Pre-assembled

Select to compare

Configure now
Starting from^∗ ：	5.70 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Adapter for precision vice, form A (33225)

NORELEM

· Versatile use

· Compatible with quick-action clamps

Select to compare

Configure now
Starting from^∗ ：	200.36 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Parallel Block for Vises - Stepped Model

Parallel Block for Vises - Stepped Model【2 Pieces Per Package】

MISUMI

[Features]
The stepped parallel block is recommended when you are concerned about cutting tool malfunction
Determine the height direction in 1-mm increments and freely adjust the gripping width of the workpiece
-Raw material that is safe even when the tool malfunctions and hardening material with low settling are available.

Select to compare

Configure now
Min. Shipping Days ：	10 Days

Vise Mouthpiece - Quenched Model / Self-Cut Model -

MISUMI

[Features]
-Jaw cap for vice whose dimensions can be customized, and it can be attached to any vice of the company
-EN 1.1191 Equiv. type which can be self-cut, and the aluminium type in addition to the hardness material type which can be used for a long time are available.

Select to compare

Configure now
Min. Shipping Days ：	9 Days

Angle Block for Vises

MISUMI

An angle block which is essential for angle processing with vises. The dimensions can be freely specified

Select to compare

Configure now
Min. Shipping Days ：	9 Days

Jig Vise Jaw Plates

NABEYA

Optional parts for the machining vise series.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	323.59 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Handle Joint for Lock-tight CV Precision Machine Vise

NABEYA

[Features]
A component for Lock-Tight CV Precision Machine Vises.
A handle joint.
· RoHS compliant
·Overall length: 200 mm / 250 mm / 300 mm / 350 mm / 400 mm
·Compatible models: Common to all CV models

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	72.19 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Lock-tight 5-Axis Machine Vise

NABEYA

Raised structure that avoids the interference of the machine spindle: The length of the cutter can be shortened to reduce processing time and labor. Lock-tight lift prevention mechanism: A hemispherical segment is used to apply force on the movable part in a downward sloping direction at 45 degrees in order to prevent the workpiece from rising up. Socket replacement type: Three types of socket are included as standard and can be selected according to the machining conditions.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	2,542.40 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Lock-tight Double Clamp Vise

NABEYA

Double clamp type when shipped. Two workpieces can be quickly clamped at the same time even when they have different sizes. When tightened, the Lock-tight lift prevention mechanism restrains the workpiece from rising up. Can be made into a single clamp type as the standard accessories are reassembled, and the body is made of ductile cast iron that has been quenched on the sliding surface.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	3,411.69 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Lock-Tight Precision Machine Vise L Type

NABEYA

The opening is 45% bigger compared with vises of the same type (LT150M). Weight is 20% lighter than vises of the same size to make it easy to carry. The lifting prevention mechanism suppresses the uplift of a movable object or workpiece. It is made of ductile cast iron, preventing warping and damage during tightening. The sliding part has excellent wear resistance as it has been flame quenched.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1,293.02 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

FA Mouthpiece for Machine Vise

NABEYA

[Features]
A standard fitting for Machine Vise Series.
·Thread diameter: M8/M10/M12
·Compatible vise: LTFV75/LTFV100Q/LTFV·LTFH125Q/LTFV·LTFH150Q/LTFV·LTFH175Q

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	149.39 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Guide Block

Guide Block【2 Pieces Per Package】

NABEYA

S45C machine vise series guide block.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	70.57 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Foot Jaw

NABEYA

Convenient for 5-face machining of the workpiece. Securely clamps the workpiece base. Two types of clamp are available depending on the workpiece. FOJ-BS is suitable for ferrous metals and FOJ-GS for non-ferrous metals.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	460.44 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Pull Down Vise

Pull Down Vise【2 Pieces Per Package】

NABEYA

Handles small mouth openings caused by defects in machine vise, milling vise, shaper vise, or similar. Can grasp without restriction by matching up the table of the planar, shaper, milling cutter, or horizontal boring machine, etc., and the workpiece. The workpiece can be prevented from rising up with strong clamping as it is pulled down while clamped. Thanks to the use of specially made ductile iron, the body is damage-proof.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	593.21 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Flat Jaw Plates for 5-Axis Machine Vise

NABEYA

[Features]
A flat jaw plate for Lock-Tight 5-Axis Machine Vises.
·Compatible vise: LT5AU-75 (F,FM)/LT5AU-75,100 (M)/LT5AU-100 (M)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	129.00 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Joint Bar

NABEYA

[Features]
A Joint bar for Lock-Tight MC Jig Vises.
·Effective length: 0 mm / 150 mm

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	67.74 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

2 Piece Vise

NABEYA

[Features]
· Capable of easily clasping long objects that cannot be tightened with machine vises.
· Can clamp any work whatever the table (milling machine, sabre, boring machine, etc.) is.
· Convenient for processing of mass produced products.
· Large opening depth.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1,079.66 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Lock-Tight MC Jig Vise

NABEYA

A jig vise for MS.FA with a lifting prevention mechanism that suppresses the uplift of a movable object or workpiece. It incorporates a patent-pending hydraulic mechanism and enables smooth operation. Cost cutting is also possible through use as a horizontal, upright, or MC vise. Can be used for an upright MC or milling machine with the same precision as a 2-face, 4-face, or angle rest, on a horizontal type MC.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	9,101.83 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Lock-Tight CV Precision Machine Vise Jaws

NABEYA

Standard clamp for machining vise.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	177.64 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Work Stop

NABEYA

Optional parts for the machining vise series.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	100.62 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Tool Maker's Vise

NABEYA

[Features]
· Made of fully quenched materials, this is a precision tool that is finished by polishing.
· The accuracy is within 5 microns in both squareness and parallelism.
· Each machine comes with a beautiful wooden box case.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1,801.60 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Pull Down Vise Mouthpiece Coarse

Pull Down Vise Mouthpiece Coarse【2 Pieces Per Package】

NABEYA

Standard clamp (coarse) for pull-down vise (free jaw vise).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	103.31 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Machine Vise Handle

NABEYA

Machine vise handle.
[Features]
· Machine vise replacement part.
· Optional part for the machine vise series.
[Application]
· Replacement handle for the machine vise.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	81.09 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Mold Vise

NABEYA

Ideal for machining mold plates. Features a large opening and fast-feed mechanism. The jaw opens 30% larger than conventional hydraulic vises to make the unit 30% more compact (in-house comparison). The main body and movable parts are made of ductile cast iron that does not get damaged, and the sliding surface features outstanding wear resistance thanks to the flame quenching. Provides overwhelmingly superior cost performance when compared with vises of the same size.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	2,893.62 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	MISUMI	NABEYA	GERARDI	SUPER TOOL	SAKAESEIKI	SAKAESEIKI	AMF	MISUMI	MISUMI	NABEYA	NABEYA	NABEYA	TRUSCO NAKAYAMA	RIKEN KEISOKUKI	SUPER TOOL	ESCO	SAKAESEIKI	SAKAESEIKI	AMF	AMF	AMF	NORELEM	NORELEM	MISUMI	MISUMI	MISUMI	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA
Product Series	V Block for Vises	Lock-Tight CV Precision Machine Vise	Precision Modular Machine Vise	Precise Vise	Precision Sine Vise	Precision Screw Vise	6355V Prismatic clamping block, single	Parallel Block for Vises - Plain Model【2 Pieces Per Package】	Parallel Block (Not Quenched), Stepped Model	Lock-Tight Quick ONE Vise	Lock-Tight FA Precision Machine Vise	Maker's Vise Wedge Locking Tool	Precision Vise (Handle Type)	RIKEN Precision Vise	Level Adjustment Block	Quick vise EA525DD-1	High Precision Screw Vise	Precision 4-Jaw Vise	6348PS Parallel supports-pairs, standard, 100 mm long	6348SP Parallel supports-set, super-precision	6349P Parallel supports-pairs, precision	Parallel connector, Type I, aluminium (10901)	Adapter for precision vice, form A (33225)	Parallel Block for Vises - Stepped Model【2 Pieces Per Package】	Vise Mouthpiece - Quenched Model / Self-Cut Model -	Angle Block for Vises	Jig Vise Jaw Plates	Handle Joint for Lock-tight CV Precision Machine Vise	Lock-tight 5-Axis Machine Vise	Lock-tight Double Clamp Vise	Lock-Tight Precision Machine Vise L Type	FA Mouthpiece for Machine Vise	Guide Block【2 Pieces Per Package】	Foot Jaw	Pull Down Vise【2 Pieces Per Package】	Flat Jaw Plates for 5-Axis Machine Vise	Joint Bar	2 Piece Vise	Lock-Tight MC Jig Vise	Lock-Tight CV Precision Machine Vise Jaws	Work Stop	Tool Maker's Vise	Pull Down Vise Mouthpiece Coarse【2 Pieces Per Package】	Machine Vise Handle	Mold Vise
CAD							2D / 3D												2D / 3D
Starting from^∗	-	1,955.33 € *Unit price with basic configuration Volume Discount	1,880.12 € *Unit price with basic configuration Volume Discount	1,794.84 € *Unit price with basic configuration	1,930.48 € *Unit price with basic configuration Volume Discount	787.37 € *Unit price with basic configuration Volume Discount	1,615.39 € *Unit price with basic configuration	-	-	2,589.32 € *Unit price with basic configuration Volume Discount	1,713.69 € *Unit price with basic configuration Volume Discount	1,688.60 € *Unit price with basic configuration Volume Discount	414.95 € *Unit price with basic configuration Volume Discount	1,676.05 € *Unit price with basic configuration Volume Discount	218.91 € *Unit price with basic configuration Volume Discount	275.56 € *Unit price with basic configuration Volume Discount	1,789.24 € *Unit price with basic configuration Volume Discount	2,730.85 € *Unit price with basic configuration Volume Discount	54.81 € *Unit price with basic configuration	1,090.38 € *Unit price with basic configuration	1,413.46 € *Unit price with basic configuration	5.70 € *Unit price with basic configuration	200.36 € *Unit price with basic configuration	-	-	-	323.59 € *Unit price with basic configuration Volume Discount	72.19 € *Unit price with basic configuration Volume Discount	2,542.40 € *Unit price with basic configuration Volume Discount	3,411.69 € *Unit price with basic configuration Volume Discount	1,293.02 € *Unit price with basic configuration Volume Discount	149.39 € *Unit price with basic configuration Volume Discount	70.57 € *Unit price with basic configuration Volume Discount	460.44 € *Unit price with basic configuration Volume Discount	593.21 € *Unit price with basic configuration Volume Discount	129.00 € *Unit price with basic configuration Volume Discount	67.74 € *Unit price with basic configuration Volume Discount	1,079.66 € *Unit price with basic configuration Volume Discount	9,101.83 € *Unit price with basic configuration Volume Discount	177.64 € *Unit price with basic configuration Volume Discount	100.62 € *Unit price with basic configuration Volume Discount	1,801.60 € *Unit price with basic configuration Volume Discount	103.31 € *Unit price with basic configuration Volume Discount	81.09 € *Unit price with basic configuration Volume Discount	2,893.62 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	9 Days	7 Days	6 Days	5 Days	9 Days	7 Days	5 Days	10 Days	10 Days	7 Days	8 Days	8 Days	6 Days	12 Days	5 Days	6 Days	9 Days	9 Days	5 Days	5 Days	5 Days	4 Days	4 Days	10 Days	9 Days	9 Days	8 Days	8 Days	8 Days	8 Days	7 Days	7 Days	5 Days	8 Days	5 Days	8 Days	8 Days	7 Days	8 Days	7 Days	7 Days	8 Days	10 Days	5 Days	8 Days