Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Hardness-Standard Pieces

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 11 Days or Less 12 Days or Less 60 Days or Less

?* Information on days to ship and prices

Promotional pricing

HRC Hardness-Standard Piece

YAMAMOTO SCIENTIFIC TOOL LABORATORY

For durometer checks

[Features]
· Variation in hardness is ideal.
· Hardness reference is based on internationally recognized values.
· Shore hardness reference blocks strictly express rebound hardness

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	127.81 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

HV Hardness-Standard Piece

YAMAMOTO SCIENTIFIC TOOL LABORATORY

[Features]
· Used as a hardness reference piece for checking durometers, allowing measurement with peace of mind.
· Variation in hardness is ideal.
· Hardness reference is based on internationally recognized values.
· Shore hardness reference blocks strictly express rebound hardness

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	239.64 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

HS Hardness-Standard Piece

YAMAMOTO SCIENTIFIC TOOL LABORATORY

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	240.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

HBW Hardness-Standard Piece

YAMAMOTO SCIENTIFIC TOOL LABORATORY

For durometer checks

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	184.44 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Charpy Impact Reference Piece

YAMAMOTO SCIENTIFIC TOOL LABORATORY

[Features]
· Adopts (1) Strictly selected materials: ultra-high cleanliness steel (SNCM439 equivalent) to absolutely minimize suction energy variation (CV: 3% or less). (2) Manufacturing process: strict management. (3) Specially heat treated: Fundamental heat treatment carried out, conforming to JIS B7740 (impact reference specimen for Charpy testing).
· NK certified.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	227.98 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

HMV Hardness-Standard Piece

YAMAMOTO SCIENTIFIC TOOL LABORATORY

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	416.57 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

HR15N Hardness-Standard Piece

YAMAMOTO SCIENTIFIC TOOL LABORATORY

For durometer checks

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	181.00 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

HR30TS Hardness-Standard Piece

YAMAMOTO SCIENTIFIC TOOL LABORATORY

It is used for hardness tester verification.
Hardness standards are based on globally recognised figures.
Normal nominal hardness: 32 to 78.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	180.25 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

HRBS Hardness-Standard Piece

YAMAMOTO SCIENTIFIC TOOL LABORATORY

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	168.36 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

D-HRB Hardness-Standard Piece

YAMAMOTO SCIENTIFIC TOOL LABORATORY

[Features]
·The variation in hardness is extremely ideal.
·Hardness standards are based on globally recognized figures.
·The Shore standard hardness test block strictly expresses the rebound hardness.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	215.47 €
Min. Shipping Days ：	11 Days

*Unit price with basic configuration

HLD Hardness-Standard Piece

YAMAMOTO SCIENTIFIC TOOL LABORATORY

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	598.99 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Hardnester

YAMAMOTO SCIENTIFIC TOOL LABORATORY

Tool for easily and rapidly measuring metal hardness. For general use.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	841.55 €
Min. Shipping Days ：	11 Days

*Unit price with basic configuration

HRES Hardness-Standard Piece

YAMAMOTO SCIENTIFIC TOOL LABORATORY

ISO / JIS compliant reference test piece for indirect verification of hardness testers.
Hardness standards are based on globally recognised figures.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	263.39 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

HNW Hardness-Standard Piece

YAMAMOTO SCIENTIFIC TOOL LABORATORY

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	2,815.58 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

HR15TS Hardness-Standard Piece

YAMAMOTO SCIENTIFIC TOOL LABORATORY

It is for checking hardness tester.
Hardness standards are based on globally recognised figures.
Standard nominal hardness: 78 to 87.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	180.25 €
Min. Shipping Days ：	11 Days

*Unit price with basic configuration

HR30N Hardness-Standard Piece

YAMAMOTO SCIENTIFIC TOOL LABORATORY

For durometer checks

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	181.00 €
Min. Shipping Days ：	11 Days

*Unit price with basic configuration

HRA Hardness-Standard Piece

YAMAMOTO SCIENTIFIC TOOL LABORATORY

For durometer checks

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	181.00 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

HRFS Hardness-Standard Piece

YAMAMOTO SCIENTIFIC TOOL LABORATORY

ISO / JIS compliant reference test piece for indirect verification of hardness testers.
Hardness standards are based on globally accepted figures.
Normal nominal hardness: 90

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	263.39 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

UMV Hardness-Standard Piece

YAMAMOTO SCIENTIFIC TOOL LABORATORY

Hardness variation is extremely ideal.
Hardness standards are based on globally accepted figures.
The Shore reference piece strictly expresses rebound hardness.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1,179.63 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

High Precision Hardness Standard Specimen (ISO-JIS Compliant) Leap HL

YAMAMOTO SCIENTIFIC TOOL LABORATORY

[Features]
· High precision hardness reference block compliant with JIS/ISO.
· Widely used for daily management of various hardness testers both in Japan and overseas, with high uniformity and stability achieving "zero dispersion of hardness", with international and universal pricing.
· A complete lineup for Brinell to nanoindentation.
[Applications]
· Daily pre-use inspection by JIS of various hardness testers: Reference test piece for hardness using indirect verification.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	582.25 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Vickers Hardness Reference Material

MITUTOYO

Hardness reference materials in quality control:
The boost for your process safety! The daily verification, performed by the user, is described in the according hardness testing standards and significantly contributes to quality management processes. In the daily verification process, all parameters of the hardness test system that build up to the hardness value, are examined by indentations on the hardness reference material.
This periodical inspection of the machine by means of hardness reference materials should be carried out immediately before the daily start of the test schedule.
An according documentation enhances the process safety, as value shifts due to damage or malfunction can be detected easily. In addition, the repeatability of results of the hardness testing machine can also be checked with the hardness reference materials.
Mitutoyo offers a comprehensive range of hardness reference materials (hardness test blocks) in different materials with hardness levels ranging from 80HV to 2100HV to suit your quality management procedure perfectly.
The tolerance for the nominal value of steel and aluminium hardness testblocks is ± 25HV. (Does not apply for carbide materials) For carbide reference materials, the actual calibrated value can be significantly higher.
Mitutoyo reference materials:
High-end quality Made in Germany - Independent DAkkS calibration according to DIN EN ISO 6507 and/or ASTM E92 in an accredited laboratory Large square or rectangular surface with large space advantage over triangular or round test blocks Short delivery time MPE “Maximum Permissible Error” of the hardness testing system engraved (does apply for carbide materials) – all relevant information at a glance.
If the diagonal lengths are outside the 20µm limit of ISO 6507 the reference material is exclusively supplied with ASTM E92 calibration certificates.
A range of additional services can be ordered:
- Up to three different scales on one reference material (Does not apply for Brinell materials)
- A lasered grid on the surface for accurate indentation spacing
- Alternative ASTM accredited calibration.
- Double calibration according to ISO and ASTM standards
- A tighter tolerance of ± 15HV for the nominal value (Does not apply for carbide materials)
- Compare the surface sizes for the evaluation of the price - performance ratio.

Select to compare

Configure now
Starting from^∗ ：	560.53 €
Min. Shipping Days ：	60 Days

*Unit price with basic configuration

Shore Hardness Reference Material

MITUTOYO

Shore test specimen sets (3pcs.)
Please note:
- Recommended storage temperature: 23 °C ±5 °C
- Humidity 50 % ±15 %
For best results, climate to laboratory conditions for min. 12 hours: 23 °C ±1 °C. Humidity 50 % ±10 %. Incorrect room temperature and humidity causes other readings. Annual recalibration of test specimen is recomended.
Shore test specimen should not be older than 2 years from initial calibration. Please replace after 2 years.

Select to compare

Configure now
Starting from^∗ ：	335.13 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Rockwell Hardness Reference Material

MITUTOYO

Hardness reference materials in quality control:
The boost for your process safety! The daily verification, performed by the user, is described in the according hardness testing standards and significantly contributes to quality management processes.
In the daily verification process, all parameters of the hardness test system that build up to the hardness value, are examined by indentations on the hardness reference material.
This periodical inspection of the machine by means of hardness reference materials should be carried out immediately before the daily start of the test schedule.
An according documentation enhances the process safety, as value shifts due to damage or malfunction can be detected easily.
In addition, the repeatability of results of the hardness testing machine can also be checked with the hardness reference materials.
Mitutoyo offers a comprehensive range of hardness reference materials (hardness test blocks) in different materials with hardness levels to suit your quality management procedure perfectly.
Mitutoyo reference materials:
High-end quality Made in Germany - Independent DAkkS calibration according to DIN EN ISO 6508 and/or ASTM E18 in an accredited laboratory Large square or rectangular surface with large space advantage over triangular or round test blocks Short delivery time MPE "Maximum Permissible Error" of the hardness testing system engraved (does apply for carbide materials) – all relevant information at a glance.
A range of additional services can be ordered:
- Up to three different scales on one reference material (Does not apply for Brinell materials)
- A lasered grid on the surface for accurate indentation spacing
- Alternative ASTM accredited calibration
- Double calibration according to ISO and ASTM standards
- Compare the surface sizes for the evaluation of the price - performance ratio.

Select to compare

Configure now
Starting from^∗ ：	398.68 €
Min. Shipping Days ：	60 Days

*Unit price with basic configuration

Leeb Hardness Reference Material

MITUTOYO

Select to compare

Configure now
Starting from^∗ ：	313.75 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Knoop Hardness Reference Material

MITUTOYO

Hardness reference materials in quality control:
The boost for your process safety! The daily verification, performed by the user, is described in the according hardness testing standards and significantly contributes to quality management processes.
In the daily verification process, all parameters of the hardness test system that build up to the hardness value, are examined by indentations on the hardness reference material.
This periodical inspection of the machine by means of hardness reference materials should be carried out immediately before the daily start of the test schedule.
An according documentation enhances the process safety, as value shifts due to damage or malfunction can be detected easily. In addition, the repeatability of results of the hardness testing machine can also be checked with the hardness reference materials.
Mitutoyo offers a comprehensive range of hardness reference materials (hardness test blocks) in different materials with hardness levels ranging from 200 to 2100HK to suit your quality management procedure perfectly.
The tolerance for the nominal value of steel and aluminium hardness testblocks is ± 25HK. (Does not apply for carbide materials) For carbide reference materials, the actual calibrated value can be significantly higher.
Mitutoyo reference materials:
High-end quality Made in Germany - Independent DAkkS calibration according to DIN EN ISO 4545 and/or ASTM E92 in an accredited laboratory Large square or rectangular surface with large space advantage over triangular or round test blocks Short delivery time MPE "Maximum Permissible Error" of the hardness testing system engraved (does apply for carbide materials) – all relevant information at a glance.
If the diagonal lengths are outside the 20µm limit of ISO 4545 the reference material is exclusively supplied with ASTM E92 calibration certificates.
A range of additional services can be ordered:
- Up to three different scales on one reference material (Does not apply for Brinell materials)
- A lasered grid on the surface for accurate indentation spacing
- Alternative ASTM accredited calibration.
- Double calibration according to ISO and ASTM standards
- A tighter tolerance of ± 15HK for the nominal value (Does not apply for carbide materials)
- Compare the surface sizes for the evaluation of the price - performance ratio.

Select to compare

Configure now
Starting from^∗ ：	560.53 €
Min. Shipping Days ：	60 Days

*Unit price with basic configuration

Diamond Indenter for Vickers Test

MITUTOYO

Mitutoyo indenters for Vickers hardness test
As the interface between machine and material, the indenter must be of immaculate quality.
Therefore Mitutoyo only uses diamond indenters from the most experienced suppliers.
The indenters are calibrated in the highest standard calibration laboratories in the DAkkS accreditation body, accredited according to ISO 17025 and traceable to the PTB.
Constant development at our calibration partners secures an unmatched quality level.
Vickers diamond indenter feature DAkkS calibration certificates according to DIN EN ISO 6507-2 and/or ASTM E92.
The line of conjunction between opposite faces of the diamond pyramid are measured with the latest technologies.
The line appears due to the grinding process.
From that parameter, the usability of the indenter is determined by categorising them by the length of the line.
Mitutoyo offers Vickers pyramid indenters usable from HV0.001 (junction line 0.5µm), HV0.2 (junction line 1.0µm) and HV5 (junction line 2.0µm), at different price levels.
The values include uncertainty of measurement. Therefore it is impossible to judge the line of a Micro Vickers indenter with a conventional light microscope.

Select to compare

Configure now
Starting from^∗ ：	438.16 €
Min. Shipping Days ：	60 Days

*Unit price with basic configuration

Diamond Indenter for Knoop Test

MITUTOYO

Mitutoyo indenters for Knoop hardness test
As the interface between machine and material, the indenter must be of immaculate quality.
Therefore Mitutoyo only uses diamond indenters from the most experienced suppliers.
The indenters are calibrated in the highest standard calibration laboratories in the DAkkS accreditation body, accredited according to ISO 17025 and traceable to the PTB.
Constant development at our calibration partners secures an unmatched quality level.
Knoop diamond indenter feature DAkkS calibration certificates according to DIN EN ISO 4545-2 and/or ASTM E92.
The line of conjunction between opposite faces of the diamond pyramid are measured with the latest technologies.
The line appears due to the grinding process. The maximum length of the conjunction line is 1.0µm.

Select to compare

Configure now
Starting from^∗ ：	1,009.21 €
Min. Shipping Days ：	60 Days

*Unit price with basic configuration

Diamond Cone Indenter for Rockwell Test, Standard Type

MITUTOYO

Mitutoyo indenters for Rockwell hardness test
As the interface between machine and material, the indenter must be of immaculate quality.
Therefore Mitutoyo only uses diamond indenters from the most experienced suppliers.
The indenters are calibrated in the highest standard calibration laboratories in the DAkkS accreditation body, accredited according to ISO 17025 and traceable to the PTB.
Constant development at our calibration partners secures an unmatched quality level.
Rockwell diamond indenter feature DAkkS calibration certificates according to DIN EN ISO 6508-2 and/or ASTM E18.
A function test, verifying the applicability of the indenter in regard of various indentation depth levels under different test forces, is optionally available.
Ball holders are made by Mitutoyo, and are supplied without calibration certificate for the included ball.

Select to compare

Configure now
Starting from^∗ ：	453.95 €
Min. Shipping Days ：	60 Days

*Unit price with basic configuration

Diamond Cone Indenter

MITUTOYO

Select to compare

Configure now
Starting from^∗ ：	400.00 €
Min. Shipping Days ：	60 Days

*Unit price with basic configuration

Brinell Hardness Reference Material

MITUTOYO

Hardness reference materials in quality control:
The boost for your process safety! The daily verification, performed by the user, is described in the according hardness testing standards and significantly contributes to quality management processes.
In the daily verification process, all parameters of the hardness test system that build up to the hardness value, are examined by indentations on the hardness reference material.
This periodical inspection of the machine by means of hardness reference materials should be carried out immediately before the daily start of the test schedule.
An according documentation enhances the process safety, as value shifts due to damage or malfunction can be detected easily. In addition, the repeatability of results of the hardness testing machine can also be checked with the hardness reference materials.
Mitutoyo offers a comprehensive range of hardness reference materials (hardness test blocks) in different materials with hardness levels ranging from 80 to 650HBW to suit your quality management procedure perfectly.
The tolerance for the nominal value of the hardness testblock is ± 25HBW.
Mitutoyo reference materials:
High-end quality Made in Germany - Independent DAkkS calibration according to DIN EN ISO 6506 and/or ASTM E10 in an accredited laboratory Large square or rectangular surface with large space advantage over triangular or round test blocks Short delivery time MPE "Maximum Permissible Error" of the hardness testing system engraved (does apply for carbide materials) – all relevant information at a glance.
A range of additional services can be ordered:
- Up to three different scales on one reference material (Does not apply for Brinell materials)
- A lasered grid on the surface for accurate indentation spacing
- Alternative ASTM accredited calibration.
- Double calibration according to ISO and ASTM standards
- A tighter tolerance of ± 15HBW for the nominal value
- Compare the surface sizes for the evaluation of the price - performance ratio.

Select to compare

Configure now
Starting from^∗ ：	453.95 €
Min. Shipping Days ：	60 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Hardness Classification

	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	YAMAMOTO SCIENTIFIC TOOL LABORATORY	YAMAMOTO SCIENTIFIC TOOL LABORATORY	YAMAMOTO SCIENTIFIC TOOL LABORATORY	YAMAMOTO SCIENTIFIC TOOL LABORATORY	YAMAMOTO SCIENTIFIC TOOL LABORATORY	YAMAMOTO SCIENTIFIC TOOL LABORATORY	YAMAMOTO SCIENTIFIC TOOL LABORATORY	YAMAMOTO SCIENTIFIC TOOL LABORATORY	YAMAMOTO SCIENTIFIC TOOL LABORATORY	YAMAMOTO SCIENTIFIC TOOL LABORATORY	YAMAMOTO SCIENTIFIC TOOL LABORATORY	YAMAMOTO SCIENTIFIC TOOL LABORATORY	YAMAMOTO SCIENTIFIC TOOL LABORATORY	YAMAMOTO SCIENTIFIC TOOL LABORATORY	YAMAMOTO SCIENTIFIC TOOL LABORATORY	YAMAMOTO SCIENTIFIC TOOL LABORATORY	YAMAMOTO SCIENTIFIC TOOL LABORATORY	YAMAMOTO SCIENTIFIC TOOL LABORATORY	YAMAMOTO SCIENTIFIC TOOL LABORATORY	YAMAMOTO SCIENTIFIC TOOL LABORATORY	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO	MITUTOYO
Product Series	HRC Hardness-Standard Piece	HV Hardness-Standard Piece	HS Hardness-Standard Piece	HBW Hardness-Standard Piece	Charpy Impact Reference Piece	HMV Hardness-Standard Piece	HR15N Hardness-Standard Piece	HR30TS Hardness-Standard Piece	HRBS Hardness-Standard Piece	D-HRB Hardness-Standard Piece	HLD Hardness-Standard Piece	Hardnester	HRES Hardness-Standard Piece	HNW Hardness-Standard Piece	HR15TS Hardness-Standard Piece	HR30N Hardness-Standard Piece	HRA Hardness-Standard Piece	HRFS Hardness-Standard Piece	UMV Hardness-Standard Piece	High Precision Hardness Standard Specimen (ISO-JIS Compliant) Leap HL	Vickers Hardness Reference Material	Shore Hardness Reference Material	Rockwell Hardness Reference Material	Leeb Hardness Reference Material	Knoop Hardness Reference Material	Diamond Indenter for Vickers Test	Diamond Indenter for Knoop Test	Diamond Cone Indenter for Rockwell Test, Standard Type	Diamond Cone Indenter	Brinell Hardness Reference Material
Starting from^∗	127.81 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	239.64 € *Unit price with basic configuration Volume Discount	240.39 € *Unit price with basic configuration Volume Discount	184.44 € *Unit price with basic configuration Volume Discount	227.98 € *Unit price with basic configuration Volume Discount	416.57 € *Unit price with basic configuration Volume Discount	181.00 € *Unit price with basic configuration Volume Discount	180.25 € *Unit price with basic configuration Volume Discount	168.36 € *Unit price with basic configuration Volume Discount	215.47 € *Unit price with basic configuration Volume Discount	598.99 € *Unit price with basic configuration Volume Discount	841.55 € *Unit price with basic configuration Volume Discount	263.39 € *Unit price with basic configuration Volume Discount	2,815.58 € *Unit price with basic configuration Volume Discount	180.25 € *Unit price with basic configuration Volume Discount	181.00 € *Unit price with basic configuration Volume Discount	181.00 € *Unit price with basic configuration Volume Discount	263.39 € *Unit price with basic configuration Volume Discount	1,179.63 € *Unit price with basic configuration Volume Discount	582.25 € *Unit price with basic configuration Volume Discount	560.53 € *Unit price with basic configuration	335.13 € *Unit price with basic configuration	398.68 € *Unit price with basic configuration	313.75 € *Unit price with basic configuration	560.53 € *Unit price with basic configuration	438.16 € *Unit price with basic configuration	1,009.21 € *Unit price with basic configuration	453.95 € *Unit price with basic configuration	400.00 € *Unit price with basic configuration	453.95 € *Unit price with basic configuration
Min. Shipping Days	Same day	7 Days	5 Days	7 Days	6 Days	7 Days	7 Days	12 Days	7 Days	11 Days	8 Days	11 Days	12 Days	12 Days	11 Days	11 Days	7 Days	12 Days	12 Days	12 Days	60 Days	5 Days	60 Days	5 Days	60 Days	60 Days	60 Days	60 Days	60 Days	60 Days
Hardness Classification	HRC	HV	HS	HBW	-	HMV	HR15N	HR30TS	HRBS	D-HRB	HLD	HRC ～ HV	HRES	HNW	HR15TS	HR30N	HRA	HRFS	UMV	-	HV	-	HR15N ～ HRC	HLD	-	-	-	-	-	HBW