- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 21/4/2024 to 0:00 (CET) 22/4/2024. We apologize for the inconvenience.
Magnet Stands
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
3-Point Clamp for PH Post Holder
NOGAJAPAN
[Features]
· The arm is strongly locked by a special clamp with a 3-point tightening system.› Configure nowStarting from∗ ： 42.92 € Min. Shipping Days ： 11 Days *Unit price with basic configuration
-
45 mm Clamp
NOGAJAPAN
[Features]
· The strong CS4550 clamp with its special soft grip expands onto round and flat surfaces up to 45 mm.› Configure nowStarting from∗ ： 88.71 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Dial Gauge / Magnet Holder for Mounting Test Indicator Arm Type
NOGAJAPAN
A holding implement for a test indicator / dial gauge.
[Features]
· Tightening knob equipped with Noga's original disc spring and bearing integrated mechanism in the central section, securely locking the arm in place.
· The tip fine adjustment mechanism facilitates easy zero-point setting (excluding NF2021).
[Applications]
· It is perfect for holding a test indicator / dial gauge.› Configure nowStarting from∗ ： 117.79 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Attachment For Modular Arm, Parts Classification: For Arm Type
NOGAJAPAN
Assembly screw attachment.
[Features]
· For modular arm.
· A system for mounting instruments, cameras, monitors, etc.
· Enables arm assembly, and combined with the modular arm it meets any user needs.
[Applications]
· For modular arm assembly.- Volume Discount
› Configure nowStarting from∗ ： 21.24 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Flexible Magnet Base
MISUMI
An essential item for work sites or inspection procedures. Providing low-priced products with excellent cost performance [C-Value]
*Mounting hole ø6.5 on P.598 of the paper catalog is incorrect.
It should read ø6, ø8.› Configure nowStarting from∗ ： 58.54 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Magnet Base Lock Type
NIIGATA SEIKI
Magnet stand that can lock everything with one knob.
[Features]
· With mechanical lock knob tightening operation, joints can be locked at the same time.
· Magnets can be turned On/Off and attached/detached with lever operation.
[Applications]
· Used as a measuring holding tool for dial gauges / dial indicators (lever type).› Configure nowStarting from∗ ： 108.61 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 123.87 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 232.05 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Magnet Holder for Mounting Dial Gauges / Test Indicators, Arm Type / Manual Fine Adjustment System
MISUMI
Arm material is aluminium or steel.
Equipped with fine adjustment system on hand (single action fine adjustment feed mechanism, omnidirectional fine adjustment mechanism).
The magnetic main body can be switched ON/OFF.
Particle numbers with single-action fine-adjustment feed mechanism
-DG10503
-MG10503
-NF10403
Particle numbers with omni-directional hand fine-adjustment mechanism
-NF1021.- Volume Discount
› Configure nowStarting from∗ ： 166.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Nogaflex Omni Directional Arm with Permanent Magnet and Fine Adjustment Mechanism
NOGAJAPAN
[Features]
· On-hand fine adjustment without touching the arm. As the minute feed gear for the gauge is immediately above the magnet, the gauge can be zeroed instantaneously without shaking.
· Popeye Noga Flex is a small magnetic base typifying Noga's products.
· NF1030 magnets have a width of 16 mm for easy use even in narrow places› Configure nowStarting from∗ ： 192.48 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Magnet Holder with Dial Gauge
MISUMI
Arm material is aluminum or steel.
Equipped with a tip fine adjustment system.
The magnet main body can be switched ON/OFF.- Volume Discount
› Configure nowStarting from∗ ： 170.54 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Modular Arms
MISUMI
[Features]
NOGA's modular arm system allows you to assemble an arm that suits your needs by using a dedicated arm and mounting thread.
[Application]
Modular arm for mounting cameras, monitors and other devices as test indicators, etc.- Volume Discount
› Configure nowStarting from∗ ： 141.15 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Magnet Holder with Dial Gauge
NOGAJAPAN
A magnetic stand provided with a dial gauge.
[Features]
· MG6150 is a heavyweight dial gauge holder set. With 80 kgf On/Off magnet.
· DG6150 is a standard dial gauge holder set. With 80 kgf On/Off magnet.
· NF6150 is a mini holder set. Has a 32 kgf on/off magnet.
[Applications]
· Convenient for magnetic holder when making measurement.› Configure nowStarting from∗ ： 267.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 507.26 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Noga Heavy-Duty Clamp Holder MG1400
NOGAJAPAN
[Features]
· 2" and 3" clamps are attached to both sides of the heavy duty long arm (MG1015).
· With 2" clamp (50 mm) and 3" clamp (75 mm).- Volume Discount
› Configure nowStarting from∗ ： 296.85 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Attachment for Modular Arm, Part Division: for Arm Type
MISUMI
By combining with the attachment for modular arm, arms that meet various demands can be assembled.- Volume Discount
› Configure nowStarting from∗ ： 29.47 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Magnet Holder for Mounting Dial Gauges / Test Indicators, Strut Type
MISUMI
[Features]
Magnetic stand for attaching strut-type dial gauges and test indicators.
It has a fine adjustment mechanism that allows fine adjustment at hand.
Compact body with strong pull force.
Rotating clamp is attached to the tip of the arm, making it easy to determine the angle and length.
[Application]
Ideal for dial gauge measurement and test indicator installation.- Volume Discount
› Configure nowStarting from∗ ： 111.69 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Magnetic Base, Pull Force (N): 784
MISUMI
A standard magnetic base.
For holding a dial gauge.
An essential item for work sites or inspection procedures.
Providing low-priced products with excellent cost performance.› Configure nowStarting from∗ ： 32.03 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Mini Magnetic Base MB-6
NIIGATA SEIKI
Convenient magnetic stand that can be directly installed in narrow places and machinery, with fine movement enabled for easy positioning.
[Features]
· Uses samarium cobalt magnet with high adsorption power.
· Universal type which can be set at any angle.
· With a mechanical lock structure, setting and tightening is easy.
· Fine movement type. (Fine movement range 0.5 mm)
[Applications]
· Used as a measuring instrument holding tool for dial gauges / dial indicators (lever type).› Configure nowStarting from∗ ： 98.23 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Mini Magnetic Base, Fine Adjustment, Long
NIIGATA SEIKI
Fine motion type mini magnetic base that's resistant to temperature, excellent in mechanical strength and finely adjustable.
[Features]
· Magnet stand using Alnico magnets, strongly resistant to high temperature and with excellent mechanical strength.
· Two joint, long arm type with more connection joints than conventional products for more flexible movement.
· Fine movement type capable of fine adjustment via the fine adjustment screw. (Fine movement range 0.5 mm)
[Applications]
· Used as a measuring instrument holding tool for dial gauges / dial indicators (lever type).› Configure nowStarting from∗ ： 93.28 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Magnet Base Flexible Type
NIIGATA SEIKI
Magnetic base with a flexible shaft that enables simple positioning and can be fixed with a single touch of the handle.
[Features]
· Magnetic stand where magnets can be turned On/Off and attached/detached with lever operation.
[Applications]
· Used as a measuring holding tool for dial gauges / dial indicators (lever type).› Configure nowStarting from∗ ： 80.97 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Magnet Base Thick Main Post Type
NIIGATA SEIKI
With thick main-pillar type main pillar and support pillar, the magnetic base enables stable holding.
[Features]
· Main pillar and support pillar are thick specification. Magnetic stand that keeps the measuring instrument stable.
· Magnets can be turned On/Off and attached/detached with lever operation.
[Applications]
· Used as a measuring holding tool for dial gauges / dial indicators (lever type).› Configure nowStarting from∗ ： 56.96 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Magnet Base Mini Type
NIIGATA SEIKI
Convenient magnetic base that can be directly installed in narrow places and machinery.
[Features]
· A small magnetic stand ideal for tight spaces.
· Magnets can be turned On/Off and attached/detached with lever operation.
[Applications]
· Used as a measuring holding tool for dial gauges / dial indicators (lever type).› Configure nowStarting from∗ ： 56.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Mini Magnetic Base MB-7
NIIGATA SEIKI
Incredibly convenient magnet stand that can lock everything with one knob and be directly attached to narrow locations and machines.
[Features]
· With mechanical lock knob operation, 3 joints can be tightened at the same time.
· Magnets can be turned On/Off and attached/detached with lever operation.
[Applications]
· Used as a measuring holding tool for dial gauges / dial indicators (lever type).› Configure nowStarting from∗ ： 104.44 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Magnet Base Standard Type
NIIGATA SEIKI
A magnetic stand used as a measuring holding tool for dial gauges / dial indicators (lever type).
[Features]
· Standard type in which magnets can be turned On/Off and attached/detached with lever operation.
[Applications]
· Used as a measuring holding tool for dial gauges / dial indicators (lever type).› Configure nowStarting from∗ ： 41.53 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Mini Magnetic Base B-2
NIIGATA SEIKI
Magnetic stand that can be directly installed in narrow places and machinery.
[Features]
· Alnico magnets are used, so it is strongly resistant to high temperatures and has excellent mechanical strength.
· Fixed type.
[Applications]
· It can be used as a holding assembly for measuring instruments for dial indicators (lever type).› Configure nowStarting from∗ ： 51.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Mini Magnetic Base B-5
NIIGATA SEIKI
Universal type mini magnetic base that can be set at all angles, using a samarium cobalt magnet with high adsorption power.
[Features]
· Magnetic stand using a samarium cobalt magnet with high adsorption power.
· Universal type which can be set at any angle.
· With a mechanical lock structure, setting and tightening is easy.
[Applications]
· Can be used as a measuring instrument holding tool for dial gauges / dial indicators (lever type).› Configure nowStarting from∗ ： 86.01 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Mini Magnetic Base, Fine Adjustment
NIIGATA SEIKI
Magnetic stand that can be directly installed in narrow places and machinery, with fine movement enabled for easy positioning.
[Features]
· Alnico magnets are used, so it is strongly resistant to high temperatures and has excellent mechanical strength.
· 90 mm long arm type capable of measuring distant positions.
· Fine movement type. (Fine movement range 0.5 mm)
[Applications]
· It can be used as a holding assembly for measuring instruments for dial indicators (lever type).› Configure nowStarting from∗ ： 60.99 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Magnet Base with Micromotion Adjustment
NIIGATA SEIKI
A type of magnetic base for miniscule motion that makes it is easy to position the dial gauge and indicator.
[Features]
· Fine movement type (2 mm fine movement range) that is easy to adjust.
· Magnetic stand where magnets can be turned On/Off and attached/detached with lever operation.
[Applications]
· Can be used as a measuring holding tool for dial gauges / dial indicators (lever type).› Configure nowStarting from∗ ： 48.54 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Flex Arm, Comes with Adjustable Mechanism
NOGAJAPAN
Flexible magnetic stand.
[Features]
· The surface of the arm has a black, non-chrome finish.
· Used for centering by hanging from the spindle.
· NF1015: Without fine adjustment mechanism.
· NF1022: With fine adjustment mechanism.
[Applications]
· Ideal for magnetic stand arms.› Configure nowStarting from∗ ： 122.22 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Modular Articulated Arm
NOGAJAPAN
Modular arm that enables arm assembly by using an assembly screw attachment suited to user needs.
[Features]
· DG60003: Standard modular arm. With M6 x M6 inner diameter thread.
· MG70003: Heavyweight long modular arm. With M8 x M6 inner diameter thread (lower arm, upper arm).
· MA60003: Big Boy Modular Arm. [M10 x 1.25] x M6 inner diameter thread is included.
· Enables subtle angle and height adjustment of cameras, monitors, lights, etc., leaving them securely fixed for a long periods of time.
· All arms have black finish.
[Applications]
· Can be used widely for movies or photographing still images, etc.- Volume Discount
- Stock
› Configure nowStarting from∗ ： 101.34 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 86.37 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Flexible Clamps
KANETEC
[Features]
· Employs a magnet holder with powerful ON/OFF switching capability so it can easily be installed on a steel working table or machine tool processing table.
· A powerful plastic clamper is used for the clamp part, and it can be tilted flexibly.
· The clamper opens to a maximum of 30 mm and can move up and down within a range of approximately 90 mm.
· The clamper can also be replaced (sold separately)› Configure nowStarting from∗ ： 380.59 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 680.59 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Magnetic Base
TRUSCO NAKAYAMA
[Features]
· Including dial gauges with "ears", this supports almost all dial gauges and test indicators.
· Arm tip adopts a multi-clamp system with 6 mm, 8 mm and 3/8 inch holes as well as a dovetail groove.
[Applications]
· Can be used as a holder for measuring instruments.› Configure nowStarting from∗ ： 60.18 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Magnetic Base (Micro-Motion Type)
TRUSCO NAKAYAMA
[Features]
· Adjuster can be used to make fine adjustment to the retention direction of measuring instruments, etc. (Fine movement range: 2 mm)
[Applications]
· Can be used as a holder for measuring instruments.› Configure nowStarting from∗ ： 69.64 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Magnetic Base (Thick Beam Type)
TRUSCO NAKAYAMA
[Features]
· Main column and strut are of a thick specification that allows measurement tools to be retained with stability.
[Applications]
· Can be used as a holder for measuring instruments.› Configure nowStarting from∗ ： 79.24 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Mini Type Magnetic Base
TRUSCO NAKAYAMA
[Features]
· Small and lightweight handy type with an adsorption force of 250 N.
[Applications]
· Can be used as a holder for measuring instruments.› Configure nowStarting from∗ ： 89.87 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Magnetic Mini Base
TRUSCO NAKAYAMA
[Features]
· It can be set at any angle with a single touch.
· There is no ON/OFF switching for the magnet.› Configure nowStarting from∗ ： 49.61 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Drawing Holder
TRUSCO NAKAYAMA
[Features]
· Easily attachable magnet type.
[Applications]
· For management and display of drawings.› Configure nowStarting from∗ ： 103.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Magnetic Base
TRUSCO NAKAYAMA
[Features]
· A flexible shaft type that can be bent freely, with single-action handle fixation.
[Applications]
· Can be used as a holder for measuring instruments.› Configure nowStarting from∗ ： 102.35 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Magnetic Base, Holding Force (N): 1,000, Weight (g): 1700
TRUSCO NAKAYAMA
[Features]
· Can be instantaneously fixed in various positions using the lock knob.
[Applications]
· Can be used as a holding tool for dial gauges, dial indicators, etc.› Configure nowStarting from∗ ： 110.86 € Min. Shipping Days ： 11 Days *Unit price with basic configuration
-
Magnetic Base (Small Type)
TRUSCO NAKAYAMA
[Features]
· Small size magnetic base with lock function.
[Applications]
· Can be used as a holding tool for dial gauges, dial indicators, etc.› Configure nowStarting from∗ ： 103.63 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Parts For Magnetic Base (Post Type)
TRUSCO NAKAYAMA
Parts for a Magnetic Base (Post Type).
This product is a maintenance part of the magnetic base.› Configure nowStarting from∗ ： 4.25 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Magnetic Base (Arm Type) for Parts
TRUSCO NAKAYAMA
Accessory for magnetic base (arm type) made by Trusco Nakayama› Configure nowStarting from∗ ： 4.08 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Product Type |
| Parts Classification |
| Size |
| Adsorption Power(N) |
| Mounting of measuring device |
| Dovetail Groove Y/N |
| Mounting Screw |
| Main pillar(mm) |
| Post(mm) |
| Magnet width(mm) |
| Magnet Depth(mm) |
| Magnet Height(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NOGAJAPAN | NOGAJAPAN | NOGAJAPAN | NOGAJAPAN | MISUMI | NIIGATA SEIKI | NOGAJAPAN | NOGAJAPAN | MISUMI | NOGAJAPAN | MISUMI | MISUMI | NOGAJAPAN | NOGAJAPAN | NOGAJAPAN | MISUMI | MISUMI | MISUMI | NIIGATA SEIKI | NIIGATA SEIKI | NIIGATA SEIKI | NIIGATA SEIKI | NIIGATA SEIKI | NIIGATA SEIKI | NIIGATA SEIKI | NIIGATA SEIKI | NIIGATA SEIKI | NIIGATA SEIKI | NIIGATA SEIKI | NOGAJAPAN | NOGAJAPAN | NOGAJAPAN | KANETEC | KANETEC | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA |
| Product Series | Dial Gauge / Magnet Holder for Mounting Test Indicator Arm Type | Attachment For Modular Arm, Parts Classification: For Arm Type | Dial Gauge / Magnet Holder for Mounting Test Indicator Arm Type / Hand Fine Adjustment System | Long Arm Heavy Grade Dial Gauge Holder with Arm End Fine Adjustment Mechanism | Magnet Holder for Mounting Dial Gauges / Test Indicators, Arm Type / Manual Fine Adjustment System | Nogaflex Omni Directional Arm with Permanent Magnet and Fine Adjustment Mechanism | Magnet Holder for Mounting Dial Gauges / Test Indicators, Strut Type | Dial Gauge / Magnet Holder for Mounting Test Indicator Fulcrum Type | |||||||||||||||||||||||||||||||||||||
| Starting from∗ | 42.92 € *Unit price with basic configuration | 88.71 € *Unit price with basic configuration | 117.79 € *Unit price with basic configuration | 21.24 € *Unit price with basic configuration Volume Discount | 58.54 € *Unit price with basic configuration | 108.61 € *Unit price with basic configuration | 123.87 € *Unit price with basic configuration | 232.05 € *Unit price with basic configuration | 166.00 € *Unit price with basic configuration Volume Discount | 192.48 € *Unit price with basic configuration | 170.54 € *Unit price with basic configuration Volume Discount | 141.15 € *Unit price with basic configuration Volume Discount | 267.42 € *Unit price with basic configuration | 507.26 € *Unit price with basic configuration | 296.85 € *Unit price with basic configuration Volume Discount | 29.47 € *Unit price with basic configuration Volume Discount | 111.69 € *Unit price with basic configuration Volume Discount | 32.03 € *Unit price with basic configuration | 98.23 € *Unit price with basic configuration | 93.28 € *Unit price with basic configuration | 80.97 € *Unit price with basic configuration | 56.96 € *Unit price with basic configuration | 56.74 € *Unit price with basic configuration | 104.44 € *Unit price with basic configuration | 41.53 € *Unit price with basic configuration | 51.34 € *Unit price with basic configuration | 86.01 € *Unit price with basic configuration | 60.99 € *Unit price with basic configuration | 48.54 € *Unit price with basic configuration | 122.22 € *Unit price with basic configuration | 101.34 € *Unit price with basic configuration Volume Discount | 86.37 € *Unit price with basic configuration | 380.59 € *Unit price with basic configuration | 680.59 € *Unit price with basic configuration | 60.18 € *Unit price with basic configuration | 69.64 € *Unit price with basic configuration | 79.24 € *Unit price with basic configuration | 89.87 € *Unit price with basic configuration | 49.61 € *Unit price with basic configuration | 103.27 € *Unit price with basic configuration | 102.35 € *Unit price with basic configuration | 110.86 € *Unit price with basic configuration | 103.63 € *Unit price with basic configuration | 4.25 € *Unit price with basic configuration | 4.08 € *Unit price with basic configuration |
| Min. Shipping Days | 11 Days | 5 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 7 Days | 6 Days | 6 Days | 7 Days | 7 Days | 8 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 9 Days | 6 Days | 6 Days | 6 Days | 7 Days | 6 Days | 6 Days | 11 Days | 6 Days | 6 Days | 6 Days |
| Specifications |
| ||||||||||||||||||||||||||||||||||||||||||||
| Product Type | Magnetic Stand Parts | Magnetic Stand Parts | Magnetic Stand (Arm Type) | Magnetic Stand Parts | Magnetic Stand (Flexible Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Arm Type) | Magnetic Stand (Arm Type) | Magnetic Stand (Arm Type) | Magnetic Stand (Arm Type) | Magnetic Stand (Arm Type) | Magnetic Stand Parts | Magnetic Stand (Arm Type) | Magnetic Stand (Arm Type) | Magnetic Stand Parts | Magnetic Stand Parts | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Arm Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Flexible Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand Parts | Magnetic Stand Parts | Magnetic Stand (Strut Type) | Magnetic Stand (Work Holder Type) | Magnetic Stand (Work Holder Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Flexible Type) | Magnetic Stand (Arm Type) | Magnetic Stand (Arm Type) | Magnetic Stand Parts | Magnetic Stand Parts |
| Parts Classification | For post-type | - | - | For Arm Type | - | - | - | - | - | - | - | For Arm Type | - | - | For Arm Type | For Arm Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | For Arm Type | - | - | - | - | - | - | - | - | - | - | - | - | For post-type | For Arm Type |
| Size | - | - | Large Type / Small | - | - | Small | Large Type | - | Small | Small | Small | Large Type / Small | Small | - | - | - | Small | - | Small | Small | Small | Small | Small | Small | Small | Small | Small | Small | Small | - | - | Small | - | - | - | - | - | - | - | - | - | - | Small | - | - |
| Adsorption Power(N) | - | - | 320 ～ 1300 | - | 784 | 1000 | 320 ～ 800 | 800 | 313 ～ 784 | 280 (Permanent Magnet) | 313 ～ 784 | - | 320 | 1000 | - | - | 313 ～ 980 | 784 | 200 | 85 | 800 | 800 | 250 | 250 | 800 | 80 | 200 | 65 | 800 | - | - | 320 | 1000 | 1000 | 800 | 800 | 800 | 250 | 200 | 800 | 800 | 1000 | 250 | - | - |
| Mounting of measuring device | - | - | φ6、φ8 ～ ø6, ø8, ø3/8-Inch | - | - | φ6、φ8 | φ6、φ8 | ø6, ø8, ø3/8-Inch | Ø 6, Ø 8 | φ8 (6 x 8 mm, with Adapter) | - | - | - | - | - | - | Ø 6, Ø 8, Ø 3/8 Inch | - | φ8 | φ6 | φ6、φ8 | φ6、φ8 | φ6 | φ6、φ8 | φ6、φ8 | φ6 | φ6、φ8 | φ6 | φ6、φ8 | - | - | ø6, ø8, ø3/8-Inch | - | - | ø6, ø8, ø3/8-Inch, with Lug | ø6, ø8, with Lug | ø6, ø8, with Lug | φ6 | φ6 | - | φ6、φ8 | φ6、φ8 | φ6、φ8 | - | - |
| Dovetail Groove Y/N | - | - | Available | - | Available | Available | Available | Available | Available | Available | N/A | - | - | - | - | - | Available | Available | Available | Available | Available | Available | Available | Available | Available | N/A | N/A | Available | Available | - | - | Available | - | - | Available | N/A | N/A | N/A | N/A | N/A | Available | Available | Available | - | - |
| Mounting Screw | - | - | - | - | M8 x 1.25 | M8 x 1.25 | - | M8 x 1.25 | - | - | - | - | - | 1/4" | - | - | - | M8 x 1.25 | M5×0.8 | M5×0.8 | M8 x 1.25 | M8 x 1.25 | M5×0.8 | M5×0.8 | M8 x 1.25 | M5×0.8 | M5×0.8 | M5×0.8 | M8 x 1.25 | - | - | - | - | - | M8 x 1.25 | M8 x 1.25 | M8 x 1.25 | M5×0.8 | - | - | M8 x 1.25 | M8 x 1.25 | M5×0.8 | - | - |
| Main pillar(mm) | - | - | 56 ～ 326 | - | - | - | 56 ～ 133 | - | 56 ～ 133 | - | 56 ～ 133 | 56 ～ 326 | 56 | - | - | - | 120 ～ 260 | 176 | - | - | - | - | - | - | - | - | - | - | - | - | 56 ～ 326 | 120 | - | - | 177 | 176 | 178 | 54 | - | - | 340 | - | - | - | - |
| Post(mm) | - | - | 51 ～ 242 | - | - | - | 51 ～ 113 | - | 51 ～ 113 | - | 51 ～ 113 | 51 ～ 242 | 51 | - | - | - | 110 ～ 225 | 165 | - | - | - | - | - | - | - | - | - | - | - | - | 51 ～ 242 | 110 | - | - | 164 | 150 | 165 | - | - | - | - | - | - | - | - |
| Magnet width(mm) | - | - | 30 ～ 50 | - | 60 | 50 | 30 ～ 50 | 50 | 30 ～ 50 | 16 | 30 ～ 50 | - | 30 | 50 | - | - | 30 ～ 50 | 60 | φ35 | 25 | 50 | 50 | 30 | 30 | 50 | φ25 | φ35 | 25 | 50 | - | - | 30 | 50 | 50 | 50 | 50 | 50 | 30 | 31 | 50.5 | 50 | 50 | 30 | - | - |
| Magnet Depth(mm) | - | - | 40 ～ 120 | - | 50 | 75 | 40 ～ 60 | 60 | 40 ～ 60 | 60 | 40 ～ 60 | - | 40 | 75 | - | - | 40 ～ 75 | 50 | φ35 | 25 | 60 | 60 | 35 | 35 | 60 | φ25 | φ35 | 25 | 60 | - | - | 40 | 73 | 73 | 60 | 60 | 60 | 35 | 31 | 65 | 60 | 75 | 35 | - | - |
| Magnet Height(mm) | - | - | 35 ～ 55 | - | 55 | 55 | 35 ～ 55 | 55 | 35 ～ 55 | 32 | 35 ～ 55 | - | 35 | 55 | - | - | 35 ～ 55 | 55 | 32 | 30 | 55 | 55 | 35 | 35 | 55 | 30 | 32 | 30 | 55 | - | - | 35 | 55 | 55 | 55 | 55 | 55 | 35 | 33 | 55.7 | 55 | 55 | 35 | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Product Type
-
Parts Classification
-
Size
-
Adsorption Power(N)
- 65
- 80
- 85
- 200
- 250
- 280 (Permanent Magnet)
- 313
- 320
- 784
- 800
- 980
- 980.6
- 1000
- 1300
-
Mounting of measuring device
-
Dovetail Groove Y/N
-
Mounting Screw
-
Main pillar(mm)
-
Post(mm)
-
Magnet width(mm)
-
Magnet Depth(mm)
-
Magnet Height(mm)
Brand
CAD data type
-
- 2D
- 3D
Categories related to Magnet Stands
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.